Need help with wheel fitment, yes I used google already.

KratikosG37 · 01-06-2015, 11:57 AM

THIS IS FOR A G37 NOT 370Z.

Google Image Result for http://www.workwheelsusa.com/media/g...9/600_full.jpg

What offset is this?

Have a TTG37 and was told its best to stay flush due to amount of wheel power I have.

Issue is I want to be aggressive as possible without taking away large amounts of traction.

Already installed a Spc camber kit, and have the wheels I want. Work DD.5 19's
9.5 front, and 11 inch rear.

What I gathered from doing research is +22 offset front, and +38 offset rear.

Just need to have more insight with someone that has a similar setup to the photo that is listed.

Fyi more lip the better

Thanks

DEpointfive0 · 01-06-2015, 12:00 PM

GTFO with your G37, lol

I'd only seen 19x9.5/10.5+22 all around on a G37, and it looked good

KratikosG37 · 01-06-2015, 12:42 PM

Quote:

Originally Posted by DEpointfive0

GTFO with your G37, lol

I'd only seen 19x9.5/10.5+22 all around on a G37, and it looked good

Yes hard to compare Z to a G, but 370z forum has more views then myg37.

More options the better, so GTFO? Lol

Aviator44 · 01-06-2015, 02:18 PM

Quote:

Originally Posted by KratikosG37

Google Image Result for http://www.workwheelsusa.com/media/g...9/600_full.jpg

What offset is this?

Have a TTG37 and was told its best to stay flush due to amount of wheel power I have.

Issue is I want to be aggressive as possible without taking away large amounts of traction.

Already installed a Spc camber kit, and have the wheels I want. Work DD.5 19's
9.5 front, and 11 inch rear.

What I gathered from doing research is +22 offset front, and +38 offset rear.

Just need to have more insight with someone that has a similar setup to the photo that is listed.

Fyi more lip the better

Thanks

Your offset is negligible when determining traction. Tire type and width is what will determine it. 9.5f/11r is a good setup for your car.

Those are decent sized offsets. On a 370z, 19x9.5 +20 and 19x11 +15 is nearly flush running a 245/40 and 305/30.

What size tires are you planning on running?

cooltoy · 01-06-2015, 02:19 PM

The wheels on the car referred to by the OP are 20X9.0 +18 F & 20X10.0 +23 R.

FPenvy · 01-06-2015, 02:24 PM

Quote:

Originally Posted by Aviator44

Your offset is negligible when determining traction. Tire type and width is what will determine it. 9.5f/11r is a good setup for your car.

Those are decent sized offsets. On a 370z, 19x9.5 +20 and 19x11 +15 is nearly flush running a 245/40 and 305/30.

What size tires are you planning on running?

don't you think a 60mm difference would throw it off too much?

I thought the goal was to try and stay within factory specs of 30mm and too big of a difference would induce more understeer?

9.5's he can run wider to stay with the 305s. i'm running 265/305 on stock sport rays currently.

Aviator44 · 01-06-2015, 02:30 PM

Quote:

Originally Posted by FPenvy

don't you think a 60mm difference would throw it off too much?

I thought the goal was to try and stay within factory specs of 30mm and too big of a difference would induce more understeer?

9.5's he can run wider to stay with the 305s. i'm running 265/305 on stock sport rays currently.

You're referring to the 30mm factory rear offset correct? Going from a 10" to an 11" rear wheel, the offset should be adjusted from 30mm to 15mm.

FPenvy · 01-06-2015, 02:32 PM

Quote:

Originally Posted by Aviator44

You're referring to the 30mm factory rear offset correct? Going from a 10" to an 11" rear wheel, the offset should be adjusted from 30mm to 15mm.

no the tire sizes you mentioned.

going to 60mm difference in width will most likely throw more understeer into the equation.

Aviator44 · 01-06-2015, 02:38 PM

Quote:

Originally Posted by FPenvy

no the tire sizes you mentioned.

going to 60mm difference in width will most likely throw more understeer into the equation.

Stock is 245/40R19 and 275/35R19 on a 370z. I suggested for his wheel widths that he run a 245/40/R19 and 305/30/R19 (or larger rear).

That's the same width for the front and a 30mm width increase for the rear.

Aviator44 · 01-06-2015, 02:41 PM

I meant to put 255/35/19R in my original post for a 10mm width increase over stock.

KratikosG37 · 01-06-2015, 02:59 PM

Quote:

Originally Posted by Aviator44

Your offset is negligible when determining traction. Tire type and width is what will determine it. 9.5f/11r is a good setup for your car.

Those are decent sized offsets. On a 370z, 19x9.5 +20 and 19x11 +15 is nearly flush running a 245/40 and 305/30.

What size tires are you planning on running?

245/40 275/35

Quote:

Originally Posted by Aviator44

Stock is 245/40R19 and 275/35R19 on a 370z. I suggested for his wheel widths that he run a 245/40/R19 and 305/30/R19 (or larger rear).

That's the same width for the front and a 30mm width increase for the rear.

That's the tires I already have.

After speaking to a few people, the tires are stretched in the at photo running -5 offset in the rear.

+22 front, and +38 rear is the best I can get without rubbing or stretching from what Ravspec is claiming.

cooltoy · 01-06-2015, 03:06 PM

Quote:

Originally Posted by cooltoy

The wheels on the car referred to by the OP are 20X9.0 +18 F & 20X10.0 +23 R.

This guy has the answer to your question.

KratikosG37 · 01-06-2015, 03:13 PM

Quote:

Originally Posted by cooltoy

This guy has the answer to your question.

Yep. Thank you. My comments we're about 19's, and what I had to do to have similar setup while still remaining flush.

cooltoy · 01-06-2015, 03:18 PM

I see.

I am not sure why the diameter of the rim will effect the offsets. As long as the width of the rims are the same, the offsets will look the same. I think?

Anyway, I thought you needed the question answered in your original post.

KratikosG37 · 01-06-2015, 04:01 PM

Quote:

Originally Posted by cooltoy

I see.

I am not sure why the diameter of the rim will effect the offsets. As long as the width of the rims are the same, the offsets will look the same. I think?

Anyway, I thought you needed the question answered in your original post.

Well, it don't actually. The reason why the offset is high is more traction. More the tire is on the ground more traction. 500whp -5 offset ill blow the tires easily.

Want a aggressive stands, but from what Ravspec said this is the only way I can have a little bit of both on my G.

01-06-2015, 11:57 AM	#1 (permalink)
KratikosG37 Enthusiast Member Join Date: Jun 2014 Location: New Orleans, LA Posts: 273 Drives: 09 TT Wrapped G37 Rep Power: 11	Need help with wheel fitment, yes I used google already. THIS IS FOR A G37 NOT 370Z. Google Image Result for http://www.workwheelsusa.com/media/g...9/600_full.jpg What offset is this? Have a TTG37 and was told its best to stay flush due to amount of wheel power I have. Issue is I want to be aggressive as possible without taking away large amounts of traction. Already installed a Spc camber kit, and have the wheels I want. Work DD.5 19's 9.5 front, and 11 inch rear. What I gathered from doing research is +22 offset front, and +38 offset rear. Just need to have more insight with someone that has a similar setup to the photo that is listed. Fyi more lip the better Thanks __________________ KratikosG37 Build Log http://www.myg37.com/forums/build-th...ml#post3888739 Last edited by KratikosG37; 01-07-2015 at 01:44 PM.

01-06-2015, 12:00 PM	#2 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	GTFO with your G37, lol I'd only seen 19x9.5/10.5+22 all around on a G37, and it looked good __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

01-06-2015, 02:19 PM	#5 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,973 Drives: 14 PW 370Z S/T MT Rep Power: 243722	The wheels on the car referred to by the OP are 20X9.0 +18 F & 20X10.0 +23 R. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang. Last edited by cooltoy; 01-06-2015 at 02:31 PM.

01-06-2015, 02:41 PM	#10 (permalink)
Aviator44 Enthusiast Member Join Date: May 2014 Location: Pensacola, FL Posts: 299 Drives: AAM Twin Turbo 370Z Rep Power: 11	I meant to put 255/35/19R in my original post for a 10mm width increase over stock. FPenvy likes this. __________________ www.aamcompetition.com AAM Twin Turbo System

01-06-2015, 03:18 PM	#14 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,973 Drives: 14 PW 370Z S/T MT Rep Power: 243722	I see. I am not sure why the diameter of the rim will effect the offsets. As long as the width of the rims are the same, the offsets will look the same. I think? Anyway, I thought you needed the question answered in your original post. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel fitment	memphisz.exe	Wheels & Tires	3	10-31-2014 02:17 PM
wheel fitment?	matrix_square	Wheels & Tires	4	09-19-2013 10:46 AM
Wheel Fitment	js1	Wheels & Tires	3	03-21-2012 03:15 PM
Help with wheel fitment...	tbss370z	Wheels & Tires	0	12-06-2009 07:35 PM
Wheel fitment..	zeebra	Wheels & Tires	4	04-03-2009 12:08 PM