StopTech Pads rusted to my rotors

240se · 05-11-2015, 07:55 PM

I washed my Z Friday evening and then pulled it in my garage and didn't drive it for the rest of the weekend. Today I had bad vibration under braking. I looked at my rotors and this is what I found. I usually have some surface rust on my rotors after I wash my car and let it sit. The rust wears away on my first stop but this may take a while. For now on I'm going to drive it after I wash it then park it.

DEpointfive0 · 05-11-2015, 07:56 PM

Lemme guess...

You drove like a bat out of hell, then stopped and parked the car?

240se · 05-11-2015, 08:01 PM

Quote:

Originally Posted by DEpointfive0

Lemme guess...

You drove like a bat out of hell, then stopped and parked the car?

No, rotors were cold, washed the car and then left it parked for the weekend.

Spooler · 05-11-2015, 10:03 PM

It won't be an issue. It is about normal. They will just make noise for a bit until the rust wears off. Did it scare you when it made a clunk when you tried to pull off?

240se · 05-11-2015, 10:28 PM

I've had the pads stick to the rotors before but this left a rough spot on the rotors that caused bad vibration under braking. It seems to be slowly wearing off.

BGTV8 · 05-11-2015, 11:21 PM

5 stops from 60mph to 20mph one after the other and a 10 minute drive to cool it all down and it will be sweet.

Zoren 370 · 05-12-2015, 12:23 AM

^ you people from down under are smart imagine you figured that out.

need4speed255 · 05-12-2015, 12:39 AM

I just noticed the same thing on my car. I have stock everything though. The trick is to drive the car after you wash it so that the water does not sit between the rotor and pad which obviously leads to deep rusting.

BGTV8 · 05-12-2015, 12:57 AM

Quote:

Originally Posted by Zoren 370

^ you people from down under are smart imagine you figured that out.

Its the constant blood-rush to the head that does it.

Makes taking a cr4p interesting tho' ......... LoL

05-11-2015, 07:55 PM	#1 (permalink)
240se Enthusiast Member Join Date: Nov 2013 Location: VA Posts: 259 Drives: Gunmetal 12' Rep Power: 12	StopTech Pads rusted to my rotors I washed my Z Friday evening and then pulled it in my garage and didn't drive it for the rest of the weekend. Today I had bad vibration under braking. I looked at my rotors and this is what I found. I usually have some surface rust on my rotors after I wash my car and let it sit. The rust wears away on my first stop but this may take a while. For now on I'm going to drive it after I wash it then park it.

05-11-2015, 07:56 PM	#2 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Lemme guess... You drove like a bat out of hell, then stopped and parked the car? __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

05-11-2015, 10:28 PM	#5 (permalink)
240se Enthusiast Member Join Date: Nov 2013 Location: VA Posts: 259 Drives: Gunmetal 12' Rep Power: 12	I've had the pads stick to the rotors before but this left a rough spot on the rotors that caused bad vibration under braking. It seems to be slowly wearing off. Last edited by 240se; 05-12-2015 at 03:17 PM.

05-11-2015, 11:21 PM	#6 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,514 Drives: 09 Nissan 370Z M6 Rep Power: 39973	5 stops from 60mph to 20mph one after the other and a 10 minute drive to cool it all down and it will be sweet. AK370Z, DEpointfive0 and Zoren 370 like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan Akebono 14" Brake Kits, Hawk Pads, Stoptech Rotors, 370Z Sport	Coz@Czp	Suspension/Brakes	68	06-01-2018 12:23 PM
Stoptech Rotors, Hawk Pads, CZP Brake Lines, >>	Coz@Czp	Suspension/Brakes	71	02-09-2018 12:12 PM
CZP 2-Piece Rotors - Stoptech Rotors - Hawk Pads - SS Lines Great Prices & Quality!!	Coz@Czp	Suspension/Brakes	29	07-07-2017 01:30 PM
Brakes? DBA StopTech EBC Hawk Project MU Pads Rotors BBK	Joe@ZSpeed	Suspension/Brakes	15	01-05-2016 10:08 AM
[FOR SALE] Powdercoated AKEBONO calipers, 2piece rotors, ss lines, StopTech pads	kukpet	Parts for sale (Private Classifieds)	14	08-11-2014 11:53 PM

05-11-2015, 10:03 PM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,797 Drives: 2013 Nismo 370z Rep Power: 2684392	It won't be an issue. It is about normal. They will just make noise for a bit until the rust wears off. Did it scare you when it made a clunk when you tried to pull off?

05-12-2015, 12:23 AM	#7 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	^ you people from down under are smart imagine you figured that out.

05-12-2015, 12:39 AM	#8 (permalink)
need4speed255 Enthusiast Member Join Date: Oct 2014 Location: Indiana Posts: 262 Drives: 15Nsmo/99 EclipseGST Rep Power: 11	I just noticed the same thing on my car. I have stock everything though. The trick is to drive the car after you wash it so that the water does not sit between the rotor and pad which obviously leads to deep rusting.