How to make these fit

zefaulter · 12-22-2014, 12:25 AM

I made a foolish mistake of buying a set of wheels without proper research. I assumed the wheels I bought from a fellow member would fit my Z.

Front wheels do not fit because of the sports brake. Using a 20mm spacer, I can get the wheels' face to clear the brake but now I have this problem:

Currently running -1.6 camber front(stock alignment with mild drop). I was told by a wheel repair shop that they can take up to 5mm off the hub. so I'll need to take another 15mm in.

How much of a negative camber do I need to run to make these fit? Anyone dealt with fender pulling/camber thinks this can happen?

I have posted the wheels in FS section in case I can't pull this off

90 ST · 12-22-2014, 12:56 AM

Sell them. There is no making them look good on your Z...what did they come off of?

zefaulter · 12-22-2014, 06:58 AM

Z...

Zoren 370 · 12-22-2014, 07:08 AM

What size and offset those wheels have?

Zoren 370 · 12-22-2014, 07:09 AM

Quote:

Originally Posted by zefaulter

Z...

I guess from a non sport package Z?

zefaulter · 12-22-2014, 07:17 AM

Quote:

Originally Posted by Zoren 370

What size and offset those wheels have?

19x9.5 +15

With spacers they're -5

JC-Nismo · 12-22-2014, 07:18 AM

Sorry man, but don't destroy your Z with these. Work wheels are very popular and you'll get your money back soon. Put your stock wheels back on and continue with the sale as you are.

zefaulter · 12-22-2014, 08:14 AM

Quote:

Originally Posted by JC-Nismo

Sorry man, but don't destroy your Z with these. Work wheels are very popular and you'll get your money back soon. Put your stock wheels back on and continue with the sale as you are.

That's what I'm thinking too. it's too bad, I really like these

bullitt5897 · 12-22-2014, 09:15 AM

Sell them. The problem is not the offset but rather the backspace spec. These where built with a non sport in mind. Sorry to hear about the outcome. More wheels are always for sale on the forum.
Mike

zefaulter · 12-22-2014, 09:44 AM

Quote:

Originally Posted by bullitt5897

Sell them. The problem is not the offset but rather the backspace spec. These where built with a non sport in mind. Sorry to hear about the outcome. More wheels are always for sale on the forum.
Mike

Thanks for the realistic but positive post, Mike!

nismolucino · 12-22-2014, 12:23 PM

These are 2 piece correct? If so couldnt you just get new barrels or faces to change the offset?

90 ST · 12-22-2014, 12:59 PM

Quote:

Originally Posted by nismolucino

These are 2 piece correct? If so couldnt you just get new barrels or faces to change the offset?

If they are a real 2 piece one could, but would it be worth the $$ is the question.

Zerafian · 12-22-2014, 03:09 PM

Quote:

Originally Posted by 90 ST

If they are a real 2 piece one could, but would it be worth the $$ is the question.

no. Just resell them for the same price. Its actually the faces that are causing them not to fit, not the barrels

Unless youd be ok with running -3 to -4 camber up front. Youd probably need to buy front A arms at that point

Im not pointing fingers but if the seller didnt state they were "O disk" then hes a little to blame. Then again you did admit you didnt do your research so even if he did state the disk type it may not have mattered.

Work has their own disk types. O, A, and T disk. O disk gives more of a concave face and wont fit over any break kit accept a base size. A disk should fit over sport or stock akebonos. T disk fits large brake kits making the faces more convex.

If Im incorrect someone chime in and correct me please

90 ST · 12-22-2014, 03:25 PM

Quote:

Originally Posted by Zerafian

no. Just resell them for the same price. Its actually the faces that are causing them not to fit, not the barrels

Unless youd be ok with running -3 to -4 camber up front. Youd probably need to buy front A arms at that point

Im not pointing fingers but if the seller didnt state they were "O disk" then hes a little to blame. Then again you did admit you didnt do your research so even if he did state the disk type it may not have mattered.

