Powdercoating 3 piece SSR SP3 wheels

Xplicit97

Ok guys I tried searching for this but either my key word search was wrong or it hasn't been covered.. Which I find hard to believe... Yes I tried it using just 3 piece wheel too.... Lol So my question is this.. Does anyone have any experience with assembly and re assembly of SSR wheels? Im going to be getting my new set powder coated, and I am guessing I'm going to need to disassemble and resemble myself. So I've seen a lot of articles on different forums saying you should replace the hardware re seal etc etc. So I wanted to know if new hardware is necessary, and if so where I can get it. What kind of sealant to use and where to use it, ie mating service joint etc? Also a torque value would be appreciated as well.

Some people seem to hold the opinion of disassembling only as a last resort, due to it being such a pita and the margin for error. So any experience you can share would be appreciated as well. Basically I would like to know if this is something I can and should take myself to save some money, or is it better left to professionals. I am a naval mechanic by trade so I am mechanically inclined, just concerned about taking apart $3k wheels and not having them go back together lol

Sent from my SPH-L710 using Tapatalk 2

__________________
[B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

EZT

Mike should be able to more accurately answer your question, but I do know it will require a new sealant on the wheel since it is a 3-piece. My Volks were a 2-piece and much simpler to reassemble.

W.O.W. 370Z

The right way is to disassemble, paint and reassemble (which includes resealing).

Don't cut corners IMHO.

Mike

I have no experience with SSR Wheels, but I did coat the three piece OZ Wheels I had on my corvette.


The two halves of the rim were sealed together at assembly with some type of sealant, and I was unable to separate the halves, so I coated them together. Just to be safe, I ran a layer of silicone sealant over the original sealant afterwards, but I think that was overkill. As for the bolts, you should be fine reusing those.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

Xplicit97

Realistically I should only.need to remove the face correct? The only reason I would be disassembling would be to facilitate the powder coating. I may only be coming the face anyhow I haven't decided. I know I want the faces to be like the blue on.my old strasse wheels I had ( bullits old wheels)

Sent from my SPH-L710 using Tapatalk 2

__________________
[B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

rubicant

SSR SP3s faces are top mounted. You can pull the face out without having to disassemble the barrels. However, the barrels are welded together as a safety precaution(strength and to prevent leaking) once everything is bolted together and then the silicone is applied.

They don't sell the hardware separately and the hardware is a pretty unique size, so be careful taking them apart. SSR doesn't recommend taking the wheels apart because again, this is a safety concern. They wouldn't want anything to happen as a result of them being re-assembled incorrectly. SSR does offer some different colors that they can do for you when the wheel is being ordered.

W.O.W. 370Z

You will probably have leaking issues. Why reluctant to take apart?

Just get them professionally taken apart,painted, then reassembled.

If you only take off the face and paint, let us know how it goes.

bullitt5897

That blue was painted btw... BASF Carrizma Candy Blue

__________________
Shop Cars: 2013 318whp Nismo VspecII 370z *SOLD*, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054

Xplicit97

Thanks Mike loved the color, a friend of mine with a red nismo has them now.. I found a place locally that can powder coat them very close to the carrizma candy blue.. wish I still had those but I couldn't get them to fit right.. they're in good hands though

Sent from my SPH-L710 using Tapatalk 2

__________________
[B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

Xplicit97

Problem is.finding a place locally that will disassemble and resemble locally that won't rape me in the process lol and SSR doesn't offer the color I want so I have to find a way around it.

Sent from my SPH-L710 using Tapatalk 2

__________________
[B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

sparky

Just thinking out loud so to speak, but can you just buy the powder color you want and send it with the wheels?

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

Xplicit97

Are you referring to sending the powder coating to SSR in Japan? Or whoever I have do the wheels? My main issue is finding a shop locally that will disassemble powder coat and then resemble without having to go to a different shop for each step of the process. I really don't want to have to pay shipping both ways hence wanting to stay local... Seattle / Puget sound people have any suggestions?

Sent from my SPH-L710 using Tapatalk 2

__________________
[B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

Mike

If they are top mounted centers and you are just doing the centers you won't have any problem at all. Even if the fasteners are unique, and you do need to replace them, You can find replacements. I had to order a special tool and new rim screws from a specialty place in Germany for my OZ wheels.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

Xplicit97

Thanks Mike.. So when I re-seal these will it be on the mating surface with some permatex or ultra blue type sealant? Or should I use a silicone based sealant?

Sent from my SPH-L710 using Tapatalk 2

__________________
[B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

sparky

Sorry, I thought you had someone to do all this already but didn't have or wouldn't offer you the color you wanted. Good luck and posts pics when you do get them done.

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates