I checked my fender earlier this morning. Looks like I am not rubbing the fender but the little bump of the fender lining where the bumper meets the fender. It seems as if my tire scraped some of the lining off already. I'll take a picture tomorrow to show what I'm talking about. I wonder if I ccan just cut that piece off...hmm


Also my coilover are out of the box settings. I may have to play with the damping or rebound. Not sure how to approach that yet.

np! i dont have tires wrapped on my wheels yet so dont know if i can use them or not... im worried it will have a 4x4 look...:icon14:

if anyone has picts of 20mm fronts with stock height pls post them up. :tup:

Here's 15mm's on stock springs if that helps..

http://images50.fotki.com/v1525/phot...MG_1911-vi.jpg

http://images50.fotki.com/v1557/phot...MG_2006-vi.jpg

thanks, modshack! doesnt look lifted at all. :p

20mm H&R stud replacement ( easy install ) up front, 25mm v2 Ichiba in rear... dropped on eibachs

http://www.the370z.com/members/chuck...ar-spacers.jpg

Anyone have the problem of installing 20mm spacers with the bolts built on, in the rear, and the stock studs extend past the spacer...causing the wheel not to sit flat against the spacer. How do I fix this if my wheel doesn't have a space for it. It makes me quite nervous that it will fall off. Should I shave down the stock studs or dremel into the rim? Please help.

Nah man you can't put on those type on the rear. The built-in bolt style spacer has to be a minimum of 25mm. Anything smaller and you have to do bolt replacement.

So just take those off man and replace them with the right type.

exactly. If you really want that type on the rear, you will have to replace the studs with shorter ones.

As long as you use the Version 2 (Bolt on style) you'll be fine on the rear. The recesses are deep enough on the wheel to accommodate the protruding studs. You cannot use this type on the front though

http://images47.fotki.com/v1476/phot...MG_1548-vi.jpg

http://images44.fotki.com/v1487/phot...MG_1461-vi.jpg

Not using stock rims, so the back doesn't look like that. And there was no place for them to sit. I took them off, waste of money blah. So on 25mm the stock studs don't extend past the spacer at all? The rims were pulled off my old g35 and weren't wide enough in the back.

how about on the nismo rear's 285/35 will 25mm work?

i have built in studs in the rear , and had 20 , with no issues.. had 20mm built in stud in the front too, but it introduced some vibration

You wanna put 25mm spacers on the rear of your Nismo? Whhoaooo!! I don't think thats gonna work man. But I wanna see you try and post pics ;) :drama:

I've seen 15mm and it looked great.

Saw a couple of old link from last year LOL, but where's a good place to get H&R 15mm DRS series spacers..??
Any Vendors here worth talking too.?

I may have to run 15mm front and rear on a Nismo, shouldn't be an issue if I plan on lowering on Tein springs right..??

^I have one set of 15mm (new) H&R part #3065662 that I would be willing to let go. pm me if interested.