Work has their own disk types. O, A, and T disk. O disk gives more of a concave face and wont fit over any break kit accept a base size. A disk should fit over sport or stock akebonos. T disk fits large brake kits making the faces more convex.

If Im incorrect someone chime in and correct me please

Good point, they would still only fit with spacers, even with different barrels. Sell them and move on.

zefaulter · 12-22-2014, 03:38 PM

Quote:

Originally Posted by nismolucino

These are 2 piece correct? If so couldnt you just get new barrels or faces to change the offset?

Quote:

Originally Posted by 90 ST

If they are a real 2 piece one could, but would it be worth the $$ is the question.

They are welded 2 piece. Meaning you can't just unbolt and replace. I was willing to pay for that but I dont think it's possible.

Quote:

Originally Posted by Zerafian

no. Just resell them for the same price. Its actually the faces that are causing them not to fit, not the barrels

Unless youd be ok with running -3 to -4 camber up front. Youd probably need to buy front A arms at that point

Im not pointing fingers but if the seller didnt state they were "O disk" then hes a little to blame. Then again you did admit you didnt do your research so even if he did state the disk type it may not have mattered.

Work has their own disk types. O, A, and T disk. O disk gives more of a concave face and wont fit over any break kit accept a base size. A disk should fit over sport or stock akebonos. T disk fits large brake kits making the faces more convex.

If Im incorrect someone chime in and correct me please

I didn't ask the question, I just assumed they'll fit

12-22-2014, 12:25 AM	#1 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	How to make these fit I made a foolish mistake of buying a set of wheels without proper research. I assumed the wheels I bought from a fellow member would fit my Z. Front wheels do not fit because of the sports brake. Using a 20mm spacer, I can get the wheels' face to clear the brake but now I have this problem: Currently running -1.6 camber front(stock alignment with mild drop). I was told by a wheel repair shop that they can take up to 5mm off the hub. so I'll need to take another 15mm in. How much of a negative camber do I need to run to make these fit? Anyone dealt with fender pulling/camber thinks this can happen? I have posted the wheels in FS section in case I can't pull this off

12-22-2014, 12:56 AM	#2 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 421	Sell them. There is no making them look good on your Z...what did they come off of? TerribleONE, edconline, Jordo! and 4 others like this.

12-22-2014, 07:08 AM	#4 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	What size and offset those wheels have? zefaulter likes this.

12-22-2014, 07:18 AM	#7 (permalink)
JC-Nismo A True Z Fanatic Join Date: Sep 2014 Location: Atlanta Posts: 1,244 Drives: 2011 Nismo 370z Rep Power: 13	Sorry man, but don't destroy your Z with these. Work wheels are very popular and you'll get your money back soon. Put your stock wheels back on and continue with the sale as you are. cv129 and zefaulter like this.

12-22-2014, 09:15 AM	#9 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Sell them. The problem is not the offset but rather the backspace spec. These where built with a non sport in mind. Sorry to hear about the outcome. More wheels are always for sale on the forum. Mike zefaulter likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

12-22-2014, 06:58 AM	#3 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	Z...

12-22-2014, 12:23 PM	#11 (permalink)
nismolucino Enthusiast Member Join Date: Mar 2013 Location: Rahway,NJ Posts: 297 Drives: 2010 40th 370z Rep Power: 364	These are 2 piece correct? If so couldnt you just get new barrels or faces to change the offset? zefaulter likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to make my z mean?	henryy370z	Nissan 370Z General Discussions	80	10-21-2012 01:11 AM
can you really make it better	three3y3	Nissan 370Z General Discussions	42	08-13-2011 05:15 PM
Would this make you mad?	bflosabre91	The Lounge (Off Topic)	97	05-04-2011 09:50 PM
Will I make it?	sofa_king	Southern California Region	20	10-13-2010 03:31 AM
How can I make my Z like this?	zmyride	Nissan 370Z General Discussions	22	02-06-2010 09:33 PM