Tire/wheel guys- need help!

Volk Z · 03-28-2013, 12:36 PM

Quote:

Originally Posted by NickTurnon

This is from the seller/friend from Z Club.
im selling them new but mounted previously ( ZERO brake dust in barrels proves never seen the street) for 1600 bucks obo including all tires.

The bolt parttern was for nissan 350z, 370z 5x114.3

These are deep concave wheels in Brnze burst powdercoat
One wheel has a small scratch on the wheel face, not from curbing etc.
Tires are used but are at 85-90 percent and show no odd wear or balding from camber etc.

sizes are as follows:
fronts 20x9.5 +7
rears 20x12 +39

tires are yokohama s drives 245 30 20
and PIRELLI PZero NERO 325 25 20... these are 569 dollar ea tires folks.

carbon fiber FS centercaps are included as well and are still previously unmounted.
these also include nissan TMPS already installed in rear, and are included loosely for the fronts

the fronts have room to have about 5mm removed.. making them a +12, this would cost 75 dollars per wheel at Tempe Wheel Specialists. [/COLOR]

A +12 front on a 9.5 width is done... You won't be able to slam the car without rubbing issues (rolling fenders with possible pulling fender as well if slammed) but with a moderate drop you should be ok.

But again the rear offset with the width wouldn't match the front. You should do a 19x11+10 to match that front 9.5+12.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What tire pressure do you guys use?	Matt_370Z	Wheels & Tires	9	07-23-2012 10:14 PM
Guys with Sport Wheels, Post up the tire sizes you have switched to.	red6spd	Wheels & Tires	66	03-14-2012 10:59 AM
What do you guys think about this wheel?	CC_370z	Wheels & Tires	20	10-19-2011 02:14 PM
Hey guys, NEW here but don't own a Z, but work off your Wheel offsets :)..	Bpearl2010	Introduction	9	05-11-2011 05:08 PM
You guys like this CONCAVE wheel??	jav@vossen	Wheels & Tires	12	08-07-2009 10:54 PM