Nissan 370Z Forum  

295/30r19 OK in the rear with 245/40r19 fronts?

I got a nail in my side wall on the rear tire that cant be repaired they say ...I want to replace both rears as they are down to 40-50%

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Wheels & Tires


Reply
 
LinkBack Thread Tools Display Modes
Old 06-27-2012, 01:35 PM   #1 (permalink)
Base Member
 
Phaddi_inc's Avatar
 
Join Date: Apr 2011
Location: Ontario Canada
Posts: 111
Drives: 09 Nissan 370Z 6spd
Rep Power: 14
Phaddi_inc is on a distinguished road
Default 295/30r19 OK in the rear with 245/40r19 fronts?

I got a nail in my side wall on the rear tire that cant be repaired they say...I want to replace both rears as they are down to 40-50% anyway. I can get a really good deal on a slightly used set of 295/30r19 from a friend (bridgestone RE050a, same tire as stock sport wheels). Would I be ok running these in the rear with my 245/40r19's in the front (dont want to replace those as they are still 70+%). Reason im asking is because the overall diameter of the 295/30 will be about .7" smaller than the stock 275/35. If my front and rears are revolving at slightly different rates will that affect the vehicles operation in anyway?

Any advice or insight would be greatly appreciated guys, especially if someone out there is already running this setup...

Thanks
phaddi_inc
Phaddi_inc is offline   Reply With Quote
Old 06-27-2012, 05:19 PM   #2 (permalink)
A True Z Fanatic
 
370Z Purist's Avatar
 
Join Date: Jun 2009
Location: Zion, Illinois
Posts: 1,873
Drives: '09 370Z-T BS M6
Rep Power: 19
370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all
Default

I'm definitely in the same boat as you. Stock sport wheels, thinking of running a slightly larger diameter.

Also, nails in the sidewall are indeed pretty much doomed. It damages a lot of the interior reinforcing and things like that. Sidewall is much weaker and is prone to a lot of shear forces during cornering.

Front and rear revolutions per mile won't really be a big deal. Your fronts aren't linked to your rears, so if anything, your speedometer might run a little off (can't remember how our cars calculate speed).
__________________
-Phil

"Since one of my brake light bulbs just went out, the forum told me that my piston rings are about to blow."
370Z Purist is offline   Reply With Quote
Old 06-27-2012, 05:41 PM   #3 (permalink)
A True Z Fanatic
 
Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521
kenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond repute
Default

Quote:
Originally Posted by 370Z Purist View Post
I'm definitely in the same boat as you. Stock sport wheels, thinking of running a slightly larger diameter.


275x0.35 = 96.25mm height
295x0.30 = 88.50mm height (would look okay if car is lowered).

id do 285/35/19 instead.

or did you mean width?
kenchan is offline   Reply With Quote
Old 06-27-2012, 05:46 PM   #4 (permalink)
Base Member
 
Phaddi_inc's Avatar
 
Join Date: Apr 2011
Location: Ontario Canada
Posts: 111
Drives: 09 Nissan 370Z 6spd
Rep Power: 14
Phaddi_inc is on a distinguished road
Default

Thanks for the reply, I figured the speedometer may be a slight issue (I thought I read somewhere something concerning the VDC with diff wheel diameters, but could have been another vehicle)...I may go ahead and mount them, if Im not happy I'll just cough up the cash for new front wheels, maybe 255/35
Thanks.
Phaddi_inc is offline   Reply With Quote
Old 06-27-2012, 05:56 PM   #5 (permalink)
Base Member
 
Phaddi_inc's Avatar
 
Join Date: Apr 2011
Location: Ontario Canada
Posts: 111
Drives: 09 Nissan 370Z 6spd
Rep Power: 14
Phaddi_inc is on a distinguished road
Default

Quote:
Originally Posted by kenchan View Post


275x0.35 = 96.25mm height
295x0.30 = 88.50mm height (would look okay if car is lowered).

id do 285/35/19 instead.

