I Need Help

Merv · 01-17-2015, 08:55 AM

[QUOTE=Thadragon;3078159]I need some help from my fellow members!!!

I have these wheels: VARRSTOEN 2013 STYLE ES7 19X9.5 +12 19X11 +15 5X114.3 SILVER MACHINED WHEEL RIMS

If these are your offsets as you've stated,you will not need spacers. Back will sit pretty much flush and front will be poking out.

Merv · 01-17-2015, 09:01 AM

Also,I have never heard or seen it done,but you could look into seeing if a machine shop can possibly machine off 5 to10 mm on the back side of your front rims so that you have less poke in the front. Again I don't know if it's possible. Might compromise the integrity of the wheel.

01-17-2015, 08:55 AM	#1 (permalink)
Merv Track Member Join Date: Dec 2013 Location: Vancouver B.C Posts: 518 Drives: 11 GM grey sport tou Rep Power: 15	[QUOTE=Thadragon;3078159]I need some help from my fellow members!!! I have these wheels: VARRSTOEN 2013 STYLE ES7 19X9.5 +12 19X11 +15 5X114.3 SILVER MACHINED WHEEL RIMS If these are your offsets as you've stated,you will not need spacers. Back will sit pretty much flush and front will be poking out. __________________ Swift springs \| upgraded headlights \| stillen gen3 cai \| FI HFC's and FI CBE \| ecutek tune in the mail!

01-17-2015, 09:01 AM	#2 (permalink)
Merv Track Member Join Date: Dec 2013 Location: Vancouver B.C Posts: 518 Drives: 11 GM grey sport tou Rep Power: 15	Also,I have never heard or seen it done,but you could look into seeing if a machine shop can possibly machine off 5 to10 mm on the back side of your front rims so that you have less poke in the front. Again I don't know if it's possible. Might compromise the integrity of the wheel. __________________ Swift springs \| upgraded headlights \| stillen gen3 cai \| FI HFC's and FI CBE \| ecutek tune in the mail!