nismo wheels trade for varrestoen es1 ..good deal?

malteir · 11-26-2013, 06:59 PM

Quote:

Originally Posted by DEpointfive0

I'll take any color TE37s for Nismos

haha alright im going to do it ...his wheels are coming off a g35 ..anything i should look for ?

DEpointfive0 · 11-26-2013, 07:01 PM

Quote:

Originally Posted by malteir

haha alright im going to do it ...his wheels are coming off a g35 ..anything i should look for ?

Figure out the offsets, see if they're fake!

There are TONS of fake TE37s and some look pretty damn good... Find a wheel guru in your area. And/or PM Waizzzz

kenchan · 11-26-2013, 08:50 PM

If you're not lowered those won't look right as G35C uses different offsets especially the front.

RavSpec · 11-27-2013, 12:54 AM

If not mistaken, nismo wheels are made by RAYS. Should be forged, around 18lbs.

TE37, same technology, material, new around $850 per wheel.

DEpointfive0 · 11-27-2013, 01:15 AM

Quote:

Originally Posted by RavSpec

If not mistaken, nismo wheels are made by RAYS. Should be forged, around 18lbs.

TE37, same technology, material, new around $850 per wheel.

Yes and no, they weigh more than TE37s, I'd like to say 23lbs for the rear

OMGWTFBBQ · 11-27-2013, 01:18 AM

Check the offsets on the TE37! Make sure they're around +22 in the front and either +22 or +12 in the rear!

Since they're teal, the original stickers might be gone from inside the barrel unless they were removed before refinishing and put back on afterwards.

Just do the usual checks to make sure they're not TE37 knockoffs.

malteir · 11-27-2013, 03:42 AM

Quote:

Originally Posted by OMGWTFBBQ

Check the offsets on the TE37! Make sure they're around +22 in the front and either +22 or +12 in the rear!

Since they're teal, the original stickers might be gone from inside the barrel unless they were removed before refinishing and put back on afterwards.

Just do the usual checks to make sure they're not TE37 knockoffs.

Quote:

Originally Posted by DEpointfive0

Yes and no, they weigh more than TE37s, I'd like to say 23lbs for the rear

Quote:

Originally Posted by kenchan

If you're not lowered those won't look right as G35C uses different offsets especially the front.

The offsets are 22+ front and rear

speedfreek · 11-27-2013, 09:33 AM

Quote:

Originally Posted by kenchan

you can? where?

never heard of such thing.

Quote:

Originally Posted by DEpointfive0

FB Nissan is your friend. $1989 shipped

DEpointfive0 is on it. Our forum vendors got us covered. I almost got those instead of Forgestars but didn't want to continue running spacers.

Volk Z · 11-27-2013, 11:38 PM

Quote:

Originally Posted by malteir

The offsets are 22+ front and rear

Just to let you know to verify these are real since the teal is not a color Rays offers so they were painted/powdercoated after and the Rays stickers won't be on the inner barrel.

To verify for a 19 fortunately all TE37s in 19s will have embossed words etc in between each spoke. JWL, Rays, Forged etc... If they are varstoens or Rotas they won't have these written on them (maybe jwl but not forged or Rays).

Also the rear +22 will be weak if you are lowered, go with a 20mm spacer to bring it to a +2 and it will look nice. The fronts will look great.

I've had 3 sets of TE37s so any questions you have I can certainly answer for you

DEpointfive0 · 11-28-2013, 12:26 AM

Quote:

Originally Posted by Volk Z

Just to let you know to verify these are real since the teal is not a color Rays offers so they were painted/powdercoated after and the Rays stickers won't be on the inner barrel.

To verify for a 19 fortunately all TE37s in 19s will have embossed words etc in between each spoke. JWL, Rays, Forged etc... If they are varstoens or Rotas they won't have these written on them (maybe jwl but not forged or Rays).

Also the rear +22 will be weak if you are lowered, go with a 20mm spacer to bring it to a +2 and it will look nice. The fronts will look great.

I've had 3 sets of TE37s so any questions you have I can certainly answer for you

Can one acquire those stickers on the barrel? I have some CE28N TTA's or something with too many letters and the red stripe looks RETARDED on my blue car, so I'm going to powdercoat them... And the stickers are kinda gone anyways, lol

Volk Z · 11-28-2013, 09:50 AM

Quote:

Originally Posted by DEpointfive0

Can one acquire those stickers on the barrel? I have some CE28N TTA's or something with too many letters and the red stripe looks RETARDED on my blue car, so I'm going to powdercoat them... And the stickers are kinda gone anyways, lol

Unfortunately Rays is so strict with their stickers they only give out with new purchases. The rays/volk spoke stickers can usually be purchased on ebay (some are fake) but the inner barrel sticker with offset/width specs are stamped on at the factory and that's it.

