Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   Camber with 25mm rear spacers (http://www.the370z.com/wheels-tires/64311-camber-25mm-rear-spacers.html)

pseftis 12-12-2012 05:07 PM

Camber with 25mm rear spacers
 
What camber you guys running? Don't want to rub fenders with tires.

djtodd 12-12-2012 07:33 PM

Personally...less spacer, very little camber :)

OMGWTFBBQ 12-12-2012 09:09 PM

I'm confused.

What exactly are you asking? 25mm spacers? What width and offset are your wheels to begin with?

Z-Girl 12 12-12-2012 09:13 PM

Quote:

Originally Posted by OMGWTFBBQ (Post 2057557)
I'm confused.

What exactly are you asking? 25mm spacers? What width and offset are your wheels to begin with?

Ditto

pseftis 12-12-2012 09:37 PM

Quote:

Originally Posted by Z-Girl 12 (Post 2057562)
Ditto

camber setting when u get ur alignment done...
specified range is -2.2 deg -1.2 deg
thinking i have to have it set at -2.5 or higher so i wont have rubbing issue in wheel well

enkei2k 12-12-2012 09:46 PM

what we're asking is, what tire/wheel combo do you plan on using these 25mm spacers for?

are you using these spacers on stock rays? base 18's? 19x9.5 +22 in the Front and 19x10.5 +12 in the Rear? beefy tires? stretched tires? need more information.

OMGWTFBBQ 12-12-2012 09:51 PM

Tell us your ride height or what springs/coils you're on, how wide your wheels are, what offset your wheels are, and what tire size you plan on running. We will let you know what camber setting you should be at.

Or you could make it even simpler for you and tell us what you plan on doing with your car. Hellaflush? Mexipoke? Slammed and tucked? Meaty tires because racecar? 4x4?

pseftis 12-13-2012 12:02 AM

Quote:

Originally Posted by OMGWTFBBQ (Post 2057617)
Tell us your ride height or what springs/coils you're on, how wide your wheels are, what offset your wheels are, and what tire size you plan on running. We will let you know what camber setting you should be at.

Or you could make it even simpler for you and tell us what you plan on doing with your car. Hellaflush? Mexipoke? Slammed and tucked? Meaty tires because racecar? 4x4?

Stock rays
Swift springs
Stock tires
:) thx!!

djtodd 12-13-2012 12:10 AM

Any reason you want such large spacers/positive camber?

pseftis 12-13-2012 12:19 AM

Quote:

Originally Posted by djtodd (Post 2057924)
Any reason you want such large spacers/positive camber?

Like how the car looks with wider stance

Z-Girl 12 12-13-2012 05:41 AM

Can't give u camber numbers but w/front/rear camber kits my alignment guy said he squeezed as much as he could to get me close 2 spec. Tire wear is very minimal and I'm totally digging the stance.I'm running 20mmf/25mmr stock rays with inch drop on coils. No rubbing in the rear but some in the front over rough roads. Got a few pics in my album.

tefft19 12-13-2012 09:52 AM

I am putting my spacers In this weekend. I will let you know how it goes!

MyKindaGuise 12-13-2012 10:13 AM

Quote:

Originally Posted by pseftis (Post 2057596)
camber setting when u get ur alignment done...
specified range is -2.2 deg -1.2 deg
thinking i have to have it set at -2.5 or higher so i wont have rubbing issue in wheel well

Same here. -2.5 rear. With 25mm on stock rays and swifts. I could go to -2.0 and not rub.

tibal 12-13-2012 10:31 AM

No rubbing issues with 25R spacer and 295/30 on stock rays H+R drop. Stock camber

OMGWTFBBQ 12-13-2012 01:26 PM

Quote:

Originally Posted by pseftis (Post 2057914)
Stock rays
Swift springs
Stock tires
:) thx!!

I'm on stock rays, stock size tires (Hankook V12 Evos), KWV3 (pretty sure they're set lower than Swift springs).

30mm spacer in the rear on stock alignment. No issues whatsoever. :tup:

pseftis 12-13-2012 04:25 PM

1 Attachment(s)
Attachment 59193

MyKindaGuise 12-14-2012 02:13 PM

Meh its not perfect and some would say its no good but honestly. Im close to that alignment and I like the look and feel of the neg camber.


All times are GMT -5. The time now is 04:16 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2