19x9.5 +5 up front anyone?

forza370z · 02-25-2014, 11:33 AM

Anyone runs 19x9.5 +5 up front? And issue? Pictures are welcome! Thanks!

kenchan · 02-25-2014, 11:42 AM

you joking right?

ask wisely...

forza370z · 02-25-2014, 12:31 PM

Quote:

Originally Posted by kenchan

you joking right?

ask wisely...

SPCLaw370z · 02-25-2014, 01:01 PM

I'm running 19x10.5 -5 up front. You'll be fine.

AdamRacer · 02-26-2014, 09:35 PM

Quote:

Originally Posted by SPCLaw370z

I'm running 19x10.5 -5 up front. You'll be fine.

Wow look at that camber though up front lol.

forza370z · 02-26-2014, 10:08 PM

I've made my mind. I will go with 19x9.5 +17 up front coz I might run them on stock height for a while. +5 will poke out too much. I will just add spacers when I lower my car.

Thanks for the inputs!

synolimit · 02-26-2014, 10:15 PM

I'm +25 and poke 1/4". I hate it!

karotZ · 02-26-2014, 10:17 PM

I had 19x9.5+18 on my SSR MS3. It might look good on stock height, just a heads up though, once you go lower, you will have to shave your bumper mounts and camber in a little bit, and also roll the fender. I did all three plus a fender pull - I'm sitting on H&R springs. I can text you pics or post one later. The offset can make the tires look like balloons when not setup correctly.

forza370z · 02-27-2014, 12:39 AM

Quote:

Originally Posted by karotZ

I had 19x9.5+18 on my SSR MS3. It might look good on stock height, just a heads up though, once you go lower, you will have to shave your bumper mounts and camber in a little bit, and also roll the fender. I did all three plus a fender pull - I'm sitting on H&R springs. I can text you pics or post one later. The offset can make the tires look like balloons when not setup correctly.

Hmm... Interesting. So how much camber you ran? And what tire size you had? What is shaving bumper mounts? I thought the front fenders are factory rolled you only can pull them. I didn't know you have to do that. 19x9.5 +18 is like stock wheels adding 20mm spacers. I didn't know it's gonna be that aggressive. I don't mind to run some negative cambers as long as it's not -3.0+ or something.

forza370z · 02-27-2014, 12:44 AM

Quote:

Originally Posted by karotZ

I had 19x9.5+18 on my SSR MS3. It might look good on stock height, just a heads up though, once you go lower, you will have to shave your bumper mounts and camber in a little bit, and also roll the fender. I did all three plus a fender pull - I'm sitting on H&R springs. I can text you pics or post one later. The offset can make the tires look like balloons when not setup correctly.

Like this guy is running 19x9.5 +17 and lowered pretty much like those H&R springs can do. It doesn't look aggressive tho. The guy told me he has no issues.

DEpointfive0 · 02-27-2014, 01:23 AM

Quote:

Originally Posted by SPCLaw370z

I'm running 19x10.5 -5 up front. You'll be fine.

Because you run dumb áss camber

karotZ · 02-27-2014, 02:09 AM

Quote:

Originally Posted by forza370z

Like this guy is running 19x9.5 +17 and lowered pretty much like those H&R springs can do. It doesn't look aggressive tho. The guy told me he has no issues.

I can already see he went with more camber. I had negative 2 on mine with stock arms. The pic you had he prolly had an adjustable arm and went more than neg 2. More than neg 2 is rich for my blood, lol I cant buy tires every few months!

P.S. I noticed he has stretched tires too, it will lower the chance of rubbing but this is a performance car, it needs some tire beef!

karotZ · 02-27-2014, 02:14 AM

Quote:

Originally Posted by forza370z

Hmm... Interesting. So how much camber you ran? And what tire size you had? What is shaving bumper mounts? I thought the front fenders are factory rolled you only can pull them. I didn't know you have to do that. 19x9.5 +18 is like stock wheels adding 20mm spacers. I didn't know it's gonna be that aggressive. I don't mind to run some negative cambers as long as it's not -3.0+ or something.

The front left and right has areas where your bumper screws on. This will require shaving if you have a tire size of 265/35/19 or higher since it will cut and rub your tires just like it did on mine, hence folks will tell you to keep front offset up to +22 since it's perfectly just flush without rubbing issues. The rear fenders are rolled from factory, but not the front. What I'm trying to say is if you plan to lower your car in the long run, might as well get the right wheels instead of buying multiple sets unless you have deep pockets lol.

synolimit · 02-27-2014, 09:00 AM

Quote:

Originally Posted by forza370z

Hmm... Interesting. So how much camber you ran? And what tire size you had? What is shaving bumper mounts? I thought the front fenders are factory rolled you only can pull them. I didn't know you have to do that. 19x9.5 +18 is like stock wheels adding 20mm spacers. I didn't know it's gonna be that aggressive. I don't mind to run some negative cambers as long as it's not -3.0+ or something.

