Custom Subwoofer Box

rrc86

I have a base model 2016 and wanted more from my stereo. I decided to put a subwoofer in to fix it.

I wanted a low profile box the would not be higher than the rear bar (I don't know the name of it), and I still wanted to have access to the spare tire. I've looked at pre-made boxes and they were too tall for what I wanted and made it difficult to get to the spare tire. So I decided to make one. I've included plans for this box, but it was made for the equipment I used, so adjust for what you have if you decide to use this design. I will not take responsibility for measurements being wrong for your equipment. Subwoofer installed is a MTX 3510-02. So far it hasn't shifted/moved even with some spirited driving.

Here is a picture of the finished product. (My upholstery work isn't the greatest)



Here is where I hid my amp and I know the wiring needs to be cleaned up. The box on the right is the factory bluetooth/phone module in case you were wondering.



I made a new "floor" for the hatch area. I made it in several parts so that I can get to the spare tire.





With the factory mat on, it's like I didn't do a thing.



The final product (again).



Low like I wanted



I can also reach the spare tire without pulling the box out. The side pieces can also be removed.



Here are the plans. Made with 3/4 inch MDF. It's just enough interior space for the sub I used.

daveb91

Is it just me or are there no pics

Raidernation

I don't see them.

__________________
2016 7AT GM Base: Fast Intentions CBE 18" Res, Z1 Rear Diff Cover, Quaife LSD, Nismo S-Sport Suspension, Nismo Body Brace Kit, White Line Front Sway Bar, SPL Front End Links, Energy Rear Bushing, Z1 Post MAF Silicone Tubes w/ K&N Drop-in Filters

rrc86

For some reason it didn't like it when I used pictures from my album. Should be fixed now.