Why you should use these tires with NISMO Wheels: 285/35R19 (F), 325/30R19 (R)

Spooler · 09-16-2015, 10:20 PM

Quote:

Originally Posted by Hotrodz

Thanks guys...I want to be part of the official Big Booty Trudy Club!!!

Be ready to take your spacers off and raise the car a little. You may or may not have to. I gotta put my coilovers on one day soon.

VinceThe1 · 10-23-2015, 12:22 AM

Quote:

Originally Posted by Spooler

Be ready to take your spacers off and raise the car a little. You may or may not have to. I gotta put my coilovers on one day soon.

Idk about lowering, but on stock '12 touring sport ride height I have 10mm spacers upfront, 2.5mm spacers in the rear...making my effective front offset +30mm and +20.5mm rear on 285/35R19 / 325/30R19 tires with no rubbing and a prefect flush-to-fender stance.

JenovaI · 10-27-2015, 04:03 PM

Did you guys need more than 35 psi on the tires when running them oversize like this? I got 265 RE-11s on a 9 inch front and at 35 psi it looked half-flat. 40ish looks better.

kenchan · 10-27-2015, 04:09 PM

Quote:

Originally Posted by JenovaI

Did you guys need more than 35 psi on the tires when running them oversize like this? I got 265 RE-11s on a 9 inch front and at 35 psi it looked half-flat. 40ish looks better.

Spooler · 10-29-2015, 01:07 PM

Quote:

Originally Posted by JenovaI

Did you guys need more than 35 psi on the tires when running them oversize like this? I got 265 RE-11s on a 9 inch front and at 35 psi it looked half-flat. 40ish looks better.

Noop, stock pressures.

JaviZ · 10-29-2015, 08:36 PM

Quote:

Originally Posted by Spooler

Noop, stock pressures.

ditto

VinceThe1 · 11-02-2015, 07:17 PM

Quote:

Originally Posted by JenovaI

Did you guys need more than 35 psi on the tires when running them oversize like this? I got 265 RE-11s on a 9 inch front and at 35 psi it looked half-flat. 40ish looks better.

The tires are wider than original so yes they're gonna look more bubbly on the wheels and therefore look more underinflated. But...they're not underinflated. Infact, the tires having a larger surface area would require less psi in them to hold the same amount of weight, so stock pressure or less...but not more and certainly not 40psi.

BOLIO 671 · 12-03-2015, 07:44 AM

Anyone running this set up 285/35R19 (F), 325/30R19 (R) with Swift Springs?

barncobob · 12-03-2015, 08:33 AM

i always stick with the factory sized tires, the engineers have it figured out.

Spooler · 12-03-2015, 12:48 PM

Quote:

Originally Posted by barncobob

i always stick with the factory sized tires, the engineers have it figured out.

Ah, no they don't. My car is basically stock. It is a big difference. It is not always about the engineering. It is about the money (bean counters).

JARblue · 12-03-2015, 01:00 PM

Quote:

Originally Posted by barncobob

i always stick with the factory sized tires, the engineers have it figured out.

Not exactly. It depends on what you want to get out of the car. The engineers have to account for too many variables in their design and execution to maximize the Z's performance. Safety requirements and cost are probably the most severe restrictions.

Zbrah · 12-03-2015, 01:47 PM

Engineers did a superb job on the concentric slave cylinders

Chuck33079 · 12-03-2015, 02:35 PM

Quote:

Originally Posted by Spooler

It is not always about the engineering. It is about the money (bean counters).

This.

EzDz · 12-03-2015, 04:06 PM

Quote:

Originally Posted by BOLIO 671

Anyone running this set up 285/35R19 (F), 325/30R19 (R) with Swift Springs?

If you run stock wheels I dont see why they wouldn't fit without spacers

BOLIO 671 · 12-04-2015, 07:11 AM

Quote:

Originally Posted by Zbrah

Engineers did a superb job on the concentric slave cylinders

As well as the heat soak issues with the VQ

12-03-2015, 07:44 AM	#128 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Anyone running this set up 285/35R19 (F), 325/30R19 (R) with Swift Springs? broZ likes this. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

12-03-2015, 01:47 PM	#132 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	Engineers did a superb job on the concentric slave cylinders BOLIO 671, JARblue and EzDz like this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Set of 4 Dunlop ZII Tires - 245/45R19 x2 & 275/35R19 x2	2ZORNT2Z	Parts for sale (Private Classifieds)	5	09-12-2014 04:10 PM
[FOR SALE] Blizzak LM-60 Performance Winter (Snow) Tires - 275/35R19 & 245/40R19	ne14wood	Parts for sale (Private Classifieds)	15	11-07-2011 10:59 AM
FS: 245/40R19 & 275/35R19 Winter Tires in Vancouver	theART	Canada	0	10-12-2011 03:22 PM
Stock Rays + 265/35R19 (or) 255/40R19 Fronts, 305/30R19 (or) 285/35R19 Rears	kannibul	Wheels & Tires	7	02-10-2010 09:53 AM
Tires P275/35R19	Educ8r	Nissan 370Z General Discussions	15	01-07-2009 07:30 PM

10-27-2015, 04:03 PM	#123 (permalink)
JenovaI Enthusiast Member Join Date: Sep 2015 Location: Costa Mesa, CA Posts: 255 Drives: 11 370z Supercharged Rep Power: 10	Did you guys need more than 35 psi on the tires when running them oversize like this? I got 265 RE-11s on a 9 inch front and at 35 psi it looked half-flat. 40ish looks better.

12-03-2015, 08:33 AM	#129 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 590	i always stick with the factory sized tires, the engineers have it figured out.