19" Stock Rays wheels powdercoat project

Mike · 06-28-2009, 08:15 AM

Quote:

Originally Posted by fly yellow

I like the black powder coat and the stripe around the lip. I might have to consider doing that with a yellow stripe. I already have a couple dings around the lip of my rims, can those be fixed?

yes, they can be sanded smooth and coated over. Minor imperfections can be filled in with powder. If they are really deep, they can be filled in with metal filler and sanded back smooth before coating.

FricFrac · 06-28-2009, 01:21 PM

I like the thin outer edge but not red up on the "Z". I also think if you are going to make the silver rims black to match the car you may as well get rid of the silver on the door handles, lights, etc....

Phimosis · 06-30-2009, 02:51 AM

Here's some brand new shots after a layer of clear powdercoat over the pinstripe!

Fresh out of the oven:

Up close:

Direct sunlight:

Close up shot of pinstripe:

Phimosis · 06-30-2009, 03:10 AM

Tire mounting pictures....

New 305/30/19 Bridgestone RE11's:

Pictures of the sidewall. A lot of threads talk about 305 width being too wide for the rear wheel and the rear tires bulging, so I took a few shots. Note that the tires have a recessed bead, not to be confused with sidewall bulge.

Phimosis · 06-30-2009, 03:14 AM

Now for the good stuff! I don't have the center caps painted yet, but within a few days...... will post more as I get things finished up.
I just got these mounted tonight, ran them home, bolted them up, got the car off of the jack stands and ran it into the sunset. As I drove out of town, I finally got away from the shadows and buildings and found a dirt road that was still getting direct sunlight. Unfortunately, this was all I had to work with:

Notice the red dot on the fender....It was the sun as it was setting behind the hills. LOL.

In the dark, the color is a little more red-orange

Even more unfortunately, On my way home I came upon an accident where a soccer mom in an Escalade T-Boned a motorcyclist at speed. Poor guy had one leg hanging buy a few pieces of tissue, totally folded up under his body. I took my shirt off and used it as a tourniquet to control arterial bleeding while we waited for the paramedics. I parked my car diagonally in the road to create a safe zone for people at the edge of the street helping this guy. When the police came they thought my car was involved in the wreck, too. I'll see if I can find an x-ray of this disaster tomorrow at work.
Totally ruined my perfect day with my new wheels on the Z. :-(

Minicobra1 · 06-30-2009, 03:51 AM

Nice job, they look good mounted up

Mike · 06-30-2009, 06:57 AM

sucks about the accident, but good thing you were there to help. Wheels look great! Nice to see the final product, as I was going to do something really similar had I not bought the nismo wheels.

Zerafian · 06-30-2009, 12:04 PM

Nice on,e jumpnig in and helping that guy out...coulda been like most of us and ben dumbfounded.

As for the rims, now you need so 25mm spacers to widen the stance..they are hidden under the flare.

Phimosis · 06-30-2009, 12:55 PM

Quote:

Originally Posted by Zerafian

Nice on,e jumpnig in and helping that guy out...coulda been like most of us and ben dumbfounded.

As for the rims, now you need so 25mm spacers to widen the stance..they are hidden under the flare.

I have 15mm spacers sitting in my kitchen just waiting to get put on! I was afraid to go any wider since I am now running 305 width tires.

On another note, here's the x-rays of the guy's leg in the accident:

First one is femur. Second one is tibia/fibula.
:sad:

fuct · 06-30-2009, 03:19 PM

OMG!!! will that leg be savable? is it worth the years of rehabilitation?

nogoodname · 06-30-2009, 03:24 PM

Helping a fella out is not ruining a day. That made the day for that guy and that is so FTW!!

Also, the headlight housing and door handles need to be blacked out.

I still think of Knight Rider....lol

Phimosis · 06-30-2009, 06:18 PM

When I was at the scene, the paramedics told the motorcyclist they were taking him to the trauma center where I work. I checked up on him this morning and unfortunately they had to amputate his leg at the knee.