or did you mean width?
Ya 285/35's would be ideal, but im not that lucky, the 295/30's are basically being handed over to me...
My main concern was that now the front (245/40) will have .7" or so greater diameter than the 295/30's in the rear...Im hoping it wont be visual at all.
Phaddi_inc is offline   Reply With Quote
Old 06-27-2012, 05:57 PM   #6 (permalink)
A True Z Fanatic
 
Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521
kenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond repute
Default

245x0.40 = 98mm vs your 88.5mm rear

that will be very visible, but hell, worth a try if free.
kenchan is offline   Reply With Quote
Old 06-27-2012, 06:02 PM   #7 (permalink)
Base Member
 
Phaddi_inc's Avatar
 
Join Date: Apr 2011
Location: Ontario Canada
Posts: 111
Drives: 09 Nissan 370Z 6spd
Rep Power: 14
Phaddi_inc is on a distinguished road
Default

Quote:
Originally Posted by kenchan View Post
245x0.40 = 98mm vs your 88.5mm rear

that will be very visible, but hell, worth a try if free.
Ya I guess your right, not completely free but definitely worth the investment. The 295's are in great shape...If it looks obvious at all im just going to grab new fronts to better match.

Thanks man
Phaddi_inc is offline   Reply With Quote
Old 06-27-2012, 08:08 PM   #8 (permalink)
KB2
Base Member
 
KB2's Avatar
 
Join Date: Apr 2010
Location: Illinois
Posts: 243
Drives: 370z
Rep Power: 15
KB2 is on a distinguished road
Default

That's what I have. I don't notice much diffrence. But that also isn't something that bothers me. 305's look really aggressive
KB2 is offline   Reply With Quote
Old 06-27-2012, 11:45 PM   #9 (permalink)
A True Z Fanatic
 
370Z Purist's Avatar
 
Join Date: Jun 2009
Location: Zion, Illinois
Posts: 1,873
Drives: '09 370Z-T BS M6
Rep Power: 19
370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all
Default

Quote:
Originally Posted by kenchan View Post


275x0.35 = 96.25mm height
295x0.30 = 88.50mm height (would look okay if car is lowered).

id do 285/35/19 instead.

or did you mean width?
Prep the blood and the quill of death and bring out your ignore list. I meant width.

I also think I read that you can't run 285 rears without slight rub. Spacers are required. I still have no idea if I'd want to think about running different camber, although it's not likely.
__________________
-Phil

"Since one of my brake light bulbs just went out, the forum told me that my piston rings are about to blow."
370Z Purist is offline   Reply With Quote
Old 06-28-2012, 12:07 AM   #10 (permalink)
A True Z Fanatic
 
Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521
kenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond repute
Default

Quote:
Originally Posted by 370Z Purist View Post
Prep the blood and the quill of death and bring out your ignore list. I meant width.

I also think I read that you can't run 285 rears without slight rub. Spacers are required. I still have no idea if I'd want to think about running different camber, although it's not likely.
kenchan is offline   Reply With Quote
Old 06-28-2012, 02:17 AM   #11 (permalink)
A True Z Fanatic
 
Jordo!'s Avatar
 
Join Date: May 2010
Location: nirvana
Posts: 6,394
Drives: 2023 NATM
Rep Power: 418
Jordo! has a reputation beyond reputeJordo! has a reputation beyond reputeJordo! has a reputation beyond reputeJordo! has a reputation beyond reputeJordo! has a reputation beyond reputeJordo! has a reputation beyond reputeJordo! has a reputation beyond reputeJordo! has a reputation beyond reputeJordo! has a reputation beyond reputeJordo! has a reputation beyond reputeJordo! has a reputation beyond repute
Default

What was the final consensus on 305's in the rear?

Last search led me to mixed conclusions (i.e, rubs vs. perfectly fine)...

Oh, for anyone who wants to see the effect on speedo -- Tire size calculator
__________________
Enjoy it. Destroy it.
Jordo! is offline   Reply With Quote
Old 06-28-2012, 08:59 AM   #12 (permalink)
Base Member
 
Rockcrawler's Avatar
 
Join Date: Jan 2012
Location: Tulsa, OK
Posts: 141
Drives: 09 6MT, tr, spt, nv
Rep Power: 13
Rockcrawler is on a distinguished road
Default

I'm about to run the same rear size but with a 275/35 front. same diameter delta. not worried a bit. in theory the headlights will be a bit higher.

mine are specced at .6" difference, remember, only half that on a radius, not that substantial.

