2011 Red 370z Car Audio Build

Solid370z

Many thanks to bigaudiofanat for the awesome job he has done. He went back and forth for weeks answering any audio related questions I had.

This thread is worthless without pictures so let's get to work:



The stuff





Removal of stock stereo head unit




Alpine CDE-W265BT Double Din installed


Microphone Installation







Installing the JL Audio C3-650 speakers


The stock tweeter


New tweeter installed


Running wires to the JL Audio XD500/3v2






JL 10W0v3 10”


bigaudiofanat cheesing it

As you can see it's a job well done and I highly recommend bigaudiofanat for your installation if you are considering going with aftermarket audio. This guy went out of his way while it was snowing to get me back on the New Jersey Turnpike when my GPS started tripping out. Thanks once again for everything bud!

RonRizz

I like it. And it appears your in good hands with Matt leading the charge.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

chopin_guy88

Question on the amp install: that looks to be behind the driver or passenger seat on the floor. How did you wind up securing the amplifier?

I've been considering adding an amp and subwoofer, and would want to install in the same location...

Solid370z

Passenger seat. The wires are the only thing securing the amp. If I pull the amp it moves forward 2-3 inches max.

RonRizz

You may want to try some sticky-back Velcro on the bottom. It will secure it quite nicely.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Jaybo666

Which dash kit did you use? Nice fitment?

Solid370z

I didn't buy any dash kit but I was surprised at how good the fitment is.
The Alpine CDE-W265BT does not stick out like some of those head units you will see posted on here. I guess it all depends on the head unit.

bigaudiofanat

Good morning, the amps actually get held in place by the bottom of the seat once it is rolled back into place. Another way to do it is add a 1/2 piece of plywood to the dip behind the metal bump and secure to that. Yes Velcro will work as well. All are good wasy of securing the amps

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/