I'm a motorcyclist as well as a medical doctor and when I see human tragedy like this it does ruin my day. That could have been me on the pavement and this guys life will forever be worse than before this day.

Caravanshaka · 06-30-2009, 10:54 PM

Dude, Antelope Valley Nissan? I was born in Palmdale and lived in Lancaster for years

Damn that leg got tore up. What about the rest of him, anything else major? Poor guy lost his leg, but at least he didn't lose his life after getting hit by an escalade.

initialgemini · 06-30-2009, 11:45 PM

The car looks sick! IMO it would look even better with some blacked out headlights. Looks good. Kinda reminds me of the A-Team Van color scheme.

eddieconfetti · 06-30-2009, 11:56 PM

how about a drive by. i wanna see the rims while spinning. that would be an interesting sight.

06-28-2009, 01:21 PM	#32 (permalink)
FricFrac A True Z Fanatic Join Date: Dec 2008 Location: Victoria, BC Posts: 1,481 Drives: 370Z 300ZX 280ZX 240 Rep Power: 229	I like the thin outer edge but not red up on the "Z". I also think if you are going to make the silver rims black to match the car you may as well get rid of the silver on the door handles, lights, etc.... __________________ '09 370Z - '93 300ZX Vert - '83 280ZX - '83 280ZXT -'81 280ZXT stroker - '72 240Z - Stillen CBE, HFC, G3, Grounding Kit, Sways // Swift Spring // H&R 15mm // 5% Tint // Clear Bra //

06-30-2009, 03:10 AM	#34 (permalink)
Phimosis Enthusiast Member Join Date: May 2009 Location: Oildale, CA Posts: 412 Drives: 2013 911 4S Rep Power: 416	Tire mounting pictures.... New 305/30/19 Bridgestone RE11's: Pictures of the sidewall. A lot of threads talk about 305 width being too wide for the rear wheel and the rear tires bulging, so I took a few shots. Note that the tires have a recessed bead, not to be confused with sidewall bulge. Last edited by Phimosis; 06-30-2009 at 05:25 AM.

06-30-2009, 03:14 AM	#35 (permalink)
Phimosis Enthusiast Member Join Date: May 2009 Location: Oildale, CA Posts: 412 Drives: 2013 911 4S Rep Power: 416	Now for the good stuff! I don't have the center caps painted yet, but within a few days...... will post more as I get things finished up. I just got these mounted tonight, ran them home, bolted them up, got the car off of the jack stands and ran it into the sunset. As I drove out of town, I finally got away from the shadows and buildings and found a dirt road that was still getting direct sunlight. Unfortunately, this was all I had to work with: Notice the red dot on the fender....It was the sun as it was setting behind the hills. LOL. In the dark, the color is a little more red-orange Even more unfortunately, On my way home I came upon an accident where a soccer mom in an Escalade T-Boned a motorcyclist at speed. Poor guy had one leg hanging buy a few pieces of tissue, totally folded up under his body. I took my shirt off and used it as a tourniquet to control arterial bleeding while we waited for the paramedics. I parked my car diagonally in the road to create a safe zone for people at the edge of the street helping this guy. When the police came they thought my car was involved in the wreck, too. I'll see if I can find an x-ray of this disaster tomorrow at work. Totally ruined my perfect day with my new wheels on the Z. :-( Last edited by Phimosis; 06-30-2009 at 03:37 AM.

