spacers

antennahead · 11-11-2009, 11:38 PM

Quote:

Originally Posted by ZForce

H&R very good over the others, you pay more but the quality is there and the hub centric ring integrated. Top notch, I had them (20mm fr & rr) on my 350Z with stock rims and went with replacing the studs.

What size did you go with in the rear and the part#?

And has anyone done the fronts yet with success (larger than 10mm)?

Any pics?

15mm in the rear, part # 3065662

ZForce · 11-12-2009, 01:36 AM

^ Cool, thanks John. I am going to try 20 mm fr and rr. Hopefully the fronts can take em. Will probably go with the stud replacement version. Wonder if any one has tried 25mm in the rear?

keng714 · 11-12-2009, 10:06 AM

here 20mm ichiba spacers front and rear, also im lowered on hks coilovers.

Mike · 11-12-2009, 10:21 AM

My H&Rs just arrived. Its a nice day here, so I will probably install them shortly.

Bster · 11-12-2009, 11:53 AM

Quote:

Originally Posted by keng714

here 20mm ichiba spacers front and rear, also im lowered on hks coilovers.

Peeeerfect.

keng714 · 11-12-2009, 12:03 PM

Quote:

Originally Posted by Bster

Peeeerfect.

not so much i wish i had at least another 10mm in the back and front. The front does rub the fender liner.

Bster · 11-12-2009, 12:12 PM

Quote:

Originally Posted by keng714

not so much i wish i had at least another 10mm in the back and front. The front does rub the fender liner.

I think it's perfect because I like it flushed and tucked. You could put some negative camber up front.

Like they say, "If it ain't rubbin', it ain't low enough"

Mike · 11-12-2009, 12:21 PM

Ichiba is on the left, H&R on the right. I'm pretty sure the H&R will solve the vibration issues, as it definitely extends the hubcentric ring farther into the wheel.

ZForce · 11-12-2009, 12:30 PM

Quote:

Originally Posted by Mike

My H&Rs just arrived. Its a nice day here, so I will probably install them shortly.

kewl...what size(s) did you go with and are you installing them on stock sport wheels and the drop?

ZForce · 11-12-2009, 12:34 PM

Quote:

Originally Posted by keng714

not so much i wish i had at least another 10mm in the back and front. The front does rub the fender liner.

Interesting...guess that leaves the 20mm OUT for me, if it rubs. Then again suppose it depends on the drop. I will be running Eibachs .9 drop. Wonder if the 20mm will not rub with that drop, since it's on the conservative side.

Did you guys go with stud replacment version or the bolt on spacer?

ZForce · 11-12-2009, 12:38 PM

keng714, OT...but nice black out on the grill and rear difuser. That is the first thing I did back in March when I picked up mine. Looks like it's catching on all over.

ZForce · 11-12-2009, 12:46 PM

Quote:

Originally Posted by Mike

Ichiba is on the left, H&R on the right. I'm pretty sure the H&R will solve the vibration issues, as it definitely extends the hubcentric ring farther into the wheel.

I have always liked H&R product.

Thanks guys for keeping this thread alive. I hope to pull the trigger on some spacers soon.

Mike · 11-12-2009, 01:53 PM

Quote:

Originally Posted by ZForce

kewl...what size(s) did you go with and are you installing them on stock sport wheels and the drop?

I am sticking with the rear 25mm ichibas, as they aren't causing my vibrations, but switching to the H&Rs up front. They are 15mm. I don't have the stock sport wheels though, I have the Nismo S-tune wheels, but they are the same specs.

keng714 · 11-12-2009, 03:00 PM

Quote:

Originally Posted by Bster

I think it's perfect because I like it flushed and tucked. You could put some negative camber up front.

Like they say, "If it ain't rubbin', it ain't low enough"

well its not flush enough or low enough yet lol....... here was my car before the z

keng714 · 11-12-2009, 03:01 PM

Quote:

Originally Posted by ZForce

Interesting...guess that leaves the 20mm OUT for me, if it rubs. Then again suppose it depends on the drop. I will be running Eibachs .9 drop. Wonder if the 20mm will not rub with that drop, since it's on the conservative side.

Did you guys go with stud replacment version or the bolt on spacer?

i went with the stud replacement, i had the version 2 on my lexus but never really trusted them.

11-12-2009, 10:06 AM	#33 (permalink)
keng714 Base Member Join Date: May 2009 Location: dallas Posts: 186 Drives: Lexus Is250 Rep Power: 16	here 20mm ichiba spacers front and rear, also im lowered on hks coilovers. Last edited by keng714; 12-08-2009 at 01:28 AM.

11-12-2009, 10:21 AM	#34 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	My H&Rs just arrived. Its a nice day here, so I will probably install them shortly. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spacers	tbss370z	Brakes & Suspension	20	03-17-2014 06:58 AM
Speaker Spacers	Mike@ZE	ZEnclosures	22	01-28-2012 08:03 PM
Spacers	tbss370z	Wheels & Tires	21	08-08-2009 10:14 AM
Eibach spacers	FricFrac	Brakes & Suspension	0	06-14-2009 07:18 AM
Spacers on stock Z?	ArtVandaleigh	Wheels & Tires	67	04-13-2009 11:44 AM

11-12-2009, 01:36 AM	#32 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	^ Cool, thanks John. I am going to try 20 mm fr and rr. Hopefully the fronts can take em. Will probably go with the stud replacement version. Wonder if any one has tried 25mm in the rear?

11-12-2009, 12:38 PM	#41 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	keng714, OT...but nice black out on the grill and rear difuser. That is the first thing I did back in March when I picked up mine. Looks like it's catching on all over.