Work Gnosis HS203
 

Finally decided on the wheels I want.


I will be staying stock height. I have a 2011 370z touring w/sport package.

It is GM... What finish would look best? Brushed? or Matt Silver? The pic with two wheels is matt silver and the other is Brushed.



How do these sizes and offsets look?

Front - 19 X 9.5 +35

Rear - 19 X 11 +22

Tires - 245/40 and 285/35

Would it be better to go with a rear 10.5 +15?

I want the full reverse lip (NON Step Lip)... Will I have any issues clearing Sport Brakes?

Any other offset recommendations are appreciated

Thank you.

i would do the rear 10.5 ET15 285/35/19 with the front being 9.5 ET35 245/40/19 to match.

11 will still look okay at ET22, i think, but the tire will be stretched more.

Ok, If i go with the 10.5 in rear should i go with a 275/35 tire?

Is the front offset okay in terms of looking good at stock height? or should i raise it?

no definitely go with 285/35/19 on 10.5

front should look fine. my nismo wheel is 9.5 ET40 and looks slightly tucked as i want it.
ET35 will be pretty flush as with 10.5 ET15 on the rear. you dont want to go too aggressive at
stock height.

I see. So with a 5mm spacer on your front nismo wheel, you would still think it looks good?

Yes i agree too aggresive looks odd at stock height... So with 10.5 et15 and 9.5 et35 i should look pretty flush/ clean look.

What do you think about going with a 19x11 et 22 with 295/35 rear? or is that pointless..

Also, what finish do you think will look best? Brushed to Matted silver?

Thanks for you the input Kenchan

Im doing stock heights as well. I just order work vsxx step lips
Front:
19x9.5 +23 (T-Disk)
265x35x19 mpss
Rear:
19x10.5 +19 (A-Disk)
305x30x19 mpss

1 and half more month of waiting... sigh...

I see, I did not want to go that low of an offset for the front, from the research I have done that will poke...

I was going to go with the VS-XX wheels at first BUT I did not want the step lip design. And for the full reverse I would not be able to get the fitment I am looking for without the use of a spacer.... I did not want to use spacers.

Those wheels one of my favorites though, Good choice.. What Finish did you go with?? I see you have the same color as me... Any thoughts on Brushed or Matted Silver for our color?

poop its gonna poke alot? lol I guess I didnt do a good enough research then...
Yeah we have the same color GM KAD. I went with a customer color.
Face: Matte Black
barrel/Lips: Anodized glossy black
Rivets: Gold

It will poke im guessing around 5mm in the front and the rear will be slightly tucked but wont look bad..

Nice choice on the color combo, you should post them up when you get them mounted.

yeah got the whole set up for $3900

Would you go Matted silver or Brushed? for the hs203

Hard choice... Im in to darker shades of color and I like the rims to stand out.
But if you are giving me only those two choices... I would choose brushed.

If I had these rims. I think I would make them Matte bronze Face with Anodized Glossy bronze barrel/lips. darker shades to match with GM KAD. But everyone has different taste.

Those look great! One of my sales guys just bought a Lexus GS with those on there, and they look good... same color as the ones you posted too. Fitment looks a little odd in the rear, but its going on air, so it will look better then.

Do you have a shop you are already getting them from? I am an authorized dealer for Work Wheels.. Just sayin :tup:

https://fbcdn-sphotos-c-a.akamaihd.n...44128536_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.n...f6ffe3eeac301e

I have called a few shops but have not committed to anyone yet. I got a price of 3323 shipped...

Should I give you a call and we can discuss it? Also, do you know if I will have any trouble with the sport brakes not clearing for the Full Reverse lip?

Absolutely give me a call, and we can discuss it!

And i shouldn't have a problem beating that price... At all :tup: