Would you change this setup?

synolimit · 08-25-2014, 02:14 PM

Currently...

9.5" +25 front w/ 255/40/18 and -2.5 camber
10.5" +15 rear w/ 285/35/18 and -1.5 camber

I just bought 4 285/35 RS-3's so thinking square wheels also. I put the rears on the front and on the back I put the 20mm spacer that was on the front with the rear wheels.

Future??

10.5" +15 front w/ 285/35/18 and -2.5 camber
10.5" -5 rear w/ 285/35/18 and -1.5 camber

Should I do it?

Before

After

kenchan · 08-25-2014, 02:48 PM

i would just leave it.

synolimit · 08-25-2014, 05:28 PM

Just cause of buying/selling?

kenchan · 08-25-2014, 05:37 PM

no, the before setup looks performance oriented at least, the after setup is so aggressive your tires poke out the arches. are you changing spring/damp setting to compensate the softer wheel rate?

kornflake7 · 08-25-2014, 06:19 PM

10.5+15 up front unless your doing more camber looks dumb and doesnt match the rear

binary0x01 · 08-25-2014, 06:29 PM

Or, if after stays, roll the fenders (joke, (meby?))

synolimit · 08-25-2014, 06:45 PM

Quote:

Originally Posted by kenchan

no, the before setup looks performance oriented at least, the after setup is so aggressive your tires poke out the arches. are you changing spring/damp setting to compensate the softer wheel rate?

softer wheel rate? never heard that term before. the suspension now is 2 ways with 18k/12k true types.

synolimit · 08-25-2014, 06:49 PM

Quote:

Originally Posted by kornflake7

10.5+15 up front unless your doing more camber looks dumb and doesnt match the rear

not following. my pics look matching to me as long as i do the -5 in the rear.

the Z1 track car i believe runs 10.5 +15 all around. so the front should poke then and the rear should be sucked in. not sure how much camber they're running though.

kenchan · 08-25-2014, 06:56 PM

Quote:

Originally Posted by synolimit

softer wheel rate? never heard that term before. the suspension now is 2 ways with 18k/12k true types.

yah, it's the suspension stiffness measured at the wheel. since you're pushing the wheel away from the car, it gives more leverage thus softening your suspension. again, i dont know your application so dont know if thats going to be a big factor or not.

kornflake7 · 08-25-2014, 07:38 PM

it doesnt look right if you wanna keep the same camber specs is what I'm getting at. I'm not a fan of poke like that looks silly (me personally)

gomer_110 · 08-25-2014, 09:48 PM

For reference:

Front's are 18x10 +30 (-2.2* camber)
Rear's are 18x11 +18 (-1.8* camber)
295/40's on all 4 in this picture.

IMHO Syno, get the same Enkei 18x10.5 +15 wheels the Z1 PWC race car is using along with a set of spacers and extended studs for the rear and call it a day. This will also give you plenty of wheel to throw even more rubber on down the road if you want. (315's

)

Shawa · 08-25-2014, 09:53 PM

What kind of canards are those bro? They're sick

synolimit · 08-25-2014, 11:11 PM

Quote:

Originally Posted by kenchan

yah, it's the suspension stiffness measured at the wheel. since you're pushing the wheel away from the car, it gives more leverage thus softening your suspension. again, i dont know your application so dont know if thats going to be a big factor or not.

Makes sense. Well at one of the stiffest I've seen here if I do change it I'm not to worried. Cars getting built for track like mid ohio, VIR etc.

synolimit · 08-25-2014, 11:13 PM

Quote:

Originally Posted by kornflake7

it doesnt look right if you wanna keep the same camber specs is what I'm getting at. I'm not a fan of poke like that looks silly (me personally)

Me either. Need fender flares I guess.

kenchan · 08-26-2014, 11:23 AM

Quote:

Originally Posted by synolimit

Makes sense. Well at one of the stiffest I've seen here if I do change it I'm not to worried. Cars getting built for track like mid ohio, VIR etc.

i see... with a tad softer ride resulting from the aggressive offsets, you might actually gain more traction with the right tires. GL

08-25-2014, 02:14 PM	#1 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Would you change this setup? Currently... 9.5" +25 front w/ 255/40/18 and -2.5 camber 10.5" +15 rear w/ 285/35/18 and -1.5 camber I just bought 4 285/35 RS-3's so thinking square wheels also. I put the rears on the front and on the back I put the 20mm spacer that was on the front with the rear wheels. Future?? 10.5" +15 front w/ 285/35/18 and -2.5 camber 10.5" -5 rear w/ 285/35/18 and -1.5 camber Should I do it? Before After __________________ 13 370z-

08-25-2014, 02:48 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i would just leave it. janglez likes this.

08-25-2014, 05:28 PM	#3 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Just cause of buying/selling? __________________ 13 370z-

08-25-2014, 06:29 PM	#6 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 14	Or, if after stays, roll the fenders (joke, (meby?)) __________________ Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

08-25-2014, 09:48 PM	#11 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	For reference: Front's are 18x10 +30 (-2.2* camber) Rear's are 18x11 +18 (-1.8* camber) 295/40's on all 4 in this picture. IMHO Syno, get the same Enkei 18x10.5 +15 wheels the Z1 PWC race car is using along with a set of spacers and extended studs for the rear and call it a day. This will also give you plenty of wheel to throw even more rubber on down the road if you want. (315's ) synolimit likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

08-25-2014, 05:37 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	no, the before setup looks performance oriented at least, the after setup is so aggressive your tires poke out the arches. are you changing spring/damp setting to compensate the softer wheel rate?

08-25-2014, 06:19 PM	#5 (permalink)
kornflake7 Base Member Join Date: Mar 2014 Location: San Antonio, TX Posts: 233 Drives: 2013 Nismo 370z Rep Power: 11	10.5+15 up front unless your doing more camber looks dumb and doesnt match the rear

08-25-2014, 07:38 PM	#10 (permalink)
kornflake7 Base Member Join Date: Mar 2014 Location: San Antonio, TX Posts: 233 Drives: 2013 Nismo 370z Rep Power: 11	it doesnt look right if you wanna keep the same camber specs is what I'm getting at. I'm not a fan of poke like that looks silly (me personally)

08-25-2014, 09:53 PM	#12 (permalink)
Shawa Base Member Join Date: Apr 2012 Location: New Jersey Posts: 143 Drives: 2012 Fairlady Z MT Rep Power: 14	What kind of canards are those bro? They're sick

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First Oil Change, change to synthetic?	JungleZ	Nissan 370Z General Discussions	29	08-27-2014 05:40 PM
If I get a replacement DL because of an address change, does my DL number change?	DEpointfive0	Texas	4	11-26-2013 05:21 PM
Help: will the following setup fit???	Dre_d85	Wheels & Tires	12	03-02-2013 05:00 PM
What is the best setup for......	kgreen	Audio & Video	20	03-11-2010 05:20 PM
Is this setup OK?	Graybullet	Audio & Video	24	09-08-2009 01:29 PM