Vossen CV3's - Will It Fit?
 

20x9.0 +32 w/ Hankook V12 245/35/20
20x10.5 +15 w/Hankook V12 275/30/20 (with 20mm Spacer)

Thats the setup I have in mind at the moment, I'm hoping to order these wheels and tires before I get my Z in early June so I can put them on as soon as possible :)

Any help is appreciated.

or should I go with +25 in the rear with a 10mm spacer?

if your car is stock height you wont need spacers with your first approach.

+25 on a 10.5 will look cleaner than the +15 at stock height. if you want your rear to look more flush, then +15 is better.

So with my setup in the first post, without the spacer, tires will be flush and no rubbing? How much room you think there would be for lowering?

front tires will have a clean stance, no poke, not sunken in. ET32 is perfect for 9".

if you lower you may want to add another 5-7mm on the front (ET25 to ET28). ET15 on the rear will look clean regardless if 10.5" width.

i personally dont like poke especially on stock ride height.

Well thank you very much for the help :)

np, GL with your project!

Those were my ideal specs as well except for the offset measurments and no spacer. I was planning to go +20, +25 respectively. Post some pics of your set up once you fiinish man! I am curious to see.