wheels and tire all 4 same size for track????

BGTV8 · 11-07-2013, 07:50 PM

I have Enkei PF01 +35 offset with a 25mm spacer at the rear and a 12.7mm space at the front and 2.5 neg camber at front/1.7 neg camber at rear and it is
a) flush
b) brilliant from mechanical grip perspective.

Current tyres are 265/35R18 A048 Yoki's (got a special deal on cost) and 275/35R18 NT01R on the rear. Will go Yoki all round when rears are shot

yoyoPR · 11-07-2013, 08:28 PM

Quote:

Originally Posted by BGTV8

I have Enkei PF01 +35 offset with a 25mm spacer at the rear and a 12.7mm space at the front and 2.5 neg camber at front/1.7 neg camber at rear and it is
a) flush
b) brilliant from mechanical grip perspective.

Current tyres are 265/35R18 A048 Yoki's (got a special deal on cost) and 275/35R18 NT01R on the rear. Will go Yoki all round when rears are shot

i like your numbers !! all flush.... you are in 10.5 or 9.5?

BGTV8 · 11-07-2013, 08:58 PM

Quote:

Originally Posted by yoyoPR

i like your numbers !! all flush.... you are in 10.5 or 9.5?

9.5 inch

yoyoPR · 11-07-2013, 08:48 PM

the problem is i dont want buy the wheels and then the front wheels dont fit, or fit but are to far away from the fenders. I want same numbers all around for track use only.
please feel free to put your same all around
18wheels numbers and offset for all 4 corners!!

BGTV8 · 11-08-2013, 02:49 AM

All reasons why I went 9.5 rather than bigger and also why I only run 265 wide tyres - for a NA Z34, it is "enough".

One poster in the thread runs a TT setup and compains of slip (I'm assuming wheelspin and induced oversteer), so my guess is that when the TT comes on boost, even a 305 will struggle to hold grip, but that is another story .... IMHO there is such a thing as simply too much torque - especially in a road-car, but I'll put my flame-proof underwear on 'cos lots of people might want to disagree.

RB

Isamu · 11-08-2013, 10:23 AM

FortuneLSX-TT ftw!

Read T · 11-09-2013, 11:45 AM

With spacers the NT03 will fit. I have a set in the same sizes you are interested in if you want a used pair.

I ended up not wanting to run spacers and sprang for forgestar F14s square setup

11-08-2013, 02:49 AM	#5 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,515 Drives: 09 Nissan 370Z M6 Rep Power: 39974	All reasons why I went 9.5 rather than bigger and also why I only run 265 wide tyres - for a NA Z34, it is "enough". One poster in the thread runs a TT setup and compains of slip (I'm assuming wheelspin and induced oversteer), so my guess is that when the TT comes on boost, even a 305 will struggle to hold grip, but that is another story .... IMHO there is such a thing as simply too much torque - especially in a road-car, but I'll put my flame-proof underwear on 'cos lots of people might want to disagree. RB yoyoPR and OldManGorman like this.

11-09-2013, 11:45 AM	#7 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 18	With spacers the NT03 will fit. I have a set in the same sizes you are interested in if you want a used pair. I ended up not wanting to run spacers and sprang for forgestar F14s square setup yoyoPR likes this. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tire size for Work wheels?	Zonster	Wheels & Tires	3	08-29-2013 10:27 AM
Tire size for my wheels...	onefastz	Wheels & Tires	16	05-20-2011 02:32 PM
Please confirm the spare tire size for standard 18" wheels	Lee123	Wheels & Tires	0	08-08-2010 09:17 PM
Tire size for Enkei stock 18" wheels	Cmike2780	Wheels & Tires	18	07-19-2010 12:33 PM
Tire Size help...	zcoupe09	Wheels & Tires	5	10-06-2009 04:31 PM

11-07-2013, 07:50 PM	#1 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,515 Drives: 09 Nissan 370Z M6 Rep Power: 39974	I have Enkei PF01 +35 offset with a 25mm spacer at the rear and a 12.7mm space at the front and 2.5 neg camber at front/1.7 neg camber at rear and it is a) flush b) brilliant from mechanical grip perspective. Current tyres are 265/35R18 A048 Yoki's (got a special deal on cost) and 275/35R18 NT01R on the rear. Will go Yoki all round when rears are shot

11-07-2013, 08:48 PM	#4 (permalink)
yoyoPR Base Member Join Date: Jun 2012 Location: Puerto Rico Posts: 37 Drives: 12 370znismo#0202 GM Rep Power: 13	the problem is i dont want buy the wheels and then the front wheels dont fit, or fit but are to far away from the fenders. I want same numbers all around for track use only. please feel free to put your same all around 18wheels numbers and offset for all 4 corners!!