Just to make a suggestion for you why not have someone or yourself get a vinyl strip in blue or whatever color and go over the red? There is a motorcycle shop online that sells the kits for 19 inch wheels for like 20 bucks.. Not sure if you know who Nitrouz is on here but he did it on his 350z and 370z and it looked sick! They have literally 100s of colors to choose from in every shade etc.

DEpointfive0 · 11-28-2013, 10:37 AM

Quote:

Originally Posted by Volk Z

Unfortunately Rays is so strict with their stickers they only give out with new purchases. The rays/volk spoke stickers can usually be purchased on ebay (some are fake) but the inner barrel sticker with offset/width specs are stamped on at the factory and that's it.

Just to make a suggestion for you why not have someone or yourself get a vinyl strip in blue or whatever color and go over the red? There is a motorcycle shop online that sells the kits for 19 inch wheels for like 20 bucks.. Not sure if you know who Nitrouz is on here but he did it on his 350z and 370z and it looked sick! They have literally 100s of colors to choose from in every shade etc.

Welllllllll, a bit of curb rash, and I really just want to refinish the wheels. Loooonf story but I scuffed them up a bit while putting the lugs on too... I know... I know... I'm a horrible person...

Other question I had, any idea how much the value of the wheels drops without the stickers? Orrrrrr... If I went to engrave one of the spokes with "Rays" or whatever it is that comes on the new JDM only version that one of the sponsors is bringing to the US, would that lower the value?

RavSpec · 12-06-2013, 12:58 PM

Quote:

Originally Posted by DEpointfive0

Welllllllll, a bit of curb rash, and I really just want to refinish the wheels. Loooonf story but I scuffed them up a bit while putting the lugs on too... I know... I know... I'm a horrible person...

Other question I had, any idea how much the value of the wheels drops without the stickers? Orrrrrr... If I went to engrave one of the spokes with "Rays" or whatever it is that comes on the new JDM only version that one of the sponsors is bringing to the US, would that lower the value?

Stop by your local RAYS dealer ship, show them the actual wheel.

They will be able to order them for you with sufficient proof.

I just got some CE28N sticker in stock in NY, I just need proof it's real CE28n in order to sell them to you.

Need to ship them to a customer for replacement.

Mark.
RavSpec

Volk Z · 12-06-2013, 02:09 PM

Quote:

Originally Posted by RavSpec

Stop by your local RAYS dealer ship, show them the actual wheel.

They will be able to order them for you with sufficient proof.

I just got some CE28N sticker in stock in NY, I just need proof it's real CE28n in order to sell them to you.

Need to ship them to a customer for replacement.

Mark.
RavSpec

Ravspec to the rescue, this is a cool thing both the fact you want valid proof and that you give the opportunity to get replacement stickers

I have seen rota wheels with Volk/rays stickers on them

Waiz · 12-06-2013, 07:05 PM

Came in here with my torch to join the mob but seems like the situation was diffused

Friends don't let friends run Varrstoens

11-27-2013, 12:54 AM	#19 (permalink)
RavSpec A True Z Fanatic Join Date: Jan 2011 Location: NY Posts: 2,532 Drives: 370Z Rep Power: 19	If not mistaken, nismo wheels are made by RAYS. Should be forged, around 18lbs. TE37, same technology, material, new around $850 per wheel. __________________ RavSpec - Your Custom JDM Wheel Source. W: www.RavSpec.com . E: sales@ravspec.com . T: 631-586-3520 WORK Wheels, RAYS, ADVAN, WEDS, Super Star Financing Option: www.ravspec.com/finance

12-06-2013, 07:05 PM	#30 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	Came in here with my torch to join the mob but seems like the situation was diffused Friends don't let friends run Varrstoens DEpointfive0 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2013 (Gunmetal) Nismo Wheels TRADE For 2012 (Silver) Nismo Wheels???	brandon3434	Nismo 370Z	20	06-03-2013 12:40 PM
[WTB] Trade my 19" stock rays for nismo wheels or aftermarket wheels + cash	Amelio1217	Parts for sale (Private Classifieds)	0	05-26-2013 11:17 PM
2013 (Gunmetal) Nismo Wheels TRADE For 2012 (Silver) Nismo Wheels???	brandon3434	Wheels & Tires	0	05-09-2013 12:37 AM
2010 white Nismo with 7k miles $32k? Good deal	vexeclipse200	Nissan 370Z Pricing / Ordering Discussions	5	03-29-2013 06:02 PM
oil cooler trade off,is this a good deal??	havasuwiley	Nissan 370Z General Discussions	17	08-21-2009 12:53 AM

11-26-2013, 08:50 PM	#18 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	If you're not lowered those won't look right as G35C uses different offsets especially the front.

11-27-2013, 01:18 AM	#21 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Check the offsets on the TE37! Make sure they're around +22 in the front and either +22 or +12 in the rear! Since they're teal, the original stickers might be gone from inside the barrel unless they were removed before refinishing and put back on afterwards. Just do the usual checks to make sure they're not TE37 knockoffs.