Audio question

lexluther · 08-30-2019, 12:52 PM

Hey guys, I picked up the following Alpine receiver with android auto for a good price at Best Buy.

https://www.bestbuy.com/site/alpine-...?skuId=6333656

Can someone confirm if the 4 channel line output converter and the universal analog steering wheel interface are needed?

I have a 2017 Nismo no navi with Bose. Think I recall just the wiring harness, dash kit and maybe a cheaper steering wheel control connector. The 4 channel line output and steering wheel interface are about $70 each there.

Thanks

lexluther · 09-02-2019, 08:49 AM

Update: went ahead and installed it without the PAC and I got a bunch of white noise as well as the speakers being really loud at only volume 5 of like 30. (No harm done though)

Finally did a little bit of research on here and yep.. definitely do need the PAC to use the factory BOSE amp at the right frequencies or something. Very mechanical but not an audio guy at all, haha.

bigaudiofanat · 09-03-2019, 09:07 AM

You need a 7553. Plug in and done.

https://www.amazon.com/Metra-70-7553...tronics&sr=1-6

lexluther · 09-03-2019, 10:40 AM

Quote:

Originally Posted by bigaudiofanat

You need a 7553. Plug in and done.

https://www.amazon.com/Metra-70-7553...tronics&sr=1-6

Thanks man! I was hoping you were around!! I've been reading a lot of your posts. Looks like this harness already has the speaker wires coming out as RCA's? I'll order it up now

bigaudiofanat · 09-03-2019, 02:18 PM

Quote:

Originally Posted by lexluther

Thanks man! I was hoping you were around!! I've been reading a lot of your posts. Looks like this harness already has the speaker wires coming out as RCA's? I'll order it up now

No speaker wires on this one just RCA's these plug directly into the RCA outputs of your new alpine head unit.

lexluther · 09-06-2019, 05:08 PM

This worked great and was very easy to still^^^^^

09-03-2019, 09:07 AM	#3 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	You need a 7553. Plug in and done. https://www.amazon.com/Metra-70-7553...tronics&sr=1-6 __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about audio.....	discusfan	Audio & Video	14	12-06-2016 08:11 PM
audio question	scope22	Audio & Video	18	01-05-2016 08:34 AM
audio set up question	knightjustice	Audio & Video	21	01-12-2013 01:48 PM
audio question	srgjames	Audio & Video	5	11-29-2012 10:56 AM
Audio question	mark_taba85	Audio & Video	32	04-09-2011 05:39 PM

09-02-2019, 08:49 AM	#2 (permalink)
lexluther Base Member Join Date: Mar 2015 Location: IL Posts: 41 Drives: 2017 Nismo Rep Power: 6720	Update: went ahead and installed it without the PAC and I got a bunch of white noise as well as the speakers being really loud at only volume 5 of like 30. (No harm done though) Finally did a little bit of research on here and yep.. definitely do need the PAC to use the factory BOSE amp at the right frequencies or something. Very mechanical but not an audio guy at all, haha.

09-06-2019, 05:08 PM	#6 (permalink)
lexluther Base Member Join Date: Mar 2015 Location: IL Posts: 41 Drives: 2017 Nismo Rep Power: 6720	This worked great and was very easy to still^^^^^