I Need Help

Merv · 01-17-2015, 08:55 AM

[QUOTE=Thadragon;3078159]I need some help from my fellow members!!!

I have these wheels: VARRSTOEN 2013 STYLE ES7 19X9.5 +12 19X11 +15 5X114.3 SILVER MACHINED WHEEL RIMS

If these are your offsets as you've stated,you will not need spacers. Back will sit pretty much flush and front will be poking out.

Merv · 01-17-2015, 09:01 AM

Also,I have never heard or seen it done,but you could look into seeing if a machine shop can possibly machine off 5 to10 mm on the back side of your front rims so that you have less poke in the front. Again I don't know if it's possible. Might compromise the integrity of the wheel.

Thadragon · 01-17-2015, 07:57 PM

Here it is!!!

[IMG]

[/IMG]

[IMG]

[/IMG]

Thadragon · 01-18-2015, 01:44 PM

[IMG]

[/IMG]

This is my current Alignment set up. What do you guys think?do i need more negative camber in the front?

Shirichqin · 04-23-2015, 05:12 AM

Oh hey! You're from Vegas too! I'd stick with -2 degree or so camber, that front poke is too much...

I bought about the same wheel specs. AG F211 wheels.. I think I'm going to need to ride on bags to make my shoes work lol.
19x9.5ET10
19x9.5ET-2

01-17-2015, 08:55 AM	#1 (permalink)
Merv Track Member Join Date: Dec 2013 Location: Vancouver B.C Posts: 518 Drives: 11 GM grey sport tou Rep Power: 15	[QUOTE=Thadragon;3078159]I need some help from my fellow members!!! I have these wheels: VARRSTOEN 2013 STYLE ES7 19X9.5 +12 19X11 +15 5X114.3 SILVER MACHINED WHEEL RIMS If these are your offsets as you've stated,you will not need spacers. Back will sit pretty much flush and front will be poking out. __________________ Swift springs \| upgraded headlights \| stillen gen3 cai \| FI HFC's and FI CBE \| ecutek tune in the mail!

01-17-2015, 09:01 AM	#2 (permalink)
Merv Track Member Join Date: Dec 2013 Location: Vancouver B.C Posts: 518 Drives: 11 GM grey sport tou Rep Power: 15	Also,I have never heard or seen it done,but you could look into seeing if a machine shop can possibly machine off 5 to10 mm on the back side of your front rims so that you have less poke in the front. Again I don't know if it's possible. Might compromise the integrity of the wheel. __________________ Swift springs \| upgraded headlights \| stillen gen3 cai \| FI HFC's and FI CBE \| ecutek tune in the mail!

01-17-2015, 07:57 PM	#3 (permalink)
Thadragon Base Member Join Date: Jun 2014 Location: Las vegas Posts: 122 Drives: 2014 370z sport edit Rep Power: 11	Here it is!!! [IMG][/IMG] [IMG][/IMG] Last edited by Thadragon; 01-17-2015 at 08:04 PM.

01-18-2015, 01:44 PM	#4 (permalink)
Thadragon Base Member Join Date: Jun 2014 Location: Las vegas Posts: 122 Drives: 2014 370z sport edit Rep Power: 11	[IMG][/IMG] This is my current Alignment set up. What do you guys think?do i need more negative camber in the front?

04-23-2015, 05:12 AM	#5 (permalink)
Shirichqin Base Member Join Date: Apr 2015 Location: Las Vegas Posts: 14 Drives: 2015 370z 6MT Rep Power: 10	Oh hey! You're from Vegas too! I'd stick with -2 degree or so camber, that front poke is too much... I bought about the same wheel specs. AG F211 wheels.. I think I'm going to need to ride on bags to make my shoes work lol. 19x9.5ET10 19x9.5ET-2