06-30-2009, 03:51 AM	#36 (permalink)
Minicobra1 A True Z Fanatic Join Date: Nov 2008 Location: Orange County, CA. Posts: 1,205 Drives: 370Z Tour, Spt, 6mt Rep Power: 645	Nice job, they look good mounted up __________________ 370z Tour\| Spt Pack\|Navi\|BERK CBE\|Berk HFC's\| Eibach Springs\| Hotchkis Sway Bars\|SPC Camber Arms\|15mm Ichiba Wheel Spacers\| 19"Factory Nismo Wheels-Matt Black\|Stop Tech Rotors\|TWM Shifter\|3M Tint\|Black Fangs\|Black Rear Valance\|JDM Fog Light\| MY BAND-www.myspace.com/petroleum

06-30-2009, 06:57 AM	#37 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	sucks about the accident, but good thing you were there to help. Wheels look great! Nice to see the final product, as I was going to do something really similar had I not bought the nismo wheels. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

06-30-2009, 02:51 AM	#33 (permalink)
Phimosis Enthusiast Member Join Date: May 2009 Location: Oildale, CA Posts: 412 Drives: 2013 911 4S Rep Power: 416	Here's some brand new shots after a layer of clear powdercoat over the pinstripe! Fresh out of the oven: Up close: Direct sunlight: Close up shot of pinstripe:

06-30-2009, 12:04 PM	#38 (permalink)
Zerafian A True Z Fanatic Join Date: Jan 2009 Location: Chattanooga, TN Posts: 1,344 Drives: 13' MB 370z Rep Power: 30949	Nice on,e jumpnig in and helping that guy out...coulda been like most of us and ben dumbfounded. As for the rims, now you need so 25mm spacers to widen the stance..they are hidden under the flare. __________________ LC500 exhaust set uphttps://www.youtube.com/watch?v=bI7DiA43ZYw&t

06-30-2009, 03:19 PM	#40 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	OMG!!! will that leg be savable? is it worth the years of rehabilitation?

06-30-2009, 03:24 PM	#41 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	Helping a fella out is not ruining a day. That made the day for that guy and that is so FTW!! Also, the headlight housing and door handles need to be blacked out. I still think of Knight Rider....lol

06-30-2009, 06:18 PM	#42 (permalink)
Phimosis Enthusiast Member Join Date: May 2009 Location: Oildale, CA Posts: 412 Drives: 2013 911 4S Rep Power: 416	When I was at the scene, the paramedics told the motorcyclist they were taking him to the trauma center where I work. I checked up on him this morning and unfortunately they had to amputate his leg at the knee. I'm a motorcyclist as well as a medical doctor and when I see human tragedy like this it does ruin my day. That could have been me on the pavement and this guys life will forever be worse than before this day.

06-30-2009, 10:54 PM	#43 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	Dude, Antelope Valley Nissan? I was born in Palmdale and lived in Lancaster for years Damn that leg got tore up. What about the rest of him, anything else major? Poor guy lost his leg, but at least he didn't lose his life after getting hit by an escalade.

06-30-2009, 11:45 PM	#44 (permalink)
initialgemini Enthusiast Member Join Date: Mar 2009 Location: Irvine, CA Posts: 340 Drives: 2011 FX 35 Rep Power: 250	The car looks sick! IMO it would look even better with some blacked out headlights. Looks good. Kinda reminds me of the A-Team Van color scheme.

06-30-2009, 11:56 PM	#45 (permalink)
eddieconfetti A True Z Fanatic Join Date: Jun 2009 Location: Duluth, GA Posts: 3,334 Drives: A Totaled PW Z Rep Power: 23	how about a drive by. i wanna see the rims while spinning. that would be an interesting sight.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Want to buy 370z 19" stock Rays!	A32	Wanted	26	12-16-2011 07:19 PM
Stock 19" Rays w/ rubber FS	Solus	Parts for sale (Private Classifieds)	16	05-25-2009 11:52 AM
Stock 19" rays - 1600	DJcuetip	Southern California Region	0	04-20-2009 10:51 PM
WTB: Stock 19" sized wheels	spoolio	Wanted	1	04-12-2009 07:15 PM
WTB: Stock 19" sized wheels	spoolio	Parts for sale (Private Classifieds)	0	03-06-2009 09:59 PM