19x10.5 +22 19x11 +18

Jbwrecked · 06-22-2013, 12:49 PM

So made the mistake of trading my Volks for my Work CR Kai in the above mentioned offsets. I had the stock 245/40/19 fr and 275/35/19 rr Potenza Re050 tires and the rear stretches and holds air but the fronts stretch too much and won't hold air unfortunately. Love my new wheels but just gotta get the expropriate tires.

Basically I wanna ask for suggestions as to what size tires I'm able to throw up in the front. I'm still stock height but I plan on dropping about an inch or so in the future. Thanks guys. I'll upload some pics later when I get a chance.

Unique_Z · 06-22-2013, 02:16 PM

If you're into meaty tires, then go 265/35 or 275/35 fronts and 295/30 or 205/30 rears

Jbwrecked · 06-22-2013, 05:27 PM

Will 265 or 275 fit on a +22 wheel in the front though? Previous shop told e it wouldn't or its be super close

w0rM · 06-22-2013, 05:46 PM

Bottom line, you're going to need at least a 255 or 265 to even hold air on a 10.5. A 255 is going to give you about a half inch stretch (quarter inch inner and a quarter inch outer). That should work. I would think that would fit. 265 is really going to be pushing it with those offsets up front.

nogoodname · 06-22-2013, 05:47 PM

Post pics of the fitment in order to tell you how much wider you can go. It all depends on your alignment adjustments and drop. You must have installed them, right?

Also, I'm surprised the front isn't holding air. A 245 on a 10.5 is doable and it's pretty stretched but I've seen it many times and its ok.

Unique_Z · 06-22-2013, 11:51 PM

Quote:

Originally Posted by Jbwrecked

Will 265 or 275 fit on a +22 wheel in the front though? Previous shop told e it wouldn't or its be super close

Yes you can, but you need to get more camber upfront.

.c2 · 06-23-2013, 12:38 AM

I'm dropped on KW V1 with about 1 finger gap with a 19x10.5 +12 and have had both 255 and 265 up fronts. Not sure if you're talking about fitting the fenders or clearing the suspension, but +22 with stock fenders on 265 will definitely be fine on the outside. Not sure about clearing struts though but I'm assuming it will be fine as well, I have quite a bit of clearance on the inside.

Have about -1.8 camber up front. Running 305/30 in the rear on 19x11 +13 with -3.2 camber but going to straighten that out on my next alignment

Jbwrecked · 06-23-2013, 01:30 AM

Quote:

Originally Posted by w0rM

Bottom line, you're going to need at least a 255 or 265 to even hold air on a 10.5. A 255 is going to give you about a half inch stretch (quarter inch inner and a quarter inch outer). That should work. I would think that would fit. 265 is really going to be pushing it with those offsets up front.

Sounds good 265 or 255 is what I'm looking for

Quote:

Originally Posted by nogoodname

Post pics of the fitment in order to tell you how much wider you can go. It all depends on your alignment adjustments and drop. You must have installed them, right?

Also, I'm surprised the front isn't holding air. A 245 on a 10.5 is doable and it's pretty stretched but I've seen it many times and its ok.

Will do on the pics, and I have no drop get I'm still stock height but I don't want to drop then not be able to turn. Worst case scenario I hold off on the drop

Quote:

Originally Posted by Iwan72

Yes you can, but you need to get more camber upfront.

I'll keep that in mind. I'm stock suspension all around still though

Quote:

Originally Posted by .c2

I'm dropped on KW V1 with about 1 finger gap with a 19x10.5 +12 and have had both 255 and 265 up fronts. Not sure if you're talking about fitting the fenders or clearing the suspension, but +22 with stock fenders on 265 will definitely be fine on the outside. Not sure about clearing struts though but I'm assuming it will be fine as well, I have quite a bit of clearance on the inside.

Have about -1.8 camber up front. Running 305/30 in the rear on 19x11 +13 with -3.2 camber but going to straighten that out on my next alignment

Sounds good then. I'm just talking about fitting fenders. Haven't even thought about the inside strut. But I'm 19x10.5 +22 so I have a bit more clearance on the inside.
Also though what sidewall size have you ran? 255/35/19? Or 255/40/19? Same with the 265

Thanks for all the help guys. I'll try to take pics of my undrivable car tomorrow morning

.c2 · 06-23-2013, 01:35 AM

255/40/19 was my previous tire size, I'm at 265/35/19 now with no issues. With 19x10.5 +22 you should be completely fine with either of those tire sizes fender wise

Jbwrecked · 06-25-2013, 01:56 AM

Sorry for all the pics

Rear

Front

.c2 · 06-25-2013, 02:33 AM

Looks good! Needs a drop though

Jbwrecked · 06-25-2013, 03:14 AM

Thank you sir!

