Lug Nuts - The definitive guide

JARblue · 12-03-2013, 09:52 PM

Quote:

Originally Posted by wstar

Really? I generally go 80 for the initial install and then re-torque at 85 after an initial test drive. After that I check them at 85 pretty regularly (esp during a track weekend), but it's rare any of them move at 85 again. Sometimes 1-2 move a little before clicking on the 2nd re-torque, but never more than that. This is cone-type aftermarkets on aftermarket wheels, though, maybe that makes a difference.

I torque the stock lugs on stock rims to 85 every time and have pretty much the same experience as you seem to have with the aftermarket ones (albeit minus the track time stress). I should check them more often, but I don't take the wheels off too often and they are always fine. As it is, I've only had a couple of lugs between all four wheels ever need tightening on the 2nd re-torque - after that they are always fine.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EcoJet: Definitive Edition - Jay Leno's Garage	Nismo89	Other Vehicles	0	10-31-2012 10:32 PM
The Definitive Z34 Brake Resource	SE	Brakes & Suspension	68	05-11-2012 02:19 PM
A guide for your next office encounter	Anatoray	The Lounge (Off Topic)	0	03-15-2011 04:35 PM
Nissan Chemical Guide PDF	kdo2milger	Nissan 370Z Owners Manual / Service Manuals	8	07-20-2009 02:04 PM