M310 with RE-11's

Huck · 02-15-2013, 01:32 PM

Yes I did. It wasn't bad at all. The only thing that took so long was that I had never done one before so I figured everything out on my own by playing around with it. It took me about 1.5 hours to do it, but now that I know what I'm doing it might take me 30-45 minutes.

The basic steps are jack up the car, open the hood, undo the two radiator core support bracket screws, pull up the radiator core support (I'm sorry, not radiator. FAN SUPPORTS), unbolt the old pulley (wedge something I there against the ground first) then bolt the new one in, and put everything back. I think it was about 35lbs tq spec for the pulley bolt.

I didn't need a pulley puller like some people stated I would. I don't know if that was case specific or not.

Sent from my iPizzle using magic and new-fangled science stuff

02-15-2013, 01:32 PM	#1 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 34	Yes I did. It wasn't bad at all. The only thing that took so long was that I had never done one before so I figured everything out on my own by playing around with it. It took me about 1.5 hours to do it, but now that I know what I'm doing it might take me 30-45 minutes. The basic steps are jack up the car, open the hood, undo the two radiator core support bracket screws, pull up the radiator core support (I'm sorry, not radiator. FAN SUPPORTS), unbolt the old pulley (wedge something I there against the ground first) then bolt the new one in, and put everything back. I think it was about 35lbs tq spec for the pulley bolt. I didn't need a pulley puller like some people stated I would. I don't know if that was case specific or not. Sent from my iPizzle using magic and new-fangled science stuff AlexRaymond19 likes this. __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Tx Brand New Tires- RE-11's 305/30/19-255/35/19	guru	Parts for sale (Private Classifieds)	14	12-10-2012 11:01 PM
Re-11's on S-Tune's	nismosis	Wheels & Tires	2	07-24-2012 10:05 PM
Does anyone feel high 11's NA are possible with the 370?	Methodical4u	Track / Autocross / Drifting / Dragstrip	55	09-12-2011 07:08 PM
RE-11's mounted, but WTF?	FastJew	Wheels & Tires	86	05-07-2011 02:54 PM
Bridgestone RE-11's mounted	ChrisSlicks	Wheels & Tires	29	06-09-2009 07:55 PM