Stock Sport Package Rays Rear Wheels on Front?

IGoFast1589 · 12-04-2013, 10:58 AM

A buddy of mine is selling 2 rear stock sport package Rays wheels. The 19x10 +30 wheels. Will these fit without issue on the front of the car? I have the sport package which includes the larger brakes and want to makes sure those offsets are good to clear the front brakes and not rub with the fender lining/fender lip on the outside. Thinking about doing a square setup front and rear using the factory rear Rays wheels on all four corners of the car.

Anyone have pictures if they've done this? It would be great to see how they fit visually.

zeeder · 12-04-2013, 02:54 PM

According to an offset calculator you would have 4mm more inner clearance and it would extend 30mm further out. I imagine that it depends on if you're dropped or not but you will likely need some negative camber to not poke.

IGoFast1589 · 12-04-2013, 03:19 PM

Quote:

Originally Posted by zeeder

According to an offset calculator you would have 4mm more inner clearance and it would extend 30mm further out. I imagine that it depends on if you're dropped or not but you will likely need some negative camber to not poke.

Hmm yeah... So it would sit roughly 1 1/4" out further due to the increased wheel width and offset. You may be right it may need some camber, but it may be all set as is also. Gotta take some measurements unless someone else has already tried it?

DEpointfive0 · 12-04-2013, 03:32 PM

Quote:

Originally Posted by IGoFast1589

Hmm yeah... So it would sit roughly 1 1/4" out further due to the increased wheel width and offset. You may be right it may need some camber, but it may be all set as is also. Gotta take some measurements unless someone else has already tried it?

Yeah, people DO run 4 rears,
I know someone running 4 rear Nismos! Lol

I don't know how much camber people are running, although I imagine it's a lot

zeeder · 12-04-2013, 03:34 PM

Quote:

Originally Posted by IGoFast1589

Hmm yeah... So it would sit roughly 1 1/4" out further due to the increased wheel width and offset. You may be right it may need some camber, but it may be all set as is also. Gotta take some measurements unless someone else has already tried it?

I know there's some folks running 25mm spacers for the sport fronts in the spacer threads but I don't think I've seen anyone with 30's and most of the 25's have been lowered to some degree. I just purchased 20mm spacers all around and I'm slightly worried that the front will be a bit more aggressive than I would like but I didn't want to mess with replacing studs...lol.

DEpointfive0 · 12-04-2013, 03:38 PM

Quote:

Originally Posted by zeeder

I know there's some folks running 25mm spacers for the sport fronts in the spacer threads but I don't think I've seen anyone with 30's and most of the 25's have been lowered to some degree. I just purchased 20mm spacers all around and I'm slightly worried that the front will be a bit more aggressive than I would like but I didn't want to mess with replacing studs...lol.

I like 20mm on every corner. Although like 22mm would be PERFECT on the rear with 20mm on the front

XPNSD IT · 12-04-2013, 03:56 PM

I think you should just switch the wheels real quick and test it out! Should take you no longer than 30min

IMO that would look kind of funny though, Hot Wheel status. But if it works and is what you want WGAF.

zeeder · 12-04-2013, 04:04 PM

Quote:

Originally Posted by DEpointfive0

I like 20mm on every corner. Although like 22mm would be PERFECT on the rear with 20mm on the front

I had seen pictures of 22mm and they looked pretty good but I took advantage of Z1's sale this weekend! Perhaps I'll find time this weekend to put the spacers and emblems on my car!

IGoFast1589 · 12-04-2013, 04:08 PM

Quote:

Originally Posted by XPNSD IT

I think you should just switch the wheels real quick and test it out! Should take you no longer than 30min

IMO that would look kind of funny though, Hot Wheel status. But if it works and is what you want WGAF.

I think I will do just that.

Quote:

Originally Posted by zeeder

I know there's some folks running 25mm spacers for the sport fronts in the spacer threads but I don't think I've seen anyone with 30's and most of the 25's have been lowered to some degree. I just purchased 20mm spacers all around and I'm slightly worried that the front will be a bit more aggressive than I would like but I didn't want to mess with replacing studs...lol.

