Cooling my amps

DrNumbers

My thought was that I just needed to move the air a bit back there. I figured at least some of the heat will escape from under the carpet. I realize this isn't the most well thought out solution, but I figured I didn't need to to do much to solve the issue. I haven't had a problem for the past month driving for 2+ hours at mid-high volume. The issue popped up after playing my music at roughly 90-100 db for about an hour, following roughly 1.5-2 hours of playtime at mid-high volume.

The amp is running at 4 ohms. The gains should be correctly set as well. I'm not entirely sure, but I think a possible issue is the way the amps have been physically set up:

Amps.jpg

The cooling fins of the amp are flush against the amp rack on one side and very close to touching the carpet padding on the other side. I'm not sure if this is an issue as the whole top of the amp acts as a heatsink (as I understand it). Perhaps I should re-mount the amps?

Beautiful set-up by the way Ron. Wish I were in PA; I'd pester you to listen to your system. I'm entering the MECA street comp here in California coming up in the next week.

RonRizz

You may be right about the positioning of the amps. It may be as simple as putting slightly more space (if you can) Between them, or simply turning them over (bottom to top). If all else fails, a fan will definitely help... even under the carpet.
Good luck at your show, and thanks for the props...

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals