Work HS203s have arrived
 

Gotta give props to Mark at Ravspec for an easy, simple, "quick" delivery of my new Work HS203 20x9.5+15f and 20x11+16r. From payment to delivery was about 8 weeks. Just need to wrap them in my favorite Michelin super sport tires and get them on the car. Since I still do not have my car I will more than likely drive the wheels to GTM and have them fitted and suspension and ride height adjusted. This will most likely be after car goes to paint. In the mean time they will have to sit tight in there bedroom :rolleyes:

Nice, what offset did you end up getting?

Post edited to show correct offset of +15f and +16r. :tiphat:

I’m liking the color (Silver/Polish). What colors the car going to be?

Thanks. The iPhone pics don't do them justice. They are brushed finish and going on my platinum graphite Z with fujimura front bumper which should be hitting the states within the next two weeks hopefully.

Make sure to post :pics: when you get them on!!!:tup:

Looking good, like the classic look, do you what's the lip size in mm?

Sounds like you got going on the Z, can't wait to see it!

Sorry I have yet to dig them back out. Wife made me put them away lol if I get a chance sometime I will put the specs up for lip width not sure if this helps but it's about 4.5" in rear

Lol u would think so after a year. I can't wait to see it too! :icon18:

Terrible wheel choice.... lol

Looks pretty sweet on a lowered Nismo :rolleyes:

http://www.workwheelsusa.com/media/g...9/914_full.jpg
http://www.workwheelsusa.com/media/g...9/913_full.jpg

Looks cool! Are they forged ?

..........I think he was being sarcastic.

Looks good man....:tup:

Yyyyyeaaaaaaaahhhhh dawg, hundeds on that bitch

no, cast.. 2pc welded.

Ya, that's what I thought at first.. look like he has the same wheels from his signature lol

of course he's being sarcastic...Gene's car is one of the cleanest 370's out there repp'n them!!!!!!

Lmao I know right. I just saw this. It's funny, cuz when I picked these out my buddy sent me info sheets n picks of your car :bowrofl: so that helped solidify my choice.

I did run into a problem this weekend with the wheels. I took them to GTM to mount them up and noticed that the holes were not drilled for the tpms. Not sure who dropped the ball wether it was mark at ravspec or work but I was pretty bummed I was not able to get them on the car. It's now on the lift at GTM without shoes on. I'm reaching out to mark at ravspec in the morning to find out how we are to resolve this issue. Will post back with the solution we come up with.

Lots and lots of high end wheels do not fit TPMS, don't be too bummed

I understand that but these wheels should not be the case. You can order them From work to have the holes drilled out for the tpms sensors. 2nd I doubled checked with mark at ravspec and he told me they would work with the tpms sensors. I believed him cuz he seems to be very familiar with our Zs and well it's what he does for a living. I will post on my response and would love it if liquid could comment to if his where drilled out to accommodate the sensors I may just send him a pm to see. Thanks for the reply

I am not running tpms sensors currently. I just try to keep a closer eye on tire pressure. I hardly notice the light anymore.

My old GS4's though had a second hole drilled out on the inside of the barrel to fit the tpms from the previous owner. Its do-able if you drill it out but not something i cared enough about when buying this set new.

I did want to post that after speaking with mark at ravspec he is going to send out an adaptor kit which will allow me to use the tpms sensor in the wheels without drilling the addition hole. He is even going to send it to GTM for me so they can put shoes back on my car. I can say the customers service has been good. :tup:

They are pretty good dudes over there. Glad they were able to help.

Got the adaptor piece on Friday. Call me tmr I'll send it out !

hey, call me or PM me the detail for GTM. I think I have it but just want to verify.

The adaptor are here. Thanks !