Check your math. That's like adding a 35mm spacer to stock wheel.

forza370z · 02-27-2014, 09:01 AM

Quote:

Originally Posted by karotZ

The front left and right has areas where your bumper screws on. This will require shaving if you have a tire size of 265/35/19 or higher since it will cut and rub your tires just like it did on mine, hence folks will tell you to keep front offset up to +22 since it's perfectly just flush without rubbing issues. The rear fenders are rolled from factory, but not the front. What I'm trying to say is if you plan to lower your car in the long run, might as well get the right wheels instead of buying multiple sets unless you have deep pockets lol.

Gotcha! My z is not my DD. It's my weekend car. I usually bring it to car show or car event. So I don't really mind running some negative camber as long as it's not stupid. I am planning to run the stock 245x19x35 up front. I guess I will survive. Thanks for the heads up bro!

02-25-2014, 11:33 AM	#1 (permalink)
forza370z A True Z Fanatic Join Date: Oct 2011 Location: 403 Forbidden Posts: 2,512 Drives: 2009 NISMO 370Z Rep Power: 19	19x9.5 +5 up front anyone? Anyone runs 19x9.5 +5 up front? And issue? Pictures are welcome! Thanks! __________________ 09 PW 370z Nismo \| K&N Drop Ins \| HKS Hi Power \| Berk HFCs \| Work Meister S1 3P \| Project Kics R40 Neo Chrome Lug Nuts \| KW V1 \| SPC rear camber arms/toe bolts \| Southbend Stage 3 daily clutch \| Southband 19Ib Steel Flywheel \| ZSpeed CSC

02-25-2014, 01:01 PM	#4 (permalink)
SPCLaw370z Base Member Join Date: Oct 2012 Location: Lancaster PA Posts: 53 Drives: 09 370z Rep Power: 13	I'm running 19x10.5 -5 up front. You'll be fine. OMGWTFBBQ and Liquid_G like this. __________________ Slammed 2009 Z34 on custom Work Wheels. Negetive offsets and huge step lips. To each his own.

02-26-2014, 10:08 PM	#6 (permalink)
forza370z A True Z Fanatic Join Date: Oct 2011 Location: 403 Forbidden Posts: 2,512 Drives: 2009 NISMO 370Z Rep Power: 19	I've made my mind. I will go with 19x9.5 +17 up front coz I might run them on stock height for a while. +5 will poke out too much. I will just add spacers when I lower my car. Thanks for the inputs! __________________ 09 PW 370z Nismo \| K&N Drop Ins \| HKS Hi Power \| Berk HFCs \| Work Meister S1 3P \| Project Kics R40 Neo Chrome Lug Nuts \| KW V1 \| SPC rear camber arms/toe bolts \| Southbend Stage 3 daily clutch \| Southband 19Ib Steel Flywheel \| ZSpeed CSC

02-26-2014, 10:15 PM	#7 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	I'm +25 and poke 1/4". I hate it! DEpointfive0 likes this. __________________ 13 370z-

02-26-2014, 10:17 PM	#8 (permalink)
karotZ Track Member Join Date: Dec 2010 Location: not found Posts: 723 Drives: on empty tank of gas Rep Power: 15	I had 19x9.5+18 on my SSR MS3. It might look good on stock height, just a heads up though, once you go lower, you will have to shave your bumper mounts and camber in a little bit, and also roll the fender. I did all three plus a fender pull - I'm sitting on H&R springs. I can text you pics or post one later. The offset can make the tires look like balloons when not setup correctly. forza370z likes this. __________________ VERTEX \| SUIVAX \| AMUSE \| SSR \| SPARCO \| STILLEN \| FAST INTENTIONS x HKS \| HANKOOK \| NARDI \| NRG \| EVO-R \| ROBISPEC \| SPC

02-25-2014, 11:42 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	you joking right? ask wisely...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
275/35/19 on 19x9.5 +24 (no spacer) Front?	YoungZ	Wheels & Tires	4	12-20-2019 02:07 PM
19x9.5 +22 too much for the front?	gaveup	Wheels & Tires	44	07-19-2016 07:24 AM
19x9.5 +5??	Viera	Wheels & Tires	22	04-22-2012 05:12 PM
(1) 19X9.5 front NISMO Rays + (2) 19X10.5 NISMO Rays w/Yokohoma ADVAN Sport	Nismo-Z	Parts for sale (Private Classifieds)	18	07-21-2011 06:02 PM
WTB: 1 Front Rays Sport 19x9 rim	awdonly	Wanted	0	07-24-2010 12:16 PM