Ok will do. Thanks

so what color did you decided to go with?

I am pretty sure I will go with the Brushed...

WORK Gnosis HS203 is a 2 piece custom wheels.

1. Caliper clearance are based on disk type. Front use R disk, rear use O disk.

2. Wheels can be done in any offset. Based on our experiences

stock - 9.5 +22 range front and 10.5 +18 range rear
spring - 9.5 +18 range front and 11.0 +15 range rear
coil over - 9.5 +15 range front and 11.0 +10 range rear

Tires size matter and also camber spec matter as well.

Swift Spring Drop

WORK HS203 Limited edition Anodized Grey Finish
20x9.5 +15
20x11.0 +10

Owner: David C

http://www.ravspec.com/wp-content/up...1-1024x768.jpg

http://www.ravspec.com/wp-content/up...2-1024x768.jpg

Thanks, that looks and sounds good.

So will this work for stock height and sport brakes :

Full Reverse Lip
19 x 9.5 +35 Front R Disk

19 x 10.5 +15 O disk

I think you can push it out around 19x9.5 +25 range.

Kenchan, Didn't you run a 19 X 10.5 +15 in rear in the past? I remember one of your posts saying that. And a 19 X 9 +38 with 5mm spacer. How did that look? Should I do 9.5 +38 in front? to be closer to your fronts?

I understand that I COULD push it to around +25 but that will not look good at stock height.

My question is, can I do a 9.5 +35 R disk without any issues on Full Reverse Lip? Same thing on the rear 10.5 +15 O disk without any issues on Full Reverse Lip?

Yes you can. Caliper clearance are based on Disk type, so +35mm offset will clear without spacer.

As long as R disk front and O disk rear, caliper will clear.

WORK Gnosis HS203

19x9.5 +35 ~ +30mm 5x114.3
19x10.5 +22 ~ +18mm 5x114.3

Silver Finish -- $2985 For the Set

BRU Finish -- $3185 For the Set

that's my weds setup with the 10.5 ET15 on the rear. 9.5 ET38 will look pretty much like my 9 ET33 setup if that's wat you want.

when i bought the weds i originally ordered the rear 10.5 ET24, but the store sent me
10.5 ET15's by mistake. they were fine to send me ET24 replacements, but since
the 10.5's fit better inwards vs 10 at ET15, i just kept them for variety's sake.

i personally think the stock 19x10 at ET15 looks weird. too narrow and too
flush to rear arch.

honestly the best fit on stock height for base is the nismo's running 285/35/19
on the rear, RE11's.

Thanks Kenchan, I have got a lot of tips from your posts.

I am thinking of going with 19x9.5 +35 and 19x10.5 +18. that would basically look like the nismo wheels (fitment wise) with 5mm spacers all around. What do you think about that set up?

If you added any size of spacers to front and rear on your nismo wheels what would you do?

nismo setup is 9.5 ET40 and 10.5 ET23 so yah, you will be a tad more aggressive. should look good.
just make sure to get good tires, not some pos.

my recommendation = RE11, or at least the S04. they are the best looking tires in this price range and stick very well, great response.

245/40/19 and 285/35/19

the RE11's will make you feel like you're cheating cause of how controlled and predictable at the limit of adhesion.