Z1 Motorsports Silicone Post-MAF Hoses NOW IN AVAILABLE!

Dustin@Z1 · 07-08-2011, 04:31 PM

Everyone,
In response to the HUGE demand we have had for these, we now have these in stock and ready to ship! Like all other Z1 Silicone products for your Z or G, they are available in your choice of Red, Blue or Black.

For those of you who have not heard or know what the "Post-MAF" Hose is, it is the rubber, accordian hose that connects the factory air boxes to the throttle bodies. The factory hoses are massive and ugly when compared to the rest of the car. These silicone replacements offer both inproved underhood styling, a MUCH longer service life and improved air flow to the throttle bodies.

The Z1 Silicone Post-MAF hoses will fit the following vehicles:

'07+ Nissan 350Z (VQ35HR ONLY!)
'06+ Infiniti G35 Sedan (VQ35HR ONLY!)
'09+ Nissan 370Z (All models)
'08+ Infiniti G37 (Sedan & Coupe)

These Post-MAF tubes will work with the factory PCV system, however they do eliminate the factory air intake resonator on the Driver Side. When ordering you may also take advantage of a combo discount and purchase a pair K&N Drop-In Filters to complete your air intake system!

We have these instock and ready to ship today! PM me for shipping quote on this product or any other product you may be looking for.

Priced at $124.00 plus shipping!

Cmike2780 · 07-08-2011, 04:51 PM

Do you have any pics of these installed? How well do the aluminum PCV fittings work? I thought the stock fitting was angle.

Dustin@Z1 · 07-08-2011, 06:08 PM

Quote:

Originally Posted by Cmike2780

Do you have any pics of these installed? How well do the aluminum PCV fittings work? I thought the stock fitting was angle.

CMike,
I will have an installed pic for you tomorrow! I do not have a 370Z or G37 here at the moment with the stock style air intake (everything has either FI or aftermarket intakes).

You are correct. You can remove the Aluminum Fitting for the hoses if you wish to use the factory PCV pieces. They use a push in style, barbed fitting. If you want to use our Silicone PCV Breather Hoses, then you will use the Aluminum fitting. Sorry about that, thanks for pointing that out!

daisuke149 · 07-08-2011, 07:20 PM

Quote:

Originally Posted by Cmike2780

Do you have any pics of these installed? How well do the aluminum PCV fittings work? I thought the stock fitting was angle.

FL 4Motion · 07-08-2011, 09:00 PM

I foresee these in my near future.

Red__Zed · 07-08-2011, 09:03 PM

wow. these look clean.

wretched_z · 07-08-2011, 10:12 PM

Quote:

I will have an installed pic for you tomorrow! I do not have a 370Z or G37 here at the moment with the stock style air intake (everything has either FI or aftermarket intakes).

Will these work with the stillen g3 intakes, cause I have a nasty scratch on one of the upper tubes of the intakes.

Cmike2780 · 07-08-2011, 10:33 PM

Quote:

Originally Posted by wretched_z

Will these work with the stillen g3 intakes, cause I have a nasty scratch on one of the upper tubes of the intakes.

Errrr.... I'm gonna guess no.

wretched_z · 07-08-2011, 11:36 PM

Quote:

Originally Posted by wretched_z View Post
Will these work with the stillen g3 intakes, cause I have a nasty scratch on one of the upper tubes of the intakes.
Errrr.... I'm gonna guess no.

Never mind I misread the post.

daisuke149 · 07-08-2011, 11:53 PM

they might work. replace the upper tubes. i can check when im at z1 tomorrow.

Dustin@Z1 · 07-09-2011, 09:26 AM

Yeah...these will not fit with the Stillen Gen III's. The Gen III's use a smaller Outer Diameter piping. Our Post-Maf pipes are designed to connect to the air box and throttle bodies, which have a larger OD. We just tried it out to verify and it litterly slipped over the piping with no interference.

Dustin@Z1 · 07-09-2011, 02:10 PM

Here are few installed pics of our Z1 Post-MAF Tubes installed on '10Anamoly's 370Z. For a comparison, I have a pic of the stock intake and one with only the Post-MAF Tubes installed.

More installed pics to follow soon! I encourage anyone who has these installed to post up pics of their color combinations to show others.

FL 4Motion · 08-23-2011, 12:04 AM

Dustin/Z1 folks:

Got a quick ?. As per my sig, I've already got the k&n drop ins and I've gotten an UpRev tune for all my current mods. I'm really interested in picking up a set of these PMTs from you guys but I want to confirm that I don't require a retune to be able to run these either on the street or on the track. (I'm looking to pick these up before the car goes to the track day at ZNationals). Will the a/f ratio still be safe w/o updated tune? I suspect a retune might pull a couple more ponies out of the car but my main concern for the immediate future is the safety of running them until I retune next year.

Thanks.

Dustin@Z1 · 08-24-2011, 08:04 PM

Quote:

Originally Posted by FL 4Motion

Dustin/Z1 folks:

Got a quick ?. As per my sig, I've already got the k&n drop ins and I've gotten an UpRev tune for all my current mods. I'm really interested in picking up a set of these PMTs from you guys but I want to confirm that I don't require a retune to be able to run these either on the street or on the track. (I'm looking to pick these up before the car goes to the track day at ZNationals). Will the a/f ratio still be safe w/o updated tune? I suspect a retune might pull a couple more ponies out of the car but my main concern for the immediate future is the safety of running them until I retune next year.

Thanks.

A tune will definitly be worthwhile in the long run depending on the other mods you have performed since the last tune. However, you will not need one to safely run our Post-MAF Tubes and to track the car. Since we modeled the Z1 Silicone Post-MAF tubes off a stock set of Intake Tubes, we did not change the overall inner diameter of the piping. It is after the mass air flow (hence the name) which also explains why it will not affect the tune that much.

Glad to hear that you are coming up for the Nationals! I hope we can have a large # of 370Z's on track and in attendance spectating that day.

The Dimer · 09-23-2011, 12:15 PM

Quick question. I actually already bought a set of these and installed them this morning, but what are the silver connectors for that are included with tht tubes? I had to remove them to connect to the stock lines.

07-08-2011, 04:31 PM	#1 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 18	Z1 Motorsports Silicone Post-MAF Hoses NOW IN AVAILABLE! Everyone, In response to the HUGE demand we have had for these, we now have these in stock and ready to ship! Like all other Z1 Silicone products for your Z or G, they are available in your choice of Red, Blue or Black. For those of you who have not heard or know what the "Post-MAF" Hose is, it is the rubber, accordian hose that connects the factory air boxes to the throttle bodies. The factory hoses are massive and ugly when compared to the rest of the car. These silicone replacements offer both inproved underhood styling, a MUCH longer service life and improved air flow to the throttle bodies. The Z1 Silicone Post-MAF hoses will fit the following vehicles: '07+ Nissan 350Z (VQ35HR ONLY!) '06+ Infiniti G35 Sedan (VQ35HR ONLY!) '09+ Nissan 370Z (All models) '08+ Infiniti G37 (Sedan & Coupe) These Post-MAF tubes will work with the factory PCV system, however they do eliminate the factory air intake resonator on the Driver Side. When ordering you may also take advantage of a combo discount and purchase a pair K&N Drop-In Filters to complete your air intake system! We have these instock and ready to ship today! PM me for shipping quote on this product or any other product you may be looking for. Priced at $124.00 plus shipping! Last edited by Dustin@Z1; 07-09-2011 at 03:11 PM.

07-08-2011, 04:51 PM	#2 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	Do you have any pics of these installed? How well do the aluminum PCV fittings work? I thought the stock fitting was angle. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

07-09-2011, 02:10 PM	#12 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 18	Here are few installed pics of our Z1 Post-MAF Tubes installed on '10Anamoly's 370Z. For a comparison, I have a pic of the stock intake and one with only the Post-MAF Tubes installed. More installed pics to follow soon! I encourage anyone who has these installed to post up pics of their color combinations to show others. Last edited by Dustin@Z1; 07-09-2011 at 03:12 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Z1 Silicone Hoses!!!	Spencer@Z1	Z1 Motorsports	47	12-09-2016 12:59 PM
Z1 Silicone Radiator Hoses - RED, BLUE and BLACK	Dustin@Z1	Drivetrain/Engine	19	01-21-2015 11:33 AM
TUNERZ STORE \| HPS-Performance Silicone Air Intake Hoses	Tunerz_Store	Exhaust/Intake	90	01-28-2014 10:26 PM
HPS Intakes, Air Intake Hoses & Silicone Connectors	corsport	CorSport	5	10-05-2011 02:22 PM
FS: Cobb Black Silicone Post-MAF Tubes	'10Anamoly	Parts for sale (Private Classifieds)	21	07-16-2010 08:39 AM

07-08-2011, 09:00 PM	#5 (permalink)
FL 4Motion A True Z Fanatic Join Date: Feb 2009 Location: FL Posts: 4,776 Drives: Baby Shark Rep Power: 701615	I foresee these in my near future.

07-08-2011, 09:03 PM	#6 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	wow. these look clean.

07-08-2011, 11:53 PM	#10 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	they might work. replace the upper tubes. i can check when im at z1 tomorrow.

07-09-2011, 09:26 AM	#11 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 18	Yeah...these will not fit with the Stillen Gen III's. The Gen III's use a smaller Outer Diameter piping. Our Post-Maf pipes are designed to connect to the air box and throttle bodies, which have a larger OD. We just tried it out to verify and it litterly slipped over the piping with no interference.

08-23-2011, 12:04 AM	#13 (permalink)
FL 4Motion A True Z Fanatic Join Date: Feb 2009 Location: FL Posts: 4,776 Drives: Baby Shark Rep Power: 701615	Dustin/Z1 folks: Got a quick ?. As per my sig, I've already got the k&n drop ins and I've gotten an UpRev tune for all my current mods. I'm really interested in picking up a set of these PMTs from you guys but I want to confirm that I don't require a retune to be able to run these either on the street or on the track. (I'm looking to pick these up before the car goes to the track day at ZNationals). Will the a/f ratio still be safe w/o updated tune? I suspect a retune might pull a couple more ponies out of the car but my main concern for the immediate future is the safety of running them until I retune next year. Thanks.

09-23-2011, 12:15 PM	#15 (permalink)
The Dimer Track Member Join Date: Mar 2011 Location: Bolingbrook, IL Posts: 632 Drives: 2010 PW 370z Rep Power: 15	Quick question. I actually already bought a set of these and installed them this morning, but what are the silver connectors for that are included with tht tubes? I had to remove them to connect to the stock lines.