I'm timid about lowering due to local streets and in and out of my parking garage, already tickle the black chin spoiler and the exit has a breakover that I clear now, but can't be by much
__________________
2009 silver sport, 6MT touring and nav, 8700 miles when I got it, "almost" a daily driver now... bone stock aside from tint and Gemini CBE, PC'd Rays black stardust and running 275/295 DWS rubber
Rockcrawler is offline   Reply With Quote
Old 06-28-2012, 09:38 AM   #13 (permalink)
A True Z Fanatic
 
370Z Purist's Avatar
 
Join Date: Jun 2009
Location: Zion, Illinois
Posts: 1,873
Drives: '09 370Z-T BS M6
Rep Power: 19
370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all370Z Purist is a name known to all
Default

Since my rears have balded, I've been staring at RE11s, trying to find a solution that works. They apparently don't come in the stock sport package size, so I'm trying to see just how wide I can go with minimal investment.

If all I need are some spacers to go with extra wide rears (305/35R19) and widened fronts (275/40R19), then it sounds very attractive, so long as there's no insane amount or rub or whatever. I'm still running a stock suspension, and the only thing I'll end up doing in the near future is probably a set of tein springs for a mild drop. I don't want rub!


Quote:
Originally Posted by Jordo! View Post
What was the final consensus on 305's in the rear?

Last search led me to mixed conclusions (i.e, rubs vs. perfectly fine)...

Oh, for anyone who wants to see the effect on speedo -- Tire size calculator
The meaty tire thread was something I was reading up on; ironically, people with the widest tires say the least about how they went about their choice. Universally, it seems spacers are required.

370z Meaty Tire Thread
__________________
-Phil

"Since one of my brake light bulbs just went out, the forum told me that my piston rings are about to blow."

Last edited by 370Z Purist; 06-28-2012 at 09:46 AM.
370Z Purist is offline   Reply With Quote
Old 06-28-2012, 10:04 AM   #14 (permalink)
A True Z Fanatic
 
90 ST's Avatar
 
Join Date: May 2010
Location: Calgary
Posts: 1,861
Drives: 90 and 15 GMC Sierra
Rep Power: 421
90 ST has a reputation beyond repute90 ST has a reputation beyond repute90 ST has a reputation beyond repute90 ST has a reputation beyond repute90 ST has a reputation beyond repute90 ST has a reputation beyond repute90 ST has a reputation beyond repute90 ST has a reputation beyond repute90 ST has a reputation beyond repute90 ST has a reputation beyond repute90 ST has a reputation beyond repute
Default

i run stock suspension with stock size fronts, and a 305/30 rear with no spacer, and i still have a lot of room.
90 ST is offline   Reply With Quote
Old 06-28-2012, 11:43 AM   #15 (permalink)
A True Z Fanatic
 
cossie1600's Avatar
 
Join Date: Jun 2009
Location: californee way
Posts: 5,380
Drives: 370, Leaf
Rep Power: 30
cossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond repute
Default

I run 285 all around on stock rims and suspension. not rubbing..
cossie1600 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[FOR SALE] two OEM front tires 245/40R19 kent370 Parts for sale (Private Classifieds) 4 04-22-2012 04:42 PM
[WTB] Trading my Sport Package rear wheels (19x10) for fronts (19x9) Scion Parts for sale (Private Classifieds) 18 03-27-2012 11:25 PM
[FOR SALE] FS/IL>Advan RG-D Gold 19x10.5 +25 w/ Hankook V12 275/30R19 $3000 Local Pickup raytrix Parts for sale (Private Classifieds) 4 10-08-2011 10:27 AM
WTB: HR spacers 15mm fronts 20mm rear Z Monster Wanted 0 04-27-2011 01:19 AM
Stock Rays + 265/35R19 (or) 255/40R19 Fronts, 305/30R19 (or) 285/35R19 Rears kannibul Wheels & Tires 7 02-10-2010 09:53 AM


All times are GMT -5. The time now is 07:50 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2