Suspension and Tire help needed

NORAIN

Pretty sure you're toed out front and back. They should be able to get your numbers the same side to side too. Most racks read positive numbers as toe out. Toe out in the back had my car all over the place. The rear end would kinda snap out when cornering if I hit any change in road surface. Don't let the alignment guy use OEM specs to go by. They tend to center you up in the middle of spec numbers. Which puts you with way too much toe out. I went through this several times before I figured out what was happening. I was going to a regular auto service place for alignment, they don't get it. Find a race shop or someone that can think outside the box...
I'm running .0 toe in front and a touch toe in, in the back, -1/32 ea side. If you do some reading here you'll see most lowered cars run similar toe numbers.
Good luck

__________________
Swift Springs|265-305 RE-11|Forgestar F14|F.I. TDX S.S. 12" Res."Milled Out"|K&N|SPL|Z1(34 row)oil cooler|Z1 brake upgrade|Hotchkis Zspeed|Team Voodoo|HPDEjunkie.com