Easy access to adjust coilovers

Skinzaholic · 01-19-2016, 07:01 PM

I was walking through Home Depot looking for something that I could repurpose to give me easy access to the top of my coilovers. This is what I came up with.

kenchan · 01-19-2016, 07:44 PM

dont tell me those are kitchen sink disposer covers...

onzedge · 01-19-2016, 07:47 PM

Quote:

Originally Posted by kenchan

dont tell me those are kitchen sink disposer covers...

No -- those are toilet flapper valves. Now, when on the road and there is no gas station near and one has to go -- there is a solution. Brilliant.

daj349 · 01-19-2016, 07:49 PM

i mean... you only really need a hole big enough to fit an allen wrench through.

Mine are like 0.5" OD

Skinzaholic · 01-19-2016, 07:56 PM

Seemed like a good idea at the time, and now I feel like an idiot, lol. I first did a really small hole but was off on my measurement and had to come up with something.

kenchan · 01-19-2016, 08:02 PM

Quote:

Originally Posted by onzedge

No -- those are toilet flapper valves. Now, when on the road and there is no gas station near and one has to go -- there is a solution. Brilliant.

Fantastic!!

onzedge · 01-19-2016, 08:06 PM

Quote:

Originally Posted by kenchan

Fantastic!!

It's genius.

onzedge · 01-19-2016, 08:07 PM

Quote:

Originally Posted by Skinzaholic

Seemed like a good idea at the time, and now I feel like an idiot, lol. I first did a really small hole but was off on my measurement and had to come up with something.

We have all done stuff like this -- it's all part of the learning curve.

Leingod · 01-19-2016, 08:35 PM

Quote:

Originally Posted by onzedge

We have all done stuff like this -- it's all part of the learning curve.

I must have been ahead of the curve.

Mrs. Teacher, what's the bell curve?

Shut up Jimmy!

onzedge · 01-19-2016, 08:41 PM

Quote:

Originally Posted by Leingod

I must have been ahead of the curve.

Mrs. Teacher, what's the bell curve?

Shut up Jimmy!

Rusty · 01-19-2016, 11:19 PM

Quote:

Originally Posted by Skinzaholic

I was walking through Home Depot looking for something that I could repurpose to give me easy access to the top of my coilovers. This is what I came up with.

WTF you guys talking about? There's no picture!

axmea? · 01-20-2016, 12:45 AM

Avoid the headache. It sounds like you cut a big hole based on what the guys are saying.

01-19-2016, 07:01 PM	#1 (permalink)
Skinzaholic Base Member Join Date: Dec 2015 Location: Bowling Green KY Posts: 24 Drives: 09 370Z Nismo MB 6MT Rep Power: 10	Easy access to adjust coilovers I was walking through Home Depot looking for something that I could repurpose to give me easy access to the top of my coilovers. This is what I came up with. Last edited by Skinzaholic; 01-19-2016 at 08:03 PM.

01-19-2016, 07:49 PM	#4 (permalink)
daj349 Base Member Join Date: Nov 2014 Location: Nashville, TN Posts: 49 Drives: '12 370Z SprtTour M6 Rep Power: 11	i mean... you only really need a hole big enough to fit an allen wrench through. Mine are like 0.5" OD __________________ K&N Typhoon \| CNT HFC \| Berk CBE \| Stance True-Types \| UpRev

01-20-2016, 12:45 AM	#12 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,236 Drives: WELL ZED PW 6MT Rep Power: 53241	Avoid the headache. It sounds like you cut a big hole based on what the guys are saying. onzedge and Ghostvette like this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete Last edited by axmea?; 01-20-2016 at 01:59 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lowered, now need to adjust headlights.	Kandy OrangeZ	Exterior & Interior	23	11-09-2022 03:44 AM
Cut hole in interior so I can adjust rear coilovers	mike12002us	Exterior & Interior	33	05-25-2020 12:18 AM
BC ER, SPL Install and Adjust	sandersd	Brakes & Suspension	46	08-11-2015 03:09 PM
can only adjust to 2.5 with spc camber kit!!	RyanWest	Brakes & Suspension	25	06-03-2013 09:54 AM
how to adjust ams short shifter??	Dan Z Man	Engine & Drivetrain	6	11-22-2010 10:59 PM

01-19-2016, 07:44 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	dont tell me those are kitchen sink disposer covers...

01-19-2016, 07:56 PM	#5 (permalink)
Skinzaholic Base Member Join Date: Dec 2015 Location: Bowling Green KY Posts: 24 Drives: 09 370Z Nismo MB 6MT Rep Power: 10	Seemed like a good idea at the time, and now I feel like an idiot, lol. I first did a really small hole but was off on my measurement and had to come up with something.