TPMS bomb DIY. So easy even a child can do it!

SurfDog · 10-09-2013, 09:38 PM

1. Obtain child
ImageUploadedByTapatalk 21381368873.877390.jpg
2. Obtain 4 inch PVC end cap, threaded end cap, PVC glue, Teflon tape, and a threaded plumbing inflation (Schroeder Valve)
ImageUploadedByTapatalk 21381368904.654841.jpg
3. Glue end cap to threaded end cap.

4 drill hole just a bit smaller than plumbing inflation valve.
ImageUploadedByTapatalk 21381368950.237814.jpg
5. Screw in valve
ImageUploadedByTapatalk 21381368973.585785.jpg
6. (Not pictured because Shadezz has all my TPMS sensors). Insert TPMS sensors (padded with bubble wrap or paper towels)
7. Make threads airtight with Teflon tape
ImageUploadedByTapatalk 21381369021.132648.jpg

SurfDog · 10-09-2013, 09:43 PM

8. Screw on endcap
ImageUploadedByTapatalk 21381369308.710934.jpg

9. Inflate to about 40 psi
ImageUploadedByTapatalk 21381369340.803794.jpg

10. Clean and put away tools and child.
ImageUploadedByTapatalk 21381369378.150497.jpg

GOOD LUCK! HAVE FUN!!

kenchan · 10-09-2013, 10:12 PM

awesome DIY!

GJ to your kid.

hahaha

cooltoy · 10-09-2013, 10:58 PM

We have that blue whale tap protector too.

agoodcar · 10-09-2013, 11:23 PM

this is one happy kid!

Rusty · 10-10-2013, 10:25 AM

I've done this with my truck sensors. Problem I have is after about week and a half. I have to put more air into it as it leaks out through the plastic pipe it self. Ended up using metal pipe. Food for thought.

SurfDog · 10-10-2013, 10:33 AM

Quote:

Originally Posted by Rusty

I've done this with my truck sensors. Problem I have is after about week and a half. I have to put more air into it as it leaks out through the plastic pipe it self. Ended up using metal pipe. Food for thought.

Thanks! I did not think of that!

I am going to plastidip inside of the PVC to "Seal" it!

SouthArk370Z · 10-10-2013, 11:33 AM

Quote:

Originally Posted by Rusty

I've done this with my truck sensors. Problem I have is after about week and a half. I have to put more air into it as it leaks out through the plastic pipe it self. Ended up using metal pipe. Food for thought.

PVC is not very gas permeable. I suspect you had a leaky Schrader valve, threads, joints, &c.

osbornsm · 10-10-2013, 01:40 PM

Quote:

Originally Posted by SouthArk370Z

PVC is not very gas permeable. I suspect you had a leaky Schrader valve, threads, joints, &c.

Jeez, making pipe bombs for TPMS? Seems a bit overkill (pun intended)

Rusty · 10-10-2013, 05:06 PM

Quote:

Originally Posted by SouthArk370Z

PVC is not very gas permeable. I suspect you had a leaky Schrader valve, threads, joints, &c.

That depends on the plastic used. At work, I've seen PVC hold hydrogen gas with no problems, then seen it leak through the wall of the PVC using plant air. Go figure.

SouthArk370Z · 10-10-2013, 05:41 PM

Quote:

Originally Posted by Rusty

That depends on the plastic used. At work, I've seen PVC hold hydrogen gas with no problems, then seen it leak through the wall of the PVC using plant air. Go figure.

One is likely to run into only two grades of PVC pipe at the local hardware store: building grade and piping grade. As far as gas permeability goes, there's not much difference between the two. Both are pretty much airtight when put together properly. If it will hold Hydrogen (I have my doubts but will take your word for it), it will hold anything you or I are likely to put in it.

FWIW, I would consider PVC pipe to be a very poor choice of materials to use in a car. It becomes brittle when cold and soft when warm (max working temperature is only 140F for building grade PVC). If one must use PVC, the method that uses two large caps looks like it would be the strongest.

Cbtech · 10-10-2013, 06:13 PM

ummm....ill ask. wtf is this for?????

fuct · 10-10-2013, 06:14 PM

Quote:

Originally Posted by Cbtech

ummm....ill ask. wtf is this for?????

glad someone else is confused. haha

i guess you put them in the car to fool the car to think you have the sensors in.... no?

i guess putting a happy face sticker over the TPMS warning light is too much work.

Cbtech · 10-10-2013, 06:20 PM

Quote:

Originally Posted by fuct

glad someone else is confused. haha

i guess you put them in the car to fool the car to think you have the sensors in.... no?

i guess putting a happy face sticker over the TPMS warning light is too much work.

aaahhh that makes sense!!

por que??

paperboy42190 · 10-10-2013, 06:35 PM

i was a bit confused at first but I guess it makes sense. you would need 4 of these to get rid of the dash light right?

why not just use the valve stem thats on the tpms as the fitting though? just like how it would work on a wheel.

10-09-2013, 09:43 PM	#2 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 56 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15749	8. Screw on endcap ImageUploadedByTapatalk 21381369308.710934.jpg 9. Inflate to about 40 psi ImageUploadedByTapatalk 21381369340.803794.jpg 10. Clean and put away tools and child. ImageUploadedByTapatalk 21381369378.150497.jpg GOOD LUCK! HAVE FUN!! gurneyeagle likes this. __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

10-10-2013, 10:25 AM	#6 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I've done this with my truck sensors. Problem I have is after about week and a half. I have to put more air into it as it leaks out through the plastic pipe it self. Ended up using metal pipe. Food for thought. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-10-2013, 06:13 PM	#12 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 15	ummm....ill ask. wtf is this for????? __________________ Are U in Sacramento or Central Valley California? Click here! Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off

10-10-2013, 06:35 PM	#15 (permalink)
paperboy42190 Base Member Join Date: Sep 2011 Location: Alhambra, CA Posts: 193 Drives: 2007 Acura TL Type-S Rep Power: 14	i was a bit confused at first but I guess it makes sense. you would need 4 of these to get rid of the dash light right? why not just use the valve stem thats on the tpms as the fitting though? just like how it would work on a wheel. Cbtech likes this. Last edited by paperboy42190; 10-10-2013 at 06:40 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z with child car seat	lyno_j777	Nissan 370Z General Discussions	78	01-23-2023 05:51 PM
TPMS Bomb. Does it work for us?	SurfDog	Wheels & Tires	19	10-22-2013 02:11 AM
Would you pimp your child to sell a car?	ZeeingAround	The Lounge (Off Topic)	13	12-04-2012 12:25 PM
Car bomb found in Manhattan	blue660r01	The Lounge (Off Topic)	18	05-03-2010 02:21 AM
my child...in magnetic black	ejrives	Member's 370Z Gallery	14	05-24-2009 01:53 PM

10-09-2013, 10:12 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	awesome DIY! GJ to your kid. hahaha

10-09-2013, 10:58 PM	#4 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	We have that blue whale tap protector too.

10-09-2013, 11:23 PM	#5 (permalink)
agoodcar Base Member Join Date: Aug 2013 Location: chicago, IL Posts: 13 Drives: 370z touring Rep Power: 12	this is one happy kid!