Stud replacement isn't too hard.

XPNSD IT · 12-04-2013, 04:12 PM

Quote:

Originally Posted by IGoFast1589

I think I will do just that.

Post a pic if you do! I wouldn't mind seeing how it fits and what it looks like.

gurneyeagle · 12-04-2013, 05:24 PM

Quote:

Originally Posted by XPNSD IT

Post a pic if you do! I wouldn't mind seeing how it fits and what it looks like.

Remember to remove the bolt that's in the front hub that doesn't allow the rear tire to go on the front hub. It simply screws out.

blackcherry20 · 12-04-2013, 05:56 PM

Quote:

Originally Posted by XPNSD IT

Post a pic if you do! I wouldn't mind seeing how it fits and what it looks like.

me too. Interested in seeing how it looks.

IGoFast1589 · 12-05-2013, 02:35 PM

I'll probably give it a shot in a week or two. When I do it I will post a picture.

KaienZ34 · 12-05-2013, 02:50 PM

Quote:

Originally Posted by DEpointfive0

Yeah, people DO run 4 rears,
I know someone running 4 rear Nismos! Lol

I don't know how much camber people are running, although I imagine it's a lot

please sir...

roplusbee · 12-30-2013, 12:13 AM

Quote:

Originally Posted by KaienZ34

please sir...

I would like to see that as well

12-04-2013, 10:58 AM	#1 (permalink)
IGoFast1589 Base Member Join Date: Oct 2012 Location: Florida Posts: 72 Drives: 2009 370Z Rep Power: 13	Stock Sport Package Rays Rear Wheels on Front? A buddy of mine is selling 2 rear stock sport package Rays wheels. The 19x10 +30 wheels. Will these fit without issue on the front of the car? I have the sport package which includes the larger brakes and want to makes sure those offsets are good to clear the front brakes and not rub with the fender lining/fender lip on the outside. Thinking about doing a square setup front and rear using the factory rear Rays wheels on all four corners of the car. Anyone have pictures if they've done this? It would be great to see how they fit visually.

12-04-2013, 02:54 PM	#2 (permalink)
zeeder Enthusiast Member Join Date: Jun 2011 Location: Columbia, MO Age: 47 Posts: 460 Drives: ‘13 370Z ST 6M Rep Power: 3428	According to an offset calculator you would have 4mm more inner clearance and it would extend 30mm further out. I imagine that it depends on if you're dropped or not but you will likely need some negative camber to not poke. __________________ Zack FI catback, HFC, and Start Button - Z1 Intake - Nismo S-Tune Spoiler - PasswordJDM V2 Shift Knob

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] OEM 19" Stock Sport Rays (1) front, (1) rear	prochobo	Parts for sale (Private Classifieds)	3	06-25-2011 12:33 PM
WTB: Stock 19" Sport package Rays	endless86	Parts for sale (Private Classifieds)	5	06-04-2010 03:01 PM
WTS 1 19" Front Sport Package Rays Wheel $150	USMCASA	Parts for sale (Private Classifieds)	0	05-26-2010 07:36 PM
WTB: Stock 19" Sport package Rays	MblueZ34	Parts for sale (Private Classifieds)	0	04-25-2010 12:42 AM

12-04-2013, 03:56 PM	#7 (permalink)
XPNSD IT Enthusiast Member Join Date: Oct 2011 Location: San Jose, CA Posts: 298 Drives: 09 370z/16 Hyper STI Rep Power: 14	I think you should just switch the wheels real quick and test it out! Should take you no longer than 30min IMO that would look kind of funny though, Hot Wheel status. But if it works and is what you want WGAF.

12-05-2013, 02:35 PM	#13 (permalink)
IGoFast1589 Base Member Join Date: Oct 2012 Location: Florida Posts: 72 Drives: 2009 370Z Rep Power: 13	I'll probably give it a shot in a week or two. When I do it I will post a picture.