NEED HELP!!!!!!!!!!!! Fitment question..
 

I just dropped my Z with H&R spring and found a set of Maya RT-5 20" wheels.. If they have a +35 offset, will I be rubbing with this drop?? Please help this is going down this week and I really don't want to look like an *** here! Thanks

Wheel widths? Tire sizes? +35 offset for the rears is WAY to high. Even on the fronts depending on the wheel widths.

20x9 front and 20x10 with a +35 offset was all that was stated.. I'm open to suggestions on the rubber sizes as they do not come with them.

Nope, not ideal at all since you want to keep in the +22 or lower setup (depending on brakes)

Maya's will be heavy too, keep searching

Yikes... Those sound like Altima offsets and widths...

Quick version-
Stick with 9.5 front 10.5 rear widths..
Keep the offsets at/below +22 for the front and +15 for the rear.

Keep in mind when you go with a thinner/wider rim the number of offset would change the position from the hub.

Here you go bro- Offset calculator. Put in the stock specs then your new spec below
it will tell you if it retracts or extends so you will know for fitment.
Wheel Offset Calculator

Thank you thank you everyone:tiphat:

I like this one more:
Custom rims, wheel tire packages for your ride - RIMSnTIRES.com