Flush with no spacers

cooltoy · 05-03-2013, 11:32 AM

What about a 19x9 wheel up front? Stock suspension.

OMGWTFBBQ · 05-03-2013, 11:55 AM

If you believe that 19x9.5 +22 is the "perfect" setup for the front, then you'd be looking at roughly a +15 offset on a 9" wheel.

cooltoy · 05-03-2013, 01:08 PM

Thank you.

Flybyenature · 10-14-2015, 11:08 PM

How would 20x10+8 / 20x11+1 look?

BlackZMamba · 03-15-2016, 08:28 PM

What about base 370z suspension for 19s? I am on BC coilovers. Vendor had recommended 19 x 9.5 F and 19 x11 R both +18mm offset

Aviator44 · 03-15-2016, 09:00 PM

Quote:

Originally Posted by BlackZMamba

What about base 370z suspension for 19s? I am on BC coilovers. Vendor had recommended 19 x 9.5 F and 19 x11 R both +18mm offset

Look at the white Z on the first page. It's running on KWV3s with 19x9.5+22 front and 19x10.5 +12 rear.

A 19x11 +18 is equal to a 19x10.5 +12.

If you set your ride height close to that Z, your car will essentially look exactly the same. Your front wheel will sit out an additional 4mm with the 19x9.5 +18.

So in a nutshell, those are good wheel sizes/offsets for coils.

Ghost116 · 03-15-2016, 11:10 PM

If I'm not mistaken and correct me if I'm wrong (I'm basing my sizing and purchase) off rustys sizes. I'm pretty sure he's at stock height and camber settings which I'm not sure how different the nismo camber/hieght is to a non nismo. But to anyone looking I would go off his sizes. Depending on tire man as well.

Rusty · 03-15-2016, 11:30 PM

Quote:

Originally Posted by Ghost116

If I'm not mistaken and correct me if I'm wrong (I'm basing my sizing and purchase) off rustys sizes. I'm pretty sure he's at stock height and camber settings which I'm not sure how different the nismo camber/hieght is to a non nismo. But to anyone looking I would go off his sizes. Depending on tire man as well.

I'm a stock height Nismo. Front camber is -2, rear camber -1.75 when the pictures were taken. Front rims - 9.5x19, +25. Rear 12x19, +28.

Ghost116 · 03-16-2016, 07:46 AM

Quote:

Originally Posted by Rusty

I'm a stock height Nismo. Front camber is -2, rear camber -1.75 when the pictures were taken. Front rims - 9.5x19, +25. Rear 12x19, +28.

Little out of spec on camber but close

. do u by any chance know if you were to add 5mm or so to your offset (push wheel in more) and remove camber of the 12 would fit and not touch the inside anywhere?

Rusty · 03-16-2016, 11:31 AM

Quote:

Originally Posted by Ghost116

Little out of spec on camber but close

. do u by any chance know if you were to add 5mm or so to your offset (push wheel in more) and remove camber of the 12 would fit and not touch the inside anywhere?

Give me some time to look under the Z and see what's close. I know as I sit now. The top of the tire is about 1"~1.5" away from the top of the rear shock. If I had true coilovers on. It will be a lot closer because of the spring.

Ghost116 · 03-16-2016, 04:45 PM

Thanks man no rush it's still **** weather up here. And that is an interesting call about the true coil over. I want to run twelves but want to stay within spec on camber. Was also looking at a set of bc racing coils but they are true coils so maybe not

03-15-2016, 08:28 PM	#5 (permalink)
BlackZMamba Enthusiast Member Join Date: Oct 2012 Location: La Salle, IL Posts: 345 Drives: 2013 Z @ 321 whp Rep Power: 13	What about base 370z suspension for 19s? I am on BC coilovers. Vendor had recommended 19 x 9.5 F and 19 x11 R both +18mm offset __________________ Mods: ECUtek \| Stillen \| Fujimura \| BC Racing \| SPC \| Avant Garde \| Fast Intentions \| Z1 Motorsports \| Akebono \| Cooper \| Redline \| Motul \| Mobil 1

03-15-2016, 11:10 PM	#7 (permalink)
Ghost116 Base Member Join Date: Aug 2015 Location: Ontario Posts: 167 Drives: Up coming Rep Power: 367	If I'm not mistaken and correct me if I'm wrong (I'm basing my sizing and purchase) off rustys sizes. I'm pretty sure he's at stock height and camber settings which I'm not sure how different the nismo camber/hieght is to a non nismo. But to anyone looking I would go off his sizes. Depending on tire man as well. Rusty likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
30K Fluid Flush	travnflorida	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	14	01-04-2012 02:51 AM
Flush Spacerss?	Miki	Brakes & Suspension	15	12-09-2011 07:32 PM
Flush or not?	drum1972	Wheels & Tires	10	10-21-2010 04:22 PM
Flush.	Gunzero	Wheels & Tires	22	06-26-2010 11:31 PM
hella flush G35	nogoodname	The Lounge (Off Topic)	122	09-19-2009 08:27 AM

05-03-2013, 11:32 AM	#1 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,983 Drives: 14 PW 370Z S/T MT Rep Power: 243722	What about a 19x9 wheel up front? Stock suspension.

05-03-2013, 11:55 AM	#2 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4550	If you believe that 19x9.5 +22 is the "perfect" setup for the front, then you'd be looking at roughly a +15 offset on a 9" wheel.

05-03-2013, 01:08 PM	#3 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,983 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Thank you.

10-14-2015, 11:08 PM	#4 (permalink)
Flybyenature Base Member Join Date: Aug 2014 Location: Bronx, NY Posts: 126 Drives: 09 Nissan 370z Base Rep Power: 11	How would 20x10+8 / 20x11+1 look?

03-16-2016, 04:45 PM	#11 (permalink)
Ghost116 Base Member Join Date: Aug 2015 Location: Ontario Posts: 167 Drives: Up coming Rep Power: 367	Thanks man no rush it's still **** weather up here. And that is an interesting call about the true coil over. I want to run twelves but want to stay within spec on camber. Was also looking at a set of bc racing coils but they are true coils so maybe not