Just received my Concept One CSL5.5 Wheels

rvbsanjose · 08-10-2013, 12:41 AM

Quick snapshot. Going on the Nismo this weekend. Unfortunately, still waiting for my swift springs to arrive however.

Ideas for which tire sizes I should get?

19x9 + 15 front
19x10.5 + 20 rear

cooltoy · 08-10-2013, 12:43 AM

I guess that would depend on the rim specs.

DEpointfive0 · 08-10-2013, 12:52 AM

Quote:

Originally Posted by cooltoy

I guess that would depend on the rim specs.

rvbsanjose · 08-10-2013, 01:01 AM

Added wheel specs.

Zbrah · 08-10-2013, 01:46 AM

Check out Tayloryan370's journal, he has the same wheels, I think he runs 255&295

rvbsanjose · 08-10-2013, 08:07 PM

How do I find his journal? I would really like to get in contact with this person as I have some questions about the fit.

Quote:

Originally Posted by Zbrah

Check out Tayloryan370's journal, he has the same wheels, I think he runs 255&295

The front's do not seem to fit the car. Since the car has less then 500 miles on it, I decided to use the stock tires that came with the car. So to clear things up, I'm running the following specs:

19x9 + 15 => 245/40/19
19x10.5 + 20 => 285/35/19

These wheels were purchased from GetYourWheels.com and Eric was very specific that I wouldn't have a problem with the fitment, but as you can see in the photos, I do have problems. The rears are perfect, in fact they could use like a 10mm spacer on the rear to even kick them out more.

Can someone with these wheels or similar specs chime in? Are you running aggressive camber, etc? How did you get these to fit properly?

Zbrah · 08-10-2013, 09:38 PM

You can find it in Member's 370z Gallery, page 3.

rvbsanjose · 08-10-2013, 10:21 PM

Thanks Zbrah

Quote:

Originally Posted by Zbrah

You can find it in Member's 370z Gallery, page 3.

FairladyZ10PG · 08-10-2013, 11:03 PM

I think the front will be fine once you drop your car due to negative camber. But I do think you will need a spacer in the rear to have them sit more flush.

rvbsanjose · 08-11-2013, 10:55 PM

Install is scheduled for Thursday so I hope so as well.

Quote:

Originally Posted by FairladyZ10PG

I think the front will be fine once you drop your car due to negative camber. But I do think you will need a spacer in the rear to have them sit more flush.

kenchan · 08-12-2013, 04:11 PM

Quote:

Originally Posted by rvbsanjose

Can someone with these wheels or similar specs chime in? Are you running aggressive camber, etc? How did you get these to fit properly?

too late now, but those are 350Z/G35C offsets. you need to run considerable negative camber to make that fit and slam it.

cooltoy · 08-12-2013, 05:10 PM

That's why I did all the research (pestering kenchan) before the purchase.

rvbsanjose · 08-12-2013, 05:13 PM

Kenchan, what is considered considerable? I am installing my Swift Spec-R springs this Saturday.

I was told lowering the car will help along with running negative camber but maybe someone could elaborate as to why lowering would help.

Quote:

Originally Posted by kenchan

too late now, but those are 350Z/G35C offsets. you need to run considerable negative camber to make that fit and slam it.

rvbsanjose · 08-12-2013, 05:17 PM

I was told by Get Your Wheels that these would fit with no issues. I did however mention I was already lowered on Swifts.

Eric was very quick to reply to my emails so I am really hoping I will be OK once I lower and run some negative camber. Stilling waiting on a reply from TaylorRyan370Z which will help me as well.

Quote:

Originally Posted by cooltoy

That's why I did all the research (pestering kenchan) before the purchase.

kenchan · 08-12-2013, 05:47 PM

if i was going to run swifts, i would probably run 19x9 ET25-30 range or 19x9.5 ET30-35range, and rear 19x10.5 ET10 - ET16 range.

08-10-2013, 12:43 AM	#2 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,973 Drives: 14 PW 370Z S/T MT Rep Power: 243722	I guess that would depend on the rim specs. DEpointfive0 likes this.

08-10-2013, 11:03 PM	#9 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 255	I think the front will be fine once you drop your car due to negative camber. But I do think you will need a spacer in the rear to have them sit more flush. __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

08-12-2013, 05:10 PM	#12 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,973 Drives: 14 PW 370Z S/T MT Rep Power: 243722	That's why I did all the research (pestering kenchan) before the purchase. blackcherry20 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Concept One Wheels offered at B2autodesigns	b2autodesigns	Tires/Wheels	390	06-17-2019 07:45 AM
Concept One CSL5.5 19x9 19x10.5 Step Lip	GetYourWheels	Tires/Wheels	42	04-16-2015 06:52 PM
19x9.0 / 19x10.5 Concept One CSL5.5 Matte Black with Gloss Black lip	speed depot	Tires/Wheels	7	11-12-2012 11:09 AM
19" Concept One RS8 staggered wheels - starting @ 1236.00 shipped	speed depot	Tires/Wheels	2	05-26-2012 02:14 AM
New concept for painting wheels	zuperman 370	Exterior & Interior	6	04-13-2012 05:01 PM

08-10-2013, 01:01 AM	#4 (permalink)
rvbsanjose Base Member Join Date: Jun 2013 Location: Newark, CA Posts: 86 Drives: 15 Nismo 370Z M6 Rep Power: 12	Added wheel specs.

08-10-2013, 01:46 AM	#5 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	Check out Tayloryan370's journal, he has the same wheels, I think he runs 255&295

08-10-2013, 09:38 PM	#7 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	You can find it in Member's 370z Gallery, page 3.

08-12-2013, 05:47 PM	#15 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	if i was going to run swifts, i would probably run 19x9 ET25-30 range or 19x9.5 ET30-35range, and rear 19x10.5 ET10 - ET16 range.