Questions about installing the Pioneer AVH-X4700BS

rahilr · 04-13-2015, 12:38 PM

Hi,

I am looking to buy/install (DIY) a Pioneer AVH-X4600BS in my 09' Touring. My car has the Bose system and I was reading up on the DIY page about installation and what is required, but got different advise from the sales rep at Crutchfield.ca.

This is the deck I am looking at buying:

Pioneer AVH-X4700BS DVD Receiver

I know i will need:

- dash kit
- satelite radio adapter
- steering wheel adapter

The sales rep said I wont need anything else (i.e. FM radio antenna, etc.), however the DIY sent me to the page below from autotoys, which says I also need:

Avic X930BT Nissan 370Z Bose Install

- antennae adapter
- differential converter
- wire harness

Has anyone installed this deck before/ could confirm what exactly I will need?

Thanks in advance
Richard

kenchan · 04-13-2015, 03:48 PM

ive done the install on my bose system in my G and i needed the antenna adapter (make sure you feed it switched 12v).

also used the rca plugs for the audio signal to feed into the bose amp.
my HU is a AVH4500BT with 4v pre-outs.

rahilr · 04-13-2015, 06:12 PM

thank you

kenchan · 04-13-2015, 08:28 PM

GL with the install.

04-13-2015, 12:38 PM	#1 (permalink)
rahilr Base Member Join Date: Mar 2015 Location: Markham Posts: 26 Drives: Nissan 370z 2009 Rep Power: 10	Questions about installing the Pioneer AVH-X4700BS Hi, I am looking to buy/install (DIY) a Pioneer AVH-X4600BS in my 09' Touring. My car has the Bose system and I was reading up on the DIY page about installation and what is required, but got different advise from the sales rep at Crutchfield.ca. This is the deck I am looking at buying: Pioneer AVH-X4700BS DVD Receiver I know i will need: - dash kit - satelite radio adapter - steering wheel adapter The sales rep said I wont need anything else (i.e. FM radio antenna, etc.), however the DIY sent me to the page below from autotoys, which says I also need: Avic X930BT Nissan 370Z Bose Install - antennae adapter - differential converter - wire harness Has anyone installed this deck before/ could confirm what exactly I will need? Thanks in advance Richard

04-13-2015, 03:48 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	ive done the install on my bose system in my G and i needed the antenna adapter (make sure you feed it switched 12v). also used the rca plugs for the audio signal to feed into the bose amp. my HU is a AVH4500BT with 4v pre-outs. rahilr likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
In the Middle of Installing Dynamat/Dynaliner … A Couple of Questions	40 to 332	DIY Section (Do-It-Yourself)	0	12-28-2014 09:54 PM
Finally done installing my Pioneer 4500, plus a center console AUX input, USB port	cossie1600	Audio & Video	9	05-05-2013 09:10 PM
Installing Project Kics Spacers (Questions)	DEpointfive0	Wheels & Tires	0	07-04-2012 01:23 PM
Pioneer AVH-P3400BH Questions	atw257	Audio & Video	5	04-11-2012 03:33 PM
Questions about installing the intakes and exhaust.	AdamX	Intake/Exhaust	14	08-04-2011 10:22 PM

04-13-2015, 06:12 PM	#3 (permalink)
rahilr Base Member Join Date: Mar 2015 Location: Markham Posts: 26 Drives: Nissan 370z 2009 Rep Power: 10	thank you

04-13-2015, 08:28 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	GL with the install.