spacers

Mike

I am sticking with the rear 25mm ichibas, as they aren't causing my vibrations, but switching to the H&Rs up front. They are 15mm. I don't have the stock sport wheels though, I have the Nismo S-tune wheels, but they are the same specs.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

ZForce

Good to hear that 25mm in the rear and 15 mm in the front works with no rubbing.

So the consensus is:



Lowered car
25 mm rear (only available as a bolt-on) Part # 5065662 DRM Series
DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included). Wheel is bolted to new DRM wheel studs.


15 mm front (only available as a stud replacement) Part # 3065662 DRS Series
DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (studs are included).


H&R is the one to go with. H&R TRAK+® Wheel Spacers | Products || H&R Special Springs, LP

Note: the above bolt-on / stud replacement types are for H&R spacers only


Good prices from these vendors:
(look under 350Z they are the same bolt pattern as the 370Z)

Nissan Wheel Spacers Fits 240sx, 300zx, 350z, 350z Roadster, Maxima, Murano (H&R: 5065662)
Nissan Wheel Spacers Fits 240sx, 300zx, 350z, 350z Roadster, Maxima, Murano (H&R: 3065662)


MyNismo.com - H&R Trak+ Wheel Spacers


H&R Spacer 240SX S14/300ZX/350Z/Maxima 25mm
H&R Spacer 240SX S14/300ZX/350Z/Maxima 15mm



Thanks keng714, Mike & antennahead ....good info