Need help with tire fitment on 20x10.5 for front!

NOFATCHX · 02-26-2013, 12:14 AM

I'm still learning the variations of offsets, just when I think I've got it all figured out I learn more, the change from 9 width to 10.5 and the offset change eith the width chsnge is still confusing me

tturbo370z · 02-26-2013, 02:01 AM

Quote:

Originally Posted by NOFATCHX

Okay so guess my question is... What's the best way to fit a deeper concave wheel on front?
20x10.5 +25 offset with 265 or 255 tire. Diego is there a 20x9 offered with a better offset for more concave goodness?

Thanks for the input guys!

Funny I found this thread as I was just on the phone with vossen today asking the same questions about the same wheels and the same 10.5 all around and how did u make this work. This is going to be the set of wheels I'm gonna roll on while I figure out what custom wheels to roll on while the wife cools down after all the cash I dropped on the Z at GTM. Good luck on your quest bro, as I am not rolling any fenders or modifying the body to fit these wheels that agressive. If looks sweet thou, but that's what custom wheels are made for with more options in rim size and offsets. Let us know how it turns out

bullitt5897 · 02-26-2013, 11:09 AM

Quote:

Originally Posted by NOFATCHX

Okay so guess my question is... What's the best way to fit a deeper concave wheel on front?
20x10.5 +25 offset with 265 or 255 tire. Diego is there a 20x9 offered with a better offset for more concave goodness?

Thanks for the input guys!

with 1 piece forged wheels and deep concave you will need a wider rim for structural integrity (simple terms)... You might want to follow the setup they went with on the 265... yes there are less tire options but it will meet your goal...

diego@vossen · 02-26-2013, 11:53 AM

The 20x9 only comes with a +20, here is my car with 20x10.5 +15! No front fender mods but i am running -3.6 camber on stock arms and Hankook 255/30/20.

Few shots!

20x10.5/20x10.5

Side shot!

Few more

The things we do to achieve the stance look lol.

Rear camber at -3.8 also on stock camber arms

diego@vossen · 02-26-2013, 11:57 AM

Here was my previous 2008 G37s with the exact same specs as above!

Elcovorock · 02-27-2013, 04:21 AM

Since your going with a complete rectangle installation here is what your looking at. Your new methodologies will sit roughly 28mm+ out from your present front side rim installation... generally, individuals run a 9.5 +15 with a 255 front side. A 255 or 265 would be my kick off factor and this is going to rely on rim product as well.... . .

NOFATCHX · 02-28-2013, 12:42 AM

Couple guys who have 10.5 up front said their running 225 up front w obvious stretch. Is this necessary?! I'm running a 245 up front now on a 9 wheel, could I at the very least get away with a 245 on 10.5 if a stretch is necessary?

diego@vossen · 02-28-2013, 03:22 PM

I wouldn't stretch if you do not have to. A 255/35/20 would hardly looked stretched. Here is a Picture of my 255/30/20 on a 10.5! Hope this helps.

255/30/20

255/30/20 +15

Same as above ^^^

255/30/20

20x10.5 +25 265/30/20 + Camber at -1.4 F&R WIn/Win with Dual Concave.

chrischhorn · 02-28-2013, 06:06 PM

( Click to show/hide )

Car looks amazing but I wouldnt say that is "hardly" stretched lol.

NOFATCHX · 02-28-2013, 07:11 PM

Looks awesome Diego thanks! I'm going for the 25 offset, that's plenty more concave and it doesn't require to much messin around.

02-26-2013, 12:14 AM	#16 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	I'm still learning the variations of offsets, just when I think I've got it all figured out I learn more, the change from 9 width to 10.5 and the offset change eith the width chsnge is still confusing me __________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

02-27-2013, 04:21 AM	#21 (permalink)
Elcovorock Base Member Join Date: Feb 2013 Location: USA Posts: 5 Drives: Nissan 350z Rep Power: 12	Since your going with a complete rectangle installation here is what your looking at. Your new methodologies will sit roughly 28mm+ out from your present front side rim installation... generally, individuals run a 9.5 +15 with a 255 front side. A 255 or 265 would be my kick off factor and this is going to rely on rim product as well.... . . __________________ surfers paradise car hire

02-28-2013, 12:42 AM	#22 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	Couple guys who have 10.5 up front said their running 225 up front w obvious stretch. Is this necessary?! I'm running a 245 up front now on a 9 wheel, could I at the very least get away with a 245 on 10.5 if a stretch is necessary? __________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

02-28-2013, 07:11 PM	#25 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	Looks awesome Diego thanks! I'm going for the 25 offset, that's plenty more concave and it doesn't require to much messin around. diego@vossen likes this. __________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z tire fitment	mpp9	Wheels & Tires	15	04-19-2018 03:58 PM
[FOR SALE] Vossen CV7 20x10.5 +25 with /without tire	endlessg37	Parts for sale (Private Classifieds)	0	09-09-2012 06:51 PM
Tire Fitment question	crazybeasty	Wheels & Tires	0	07-17-2011 04:40 PM
Tire fitment	mpp9	Wheels & Tires	0	10-04-2010 12:36 PM
can someone help me with tire fitment?	res0zsfa	Wheels & Tires	6	05-12-2010 02:18 PM

02-26-2013, 11:53 AM	#19 (permalink)
diego@vossen Track Member Join Date: Dec 2012 Location: Miami Posts: 614 Drives: Nismo 370Z 6MT Tech Rep Power: 14	The 20x9 only comes with a +20, here is my car with 20x10.5 +15! No front fender mods but i am running -3.6 camber on stock arms and Hankook 255/30/20. Few shots! 20x10.5/20x10.5 Side shot! Few more The things we do to achieve the stance look lol. Rear camber at -3.8 also on stock camber arms

02-26-2013, 11:57 AM	#20 (permalink)
diego@vossen Track Member Join Date: Dec 2012 Location: Miami Posts: 614 Drives: Nismo 370Z 6MT Tech Rep Power: 14	Here was my previous 2008 G37s with the exact same specs as above!

02-28-2013, 03:22 PM	#23 (permalink)
diego@vossen Track Member Join Date: Dec 2012 Location: Miami Posts: 614 Drives: Nismo 370Z 6MT Tech Rep Power: 14	I wouldn't stretch if you do not have to. A 255/35/20 would hardly looked stretched. Here is a Picture of my 255/30/20 on a 10.5! Hope this helps. 255/30/20 255/30/20 +15 Same as above ^^^ 255/30/20 20x10.5 +25 265/30/20 + Camber at -1.4 F&R WIn/Win with Dual Concave.