Now do y'all think 265/35/19 would be fine? I think I'm picking up a set tomorrow if not the next day to finally get the car up and running. Also how do you check to see if I have enough room to clear the suspension? Do you jack up the car and look underneath or do I just turn the wheel and see if it rubs? If I'm able to check and see before I get these tires that'd be greatttttt.

Jbwrecked · 06-26-2013, 03:23 PM

Ended up ordering 265/35/19 Pilot Super Sports so I'll update the thread with some pics and info in a bit when I get them on! Pretty stoked but scared how the car will handle with almost bald rears and brand new fronts. Still have the stock 275/35/19 in the rears.

.c2 · 06-26-2013, 05:19 PM

Nice! I'm running PSS 265/35/19 in the fronts as well. You should be completely fine. Stick your hand in there and see how much room you have with the inner tire sidewall against the shock

Boost_lee · 06-27-2013, 01:56 AM

Looks good Jerry. I gotta check it out one of these days

06-22-2013, 12:49 PM	#1 (permalink)
Jbwrecked Base Member Join Date: Nov 2012 Location: SA Posts: 240 Drives: 2009 Nissan 370z Rep Power: 12	19x10.5 +22 19x11 +18 So made the mistake of trading my Volks for my Work CR Kai in the above mentioned offsets. I had the stock 245/40/19 fr and 275/35/19 rr Potenza Re050 tires and the rear stretches and holds air but the fronts stretch too much and won't hold air unfortunately. Love my new wheels but just gotta get the expropriate tires. Basically I wanna ask for suggestions as to what size tires I'm able to throw up in the front. I'm still stock height but I plan on dropping about an inch or so in the future. Thanks guys. I'll upload some pics later when I get a chance. dirTy_shoeZ likes this. __________________ N/A Solid Red 2009 370z DD - Work Emotion CR-Kai 19x10.5 +22 19x11 +18 - Clutch Helper Spring - NEED MOAR MODZ! 1/4 Mile 13.56 @108.38

06-22-2013, 02:16 PM	#2 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	If you're into meaty tires, then go 265/35 or 275/35 fronts and 295/30 or 205/30 rears __________________ My Z Build UniqueZ

06-22-2013, 05:27 PM	#3 (permalink)
Jbwrecked Base Member Join Date: Nov 2012 Location: SA Posts: 240 Drives: 2009 Nissan 370z Rep Power: 12	Will 265 or 275 fit on a +22 wheel in the front though? Previous shop told e it wouldn't or its be super close __________________ N/A Solid Red 2009 370z DD - Work Emotion CR-Kai 19x10.5 +22 19x11 +18 - Clutch Helper Spring - NEED MOAR MODZ! 1/4 Mile 13.56 @108.38

06-22-2013, 05:46 PM	#4 (permalink)
w0rM A True Z Fanatic Join Date: May 2012 Location: Houston, TX Posts: 2,198 Drives: 2015 Corvette Z06 Rep Power: 36	Bottom line, you're going to need at least a 255 or 265 to even hold air on a 10.5. A 255 is going to give you about a half inch stretch (quarter inch inner and a quarter inch outer). That should work. I would think that would fit. 265 is really going to be pushing it with those offsets up front. __________________ \| SOLD September 14th, 2013 \| My Build Journal

06-23-2013, 12:38 AM	#7 (permalink)
.c2 Enthusiast Member Join Date: May 2012 Location: BC Canada Posts: 414 Drives: 09 370z MB 6MT Rep Power: 13	I'm dropped on KW V1 with about 1 finger gap with a 19x10.5 +12 and have had both 255 and 265 up fronts. Not sure if you're talking about fitting the fenders or clearing the suspension, but +22 with stock fenders on 265 will definitely be fine on the outside. Not sure about clearing struts though but I'm assuming it will be fine as well, I have quite a bit of clearance on the inside. Have about -1.8 camber up front. Running 305/30 in the rear on 19x11 +13 with -3.2 camber but going to straighten that out on my next alignment dirTy_shoeZ likes this. __________________ Instagram // Build Thread Amuse / Mines / Bride / Momo / KW / Hotchkis / Motordyne / Invidia / Injen

06-22-2013, 05:47 PM	#5 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	Post pics of the fitment in order to tell you how much wider you can go. It all depends on your alignment adjustments and drop. You must have installed them, right? Also, I'm surprised the front isn't holding air. A 245 on a 10.5 is doable and it's pretty stretched but I've seen it many times and its ok.

