Nissan 370Z Forum  

19x10.5 +22 19x11 +18

Originally Posted by w0rM Bottom line, you're going to need at least a 255 or 265 to even hold air on a 10.5. A 255 is going to give you

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Wheels & Tires


Like Tree7Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 06-23-2013, 12:30 AM   #1 (permalink)
Base Member
 
Jbwrecked's Avatar
 
Join Date: Nov 2012
Location: SA
Posts: 240
Drives: 2009 Nissan 370z
Rep Power: 13
Jbwrecked is on a distinguished road
Default

Quote:
Originally Posted by w0rM View Post
Bottom line, you're going to need at least a 255 or 265 to even hold air on a 10.5. A 255 is going to give you about a half inch stretch (quarter inch inner and a quarter inch outer). That should work. I would think that would fit. 265 is really going to be pushing it with those offsets up front.
Sounds good 265 or 255 is what I'm looking for
Quote:
Originally Posted by nogoodname View Post
Post pics of the fitment in order to tell you how much wider you can go. It all depends on your alignment adjustments and drop. You must have installed them, right?

Also, I'm surprised the front isn't holding air. A 245 on a 10.5 is doable and it's pretty stretched but I've seen it many times and its ok.
Will do on the pics, and I have no drop get I'm still stock height but I don't want to drop then not be able to turn. Worst case scenario I hold off on the drop
Quote:
Originally Posted by Iwan72 View Post
Yes you can, but you need to get more camber upfront.
I'll keep that in mind. I'm stock suspension all around still though
Quote:
Originally Posted by .c2 View Post
I'm dropped on KW V1 with about 1 finger gap with a 19x10.5 +12 and have had both 255 and 265 up fronts. Not sure if you're talking about fitting the fenders or clearing the suspension, but +22 with stock fenders on 265 will definitely be fine on the outside. Not sure about clearing struts though but I'm assuming it will be fine as well, I have quite a bit of clearance on the inside.



Have about -1.8 camber up front. Running 305/30 in the rear on 19x11 +13 with -3.2 camber but going to straighten that out on my next alignment
Sounds good then. I'm just talking about fitting fenders. Haven't even thought about the inside strut. But I'm 19x10.5 +22 so I have a bit more clearance on the inside.
Also though what sidewall size have you ran? 255/35/19? Or 255/40/19? Same with the 265

Thanks for all the help guys. I'll try to take pics of my undrivable car tomorrow morning
dirTy_shoeZ likes this.
__________________
N/A Solid Red 2009 370z DD - Work Emotion CR-Kai 19x10.5 +22 19x11 +18 - Clutch Helper Spring - NEED MOAR MODZ! 1/4 Mile 13.56 @108.38
Jbwrecked is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[FOR SALE] **DPE S20 19x11 19x10 (Great Condition)** nugenzboss Parts for sale (Private Classifieds) 53 02-11-2013 08:08 AM
[FOR SALE] Forgestar F14 19X10 19X11 ZLife Parts for sale (Private Classifieds) 19 10-29-2012 10:08 PM
[FOR SALE] 19x10 & 19x11 Rays with Caps and TPMS ZAKDADDY Parts for sale (Private Classifieds) 22 04-28-2012 11:29 AM
Anybody running 19x10.5 +5 and 19x11.5 -10 Ni55anPat Wheels & Tires 0 01-21-2012 08:45 PM


All times are GMT -5. The time now is 07:26 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2