spacers

DeLRo · 07-13-2010, 04:50 PM

Quote:

Originally Posted by ZForce

Kewl, glad it all worked out. I lub my 20 mm fr and 25mm Rr (H&R) Pass the word to ur bay area buds about my spacers 4sale. In 4 ur pics once the stance and wheels r done.

I was just thinking about picking up a set of H&R's. Can you PM me price. Also are these new or used?

ZForce · 07-13-2010, 05:43 PM

Quote:

Originally Posted by DeLRo

I was just thinking about picking up a set of H&R's. Can you PM me price. Also are these new or used?

New and pm sent.

kgreen · 07-08-2010, 11:32 AM

im running H&R springs, H&R spacers 20mm rear and 15mm front with no rubbing issues. Rear is perfectly flush with fender and fronts tuck slightly. Exactly what i wanted

the_student · 07-13-2010, 12:25 AM

Found out the fender does rub with 20mm up front. I am dropped 1.4 in front and rear on KW V3. Got an alignment back to stock and it definitely rubs but only on banked turns while hitting some bumps like on on/off ramps. Going straight is no problem. I am still looking to go 1/4 to 3/8s lower. If you go 20mm spacer up front, drop your car about 1.5 inches, and drive agressively, you should definitely have your front fenders rolled.

Zforce, I think you are on Eiback Prokits? That may be why you aren't experiencing any rubbing issues?

batman_4 · 07-13-2010, 04:00 PM

Quote:

Originally Posted by the_student

Found out the fender does rub with 20mm up front. I am dropped 1.4 in front and rear on KW V3. Got an alignment back to stock and it definitely rubs but only on banked turns while hitting some bumps like on on/off ramps. Going straight is no problem. I am still looking to go 1/4 to 3/8s lower. If you go 20mm spacer up front, drop your car about 1.5 inches, and drive agressively, you should definitely have your front fenders rolled.

i have 20mm front as well and dropped on Stance coils, went down about 2.5in and have no rubbing issues. weird stuff

the_student · 07-13-2010, 08:19 PM

Quote:

Originally Posted by batman_4

i have 20mm front as well and dropped on Stance coils, went down about 2.5in and have no rubbing issues. weird stuff

I checked my fender earlier this morning. Looks like I am not rubbing the fender but the little bump of the fender lining where the bumper meets the fender. It seems as if my tire scraped some of the lining off already. I'll take a picture tomorrow to show what I'm talking about. I wonder if I ccan just cut that piece off...hmm

Also my coilover are out of the box settings. I may have to play with the damping or rebound. Not sure how to approach that yet.

ZForce · 07-13-2010, 02:51 PM

Yup... I have the ProKit (0.9 drop)...as I do not think the Sportline (1.2 drop) was available last Aug when I purchased mine. I would have still stuck with the ProKit becuase there was no need to buy $$$ front control arms. Any lower and I would prolly not be able to kick out the wheels any more than 15mm in the front.

20mm in Fr and 25mm in the rear is a perfect match with Eibach ProKit and SPC rear camber kit. Also the Toe bolt will def have to be installed to get it back into an acceptable range or OEM spec. But NO upper control arm needed....yipee!!!

Roll the front fender? They are already rolled. ....Errr....correction, I just checked and they are NOT rolled from factory....bastards...the Z33 were rolled from factory...what up??

ZForce · 07-13-2010, 04:12 PM

yeh, some weird stuff.

kenchan · 07-13-2010, 04:14 PM

anyone have picts of 20mm up-front at stock height? i have wheelset with a 27mm offset 19x9 for front and wonder how it would look.

ZForce · 07-13-2010, 05:45 PM

Quote:

Originally Posted by kenchan

anyone have picts of 20mm up-front at stock height? i have wheelset with a 27mm offset 19x9 for front and wonder how it would look.

Sry mine was dropped and kicked out at the same time and in that order.

kenchan · 07-14-2010, 01:57 PM

Quote:

Originally Posted by ZForce

Sry mine was dropped and kicked out at the same time and in that order.

np! i dont have tires wrapped on my wheels yet so dont know if i can use them or not... im worried it will have a 4x4 look...

if anyone has picts of 20mm fronts with stock height pls post them up.

Modshack · 07-15-2010, 08:13 AM

Quote:

Originally Posted by kenchan

if anyone has picts of 20mm fronts with stock height pls post them up.

