Picture request pleae: Vossen wheels on stock suspension.

cooltoy

Hello good people.

I am looking for pictures of any 20" Vossen wheels (+20 in the front and +15 in the back) on a stock suspension and no spacers.

From the back and the front shots would be best.

Please and thank you.

kenchan

those will look weird at et20 on the front at stock height. guaranteed.

Xplicit97

Pretty sure I have some of my old CV3 on my old black 370.. lemme look

Sent from my SPH-L710 using Tapatalk 2

__________________
[B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

cooltoy

I'd appreciate that.

cooltoy

I am thinking the same, but I 'd like to see.

I went down to the dealership at lunch to day to so some quick measurements and from what I got, there is about 15-20 mm between the face of the rim and the inside of the fender. If that is correct, then the +20 will stick out past the wheel well slightly. I am not sure about how that would look.

kenchan

it will look odd. some might say otherwise, but at ET20 at stock height it's going to emphasize gap significantly.

9" width keep it around ET32. 9.5" around ET38-40.

stock nismo wheels are 9.5" ET40. they fit my Z perfectly.

cooltoy

I think I am getting to see it your way for the front (sorry Chad).

I am concerned about the rear (Rohana wheels) the lowest offset they have is +28 for 11". I might need to run a 5 mm spacer, but I am not sure if spacers are good idea.

kenchan

the nismo 10.5" are ET23 in the rear and imo fitment is also perfect for stock height. 285/35/19 tires.

with 11" it should fit pretty nicely with ET28.

rohana's use the aftermarket tapered lugs right? then it's lug centric so you can use a generic spacer. i'd get a 3mm spacer if needed to push out just a hair, but probably not needed. ebay has a vendor out in michigan that makes very good precision spacers.

you'll want to use steel lugs (muteki makes colored steel ones) and make sure you have at least 10mm of thread. that's usually the rule of thumb. if you dont have 10mm, then you'll need longer studs.

kenchan

btw, i have picts in my albums page with the nismo wheels. i dont use spacers on those wheels. should give you a nice reference how your car will look with similar offsets.

nismos are 19x9.5 ET40, 19x10.5 ET23.
my weds are 19x9 ET33, 19x10.5 ET15. i wanted the ET24 rears but the store sent me ET15 by mistake.
it's an aggressive fit but looked okay so i just kept the ET15's.

GetYourWheels

The +20 offset on stock suspension does poke a tad.

Once lowered it sits perfect.

__________________

cooltoy

Thanks guys. Not sure about the lugs, but advice noted.

I think I made up my mind. I might loose some concavity, but I am going to go slightly conservative. Don't want to poke.

GetYourWheels

Sounds great! Let us know if there is anything else we can help you with.

__________________