06-23-2013, 01:35 AM	#9 (permalink)
.c2 Enthusiast Member Join Date: May 2012 Location: BC Canada Posts: 414 Drives: 09 370z MB 6MT Rep Power: 13	255/40/19 was my previous tire size, I'm at 265/35/19 now with no issues. With 19x10.5 +22 you should be completely fine with either of those tire sizes fender wise __________________ Instagram // Build Thread Amuse / Mines / Bride / Momo / KW / Hotchkis / Motordyne / Invidia / Injen

06-25-2013, 01:56 AM	#10 (permalink)
Jbwrecked Base Member Join Date: Nov 2012 Location: SA Posts: 240 Drives: 2009 Nissan 370z Rep Power: 12	Sorry for all the pics Rear Rear Front Front __________________ N/A Solid Red 2009 370z DD - Work Emotion CR-Kai 19x10.5 +22 19x11 +18 - Clutch Helper Spring - NEED MOAR MODZ! 1/4 Mile 13.56 @108.38

06-25-2013, 02:33 AM	#11 (permalink)
.c2 Enthusiast Member Join Date: May 2012 Location: BC Canada Posts: 414 Drives: 09 370z MB 6MT Rep Power: 13	Looks good! Needs a drop though dirTy_shoeZ likes this. __________________ Instagram // Build Thread Amuse / Mines / Bride / Momo / KW / Hotchkis / Motordyne / Invidia / Injen

06-25-2013, 03:14 AM	#12 (permalink)
Jbwrecked Base Member Join Date: Nov 2012 Location: SA Posts: 240 Drives: 2009 Nissan 370z Rep Power: 12	Thank you sir! Now do y'all think 265/35/19 would be fine? I think I'm picking up a set tomorrow if not the next day to finally get the car up and running. Also how do you check to see if I have enough room to clear the suspension? Do you jack up the car and look underneath or do I just turn the wheel and see if it rubs? If I'm able to check and see before I get these tires that'd be greatttttt. __________________ N/A Solid Red 2009 370z DD - Work Emotion CR-Kai 19x10.5 +22 19x11 +18 - Clutch Helper Spring - NEED MOAR MODZ! 1/4 Mile 13.56 @108.38

06-26-2013, 03:23 PM	#13 (permalink)
Jbwrecked Base Member Join Date: Nov 2012 Location: SA Posts: 240 Drives: 2009 Nissan 370z Rep Power: 12	Ended up ordering 265/35/19 Pilot Super Sports so I'll update the thread with some pics and info in a bit when I get them on! Pretty stoked but scared how the car will handle with almost bald rears and brand new fronts. Still have the stock 275/35/19 in the rears. __________________ N/A Solid Red 2009 370z DD - Work Emotion CR-Kai 19x10.5 +22 19x11 +18 - Clutch Helper Spring - NEED MOAR MODZ! 1/4 Mile 13.56 @108.38

06-26-2013, 05:19 PM	#14 (permalink)
.c2 Enthusiast Member Join Date: May 2012 Location: BC Canada Posts: 414 Drives: 09 370z MB 6MT Rep Power: 13	Nice! I'm running PSS 265/35/19 in the fronts as well. You should be completely fine. Stick your hand in there and see how much room you have with the inner tire sidewall against the shock Jbwrecked likes this. __________________ Instagram // Build Thread Amuse / Mines / Bride / Momo / KW / Hotchkis / Motordyne / Invidia / Injen

06-27-2013, 01:56 AM	#15 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	Looks good Jerry. I gotta check it out one of these days dirTy_shoeZ likes this. __________________ My TT Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] DPE S20 19x11 19x10 (Great Condition)	nugenzboss	Parts for sale (Private Classifieds)	53	02-11-2013 09:08 AM
[FOR SALE] Forgestar F14 19X10 19X11	ZLife	Parts for sale (Private Classifieds)	19	10-29-2012 11:08 PM
[FOR SALE] 19x10 & 19x11 Rays with Caps and TPMS	ZAKDADDY	Parts for sale (Private Classifieds)	22	04-28-2012 12:29 PM
Anybody running 19x10.5 +5 and 19x11.5 -10	Ni55anPat	Wheels & Tires	0	01-21-2012 09:45 PM