Let's say I wanted to get my nismo rims powder coated gunmetal - cost?

dmhenderson · 08-14-2012, 10:05 PM

Like the look of the new nismo rims and think they'd look great on my black car.

Would like to add to the end of my project plan

1slowa$$G35 · 08-14-2012, 10:45 PM

Most places charge around 70-100 per wheel at least in my area

dmhenderson · 08-14-2012, 11:04 PM

Is that with clearcoat? I've seen dudes with shitty powder rims that chip like hell and look terrible.

TreeSemdyZee · 08-14-2012, 11:10 PM

Check with Mike on here. He's a sponsor. www.thepowdercoater.com. I'm having problems with a recent powder pat on my S-tune rims and Mike tells me that they didn't cure them long enough. That's probably why your friends are chipping. The place I used does a lot of steel wheels, which hold heat a lot better than aluminum. My place "cooked" the wheels about half as long as Mike does.

dmhenderson · 08-15-2012, 06:47 AM

He's doing my calipers in a week or two. Too bad he's in Georgia - bit far to travel for a road trip or I'd have him do my wheels too.

birdmanx1 · 08-15-2012, 07:02 AM

/Slightly off topic. White with gunmetal def, black with gunmetal... not sure how that will turn out. Might want to see a few pics of those who got close to it.

/back on topic.
Jon (zcarman) had his done in Northern VA, I forgot the name of the shop but he highly recommended them. Reach out to him and he will point you the right direction since you don't want to send your rims to Mike.

dmhenderson · 08-15-2012, 01:58 PM

Thanks. Think I'll do that. Shipping rims would just be cost prohibitive. I sent ONE wheel via UPS ground to a friend in NC and it cost well over $100 in shipping charges.

daisuke149 · 08-15-2012, 03:49 PM

whoa no. Shipping wheels isnt 100$ for one. You should be able to ship all 4 for around 100$.

but def see if Mike can do em for ya. Ive seen some wheels he did years ago that still look amazing.

dmhenderson · 08-15-2012, 03:53 PM

Can't find a picture of a black nismo with 2013 gunmetal rims. Even nissan's site isn't being helpful.

dmhenderson · 08-15-2012, 09:37 PM

Yes please.

daisuke149 · 08-15-2012, 09:39 PM

if you get em done in a sorta black chrome sorta scheme, you could get matching door handles, emblems and side markers too

birdmanx1 · 08-17-2012, 03:01 PM

Quote:

Originally Posted by dmhenderson

Yes please.

I'm confused. Is that the 2013 Nismo? If so, I didn't know they came with gunmetal rims. To be honest, it looks OK with the metallic black.

shadoquad · 08-17-2012, 03:41 PM

Quote:

Originally Posted by birdmanx1

I'm confused. Is that the 2013 Nismo? If so, I didn't know they came with gunmetal rims. To be honest, it looks OK with the metallic black.

Yes, 2013 Nismo models come with GM rims.

Davgos · 08-17-2012, 03:45 PM

Anyone know the paint code for those GM rims off hand?

Rui Z · 08-17-2012, 03:59 PM

Quote:

Originally Posted by Davgos

Anyone know the paint code for those GM rims off hand?

RAYS is secretive about their colors. So sadly, there is no paint code.

08-14-2012, 10:05 PM	#1 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Let's say I wanted to get my nismo rims powder coated gunmetal - cost? Like the look of the new nismo rims and think they'd look great on my black car. Would like to add to the end of my project plan __________________

08-14-2012, 11:04 PM	#3 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Is that with clearcoat? I've seen dudes with shitty powder rims that chip like hell and look terrible. __________________

08-14-2012, 11:10 PM	#4 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 61 Posts: 4,887 Drives: '09 370 & ‘14 Juke Rep Power: 27409	Check with Mike on here. He's a sponsor. www.thepowdercoater.com. I'm having problems with a recent powder pat on my S-tune rims and Mike tells me that they didn't cure them long enough. That's probably why your friends are chipping. The place I used does a lot of steel wheels, which hold heat a lot better than aluminum. My place "cooked" the wheels about half as long as Mike does. __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb

08-15-2012, 06:47 AM	#5 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	He's doing my calipers in a week or two. Too bad he's in Georgia - bit far to travel for a road trip or I'd have him do my wheels too. __________________

08-15-2012, 07:02 AM	#6 (permalink)
birdmanx1 A True Z Fanatic Join Date: Jun 2010 Location: Baltimore, MD Age: 96 Posts: 3,175 Drives: 370z Nismo Rep Power: 24	/Slightly off topic. White with gunmetal def, black with gunmetal... not sure how that will turn out. Might want to see a few pics of those who got close to it. /back on topic. Jon (zcarman) had his done in Northern VA, I forgot the name of the shop but he highly recommended them. Reach out to him and he will point you the right direction since you don't want to send your rims to Mike. __________________ 370Z NISMO #0462 \| ClearBra \| 3M tint \| Head/Taillights \| Dynamat \| Black Roof \| Tommy Kaira HB \| CF Parts \| Berk HFCs \| FI SS \| NST Pulleys \| Takeda aFe \| K&N \| H&R Spacers \| Swift Spec R \| SPC F&R \| Zuperman M370 Nismo Vid \| Nismo Journal \| Nismo Rumble

08-14-2012, 10:45 PM	#2 (permalink)
1slowa$$G35 Track Member Join Date: Jun 2012 Location: Washington Posts: 853 Drives: 06 infiniti g35 cpe Rep Power: 14	Most places charge around 70-100 per wheel at least in my area

08-15-2012, 01:58 PM	#7 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Thanks. Think I'll do that. Shipping rims would just be cost prohibitive. I sent ONE wheel via UPS ground to a friend in NC and it cost well over $100 in shipping charges. __________________

08-15-2012, 03:49 PM	#8 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 32	whoa no. Shipping wheels isnt 100$ for one. You should be able to ship all 4 for around 100$. but def see if Mike can do em for ya. Ive seen some wheels he did years ago that still look amazing.

08-15-2012, 03:53 PM	#9 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Can't find a picture of a black nismo with 2013 gunmetal rims. Even nissan's site isn't being helpful. __________________

08-15-2012, 09:37 PM	#10 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Yes please. __________________

08-15-2012, 09:39 PM	#11 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 32	if you get em done in a sorta black chrome sorta scheme, you could get matching door handles, emblems and side markers too

08-17-2012, 03:45 PM	#14 (permalink)
Davgos Base Member Join Date: Sep 2011 Location: Mckinney, TX Posts: 3 Drives: 370Z G41 6MT Rep Power: 14	Anyone know the paint code for those GM rims off hand?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ray Wheels Powder coated	fran3365	Wheels & Tires	7	12-12-2011 10:52 AM
anyone wants powder coated black RAYS OEM rims in Vancouver?	VancouverZ34	Canada	4	03-15-2011 06:12 PM
anyone with black 370 with powder coated rims?	FueledByRamen	Wheels & Tires	18	11-18-2010 05:17 PM
Nismo factory rims powder coated GR-02	Minicobra1	Wheels & Tires	61	09-05-2010 11:36 PM
Powder Coated My tower BAr	lastblueprint	Southern California Region	14	06-13-2010 10:47 AM