Here's 15mm's on stock springs if that helps..

kenchan · 07-15-2010, 09:41 AM

thanks, modshack! doesnt look lifted at all.

chuckd05 · 07-20-2010, 09:30 PM

20mm H&R stud replacement ( easy install ) up front, 25mm v2 Ichiba in rear... dropped on eibachs

neveucd · 08-06-2010, 11:51 PM

Anyone have the problem of installing 20mm spacers with the bolts built on, in the rear, and the stock studs extend past the spacer...causing the wheel not to sit flat against the spacer. How do I fix this if my wheel doesn't have a space for it. It makes me quite nervous that it will fall off. Should I shave down the stock studs or dremel into the rim? Please help.

07-20-2010, 09:30 PM	#14 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 20	20mm H&R stud replacement ( easy install ) up front, 25mm v2 Ichiba in rear... dropped on eibachs __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

08-06-2010, 11:51 PM	#15 (permalink)
neveucd Enthusiast Member Join Date: Oct 2009 Location: Houston, TX. Age: 41 Posts: 457 Drives: 2009 Nissan 370z TT Rep Power: 16	Anyone have the problem of installing 20mm spacers with the bolts built on, in the rear, and the stock studs extend past the spacer...causing the wheel not to sit flat against the spacer. How do I fix this if my wheel doesn't have a space for it. It makes me quite nervous that it will fall off. Should I shave down the stock studs or dremel into the rim? Please help. __________________ GTM Stg. 2 TT\|\|F.I. CF 18" Res. CBE\|\|GTM 3" Downpipe \|\|Injen Cold Water Intakes\|\|UpRev\|\|Work Gnosis GS2\|\|Hankook\|\|Tein Monoflex\|\|Hawk\|\|Seibon\|\|Aero Jacket\|\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spacers	tbss370z	Brakes & Suspension	20	03-17-2014 05:58 AM
Speaker Spacers	Mike@ZE	ZEnclosures	22	01-28-2012 07:03 PM
Spacers	tbss370z	Wheels & Tires	21	08-08-2009 09:14 AM
Eibach spacers	FricFrac	Brakes & Suspension	0	06-14-2009 06:18 AM
Spacers on stock Z?	ArtVandaleigh	Wheels & Tires	67	04-13-2009 10:44 AM

07-08-2010, 11:32 AM	#3 (permalink)
kgreen Enthusiast Member Join Date: Feb 2009 Location: EL Paso, Tx Posts: 387 Drives: SR 370z Rep Power: 244	im running H&R springs, H&R spacers 20mm rear and 15mm front with no rubbing issues. Rear is perfectly flush with fender and fronts tuck slightly. Exactly what i wanted

07-13-2010, 12:25 AM	#4 (permalink)
the_student Track Member Join Date: Jun 2009 Location: bay area Posts: 522 Drives: '13 LE 4runner Rep Power: 17	Found out the fender does rub with 20mm up front. I am dropped 1.4 in front and rear on KW V3. Got an alignment back to stock and it definitely rubs but only on banked turns while hitting some bumps like on on/off ramps. Going straight is no problem. I am still looking to go 1/4 to 3/8s lower. If you go 20mm spacer up front, drop your car about 1.5 inches, and drive agressively, you should definitely have your front fenders rolled. Zforce, I think you are on Eiback Prokits? That may be why you aren't experiencing any rubbing issues?

07-13-2010, 02:51 PM	#7 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Yup... I have the ProKit (0.9 drop)...as I do not think the Sportline (1.2 drop) was available last Aug when I purchased mine. I would have still stuck with the ProKit becuase there was no need to buy $$$ front control arms. Any lower and I would prolly not be able to kick out the wheels any more than 15mm in the front. 20mm in Fr and 25mm in the rear is a perfect match with Eibach ProKit and SPC rear camber kit. Also the Toe bolt will def have to be installed to get it back into an acceptable range or OEM spec. But NO upper control arm needed....yipee!!! Roll the front fender? They are already rolled. ....Errr....correction, I just checked and they are NOT rolled from factory....bastards...the Z33 were rolled from factory...what up??

07-13-2010, 04:12 PM	#8 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	yeh, some weird stuff.

07-13-2010, 04:14 PM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	anyone have picts of 20mm up-front at stock height? i have wheelset with a 27mm offset 19x9 for front and wonder how it would look.

07-15-2010, 09:41 AM	#13 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	thanks, modshack! doesnt look lifted at all.