19x9.5 +22 too much for the front?

JollyGoodChap

9.5 +22 for the front should be fine.

XwChriswX

Looks great! Black on black

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14

otacon88

How much does it stick out? Is flush the right terminology?

+22 it is after your pic! Also was debating between silver and black, but I may just well go with the black since I have a red just like yours

do you have any significant flush? Can't tell from the pic since it's from an angle and not straight on.

__________________
Performance: FI CBE 18inch resonators and CF mufflers | Pending - CAI
Show: CF License Plate Frame, Amuse Rear Bumper and side skirts, Seibon SR Front lip, Aerojacket Vented Fenders| Pending - SSR Type F, Springs, Tint, Sport Rear spoiler

Osiris

It is flush with the top apex of the fender...i could take pics straight on at ground level that may show a better angle...but i'll have to get those tomorrow if you really want those.

__________________

^^^^^^^^^Like our Facebook!^^^^^^^^^

Zoren 370

Osiris,

The RE11's are Bridgestone Tires right?
What specs are those? Width and sidewall size?

Osiris

Yes, Bridgestone

265/35/19 Front
305/30/19 Rear

I also have a friend that is running RE11's with this setup:

285/35/19
305/30/19

Says the wider front wheels works great for autocross. Noticable difference over the 265's.

__________________

^^^^^^^^^Like our Facebook!^^^^^^^^^

XwChriswX

So you're running a +22 265 up front, no rubbing whatsoever?

This is what size I wanna go to, I have a 255 there now.

Any over/under-steer noticed?

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14

Osiris

No rubbing at all, and i have a 1" drop in the front. But keep in mind the 265 is on a 9.5" wheel vs the 9" stock front. No over/under steer that i've noticed.

__________________

^^^^^^^^^Like our Facebook!^^^^^^^^^

otacon88

It's flush, but it's not hella flush right? lol. I just don't want it poking out from outside of the fender. As long as it's in parallel with it then that's ok

__________________
Performance: FI CBE 18inch resonators and CF mufflers | Pending - CAI
Show: CF License Plate Frame, Amuse Rear Bumper and side skirts, Seibon SR Front lip, Aerojacket Vented Fenders| Pending - SSR Type F, Springs, Tint, Sport Rear spoiler

Osiris

I hate hella flush, so it's a respectable flush, if you go to cars n cafe on the 25th in Orlando, you can see it.

__________________

^^^^^^^^^Like our Facebook!^^^^^^^^^

XwChriswX

Same drop here. Looking forward to getting this setup now.

Hella flush is ridiculous.

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14

Zoren 370

Yup one forum member also suggested that to have a better balance of the car it should have a 20 difference staggered front vs rear.

Whats your camber number on your rear?

Osiris

just so happens that i got an alignment recently! Rear camber is -2.6/-2.5 left/right

A camber kit would bring it into specs, but i've had it like this over 10k miles and haven't had an issue with excessive wear.

__________________

^^^^^^^^^Like our Facebook!^^^^^^^^^

Zoren 370

Wow thats great mine is at -2.0 on both rears. I thought this was already to much of a camber for excessive wear. I do have camber kits.
But at -2.6 and not much wear with the RE11's??? Amazing!
I guess Im safe then with the -2.0
BTW my set up is 255/305 V12

XwChriswX

I'm getting pissed cause every time I go for an alignment the shop either 'doesn't have the specs for a 370Z' or just gives me the alignment for a 350Z. It's annoying, so I have no idea what mine are at.

I'm running a 295 in the back and I have camber arms, but I don't know what the stock specs for this mod should be.

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14