FYI barrels can now be annodized or painted

We just got some MS3 in 19" and SP3 in 18", 19", & 20" in stock. Only 1 set of each.

in 370Z fitment: MS3 in 19" and SP3 in 18", 19", & 20" in stock here in the USA

kami-what is a typical lead-time to order SSR?

depends on what you order, some things they have instock

when not instock, the 1 piece take anywhere from 6-12 weeks, 3 peice wheels in standard color without any special finish or barrel takes 8-12, and if you do any special color or anodized barrel expect an additional 4-6 weeks.

Seems like they are doing the same thing as the new'ish BBS wheels, little things that would make me go crazy. Wheels do look great though:

http://img651.imageshack.us/img651/2111/lmrb.jpg

yea the bi-spoke design is common from a lot of companies, they're all differentiated by subtle differences though, its a brand thing haha some people like that brand name or the choice of different face and barrel colors

hi kami-thanks for the info.

on these MS3 and SP1's how do you tell the brake caliper clearance? i looked at SSR's site and their wheel charts, but I dont think they mention this critical info.

i want conservative offsets so the caliper clearance is going to be important. :)

http://www.ssr-wheels.com/wheels/whe...keepThis=true&

also, wat does this mean?

"*Wheel Disk sticks out from wheel rim with Rim depth 34mm. "

well they have their own caliper charts that they advise us on, basically they'll let us know what wheel face will clear certain brakes, whether it be OEM or aftermarket. So if you need to find out of something clears let me know and I will find out what specs you need.

for the MS3, is HP the only ones that work on our sport package akebono's? i know the rear calipers are much smaller so can probably do the other ones less SL.

the confusion originates from my SSR GT-03 which are HP disk that clears brembo on my G, but cannot clear akebono's on my Z.

updates, kami? what did ssr say? :)

The Akebono brakes from the Z are bigger than the brembos from the Z/G. And different wheels have different faces. The GT03 has a relatively flat face.

for the MS3, you should be able to do MD disk front, SL disk rear in 19" or 20"

Would it be safe to say that the disk that works for the SP line would be applicable to the MS3's

So a 19" MD disk on an SP1 would have the same fitment as a 19" MS3? I believe so, just want to confirm

OK here is the break down for 19's for akebono:

GT-03: need HP in the front and NR in the bkac
MS3: MD and SL
SP1: MD and SL (but MD is only 2mm clearance so HP is safer)
SP3 and MS1: HP and NR