Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   trying to decide on wheel sizes (http://www.the370z.com/wheels-tires/5502-trying-decide-wheel-sizes.html)

nogoodname 06-13-2009 04:12 PM

i'm just not getting it right now........lol

i'm still not getting something....

Caravanshaka 06-13-2009 10:41 PM

Quote:

Originally Posted by nogoodname007 (Post 90270)
i'm just not getting it right now........lol

i'm still not getting something....

haha, think of it as a percentage

25 series aspect ratio is going to have sidewall height 25% of the width of the tire

so a truck with 50 series will have 50% sidewall height :icon18:

nogoodname 06-13-2009 11:01 PM

ooohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh...... makes much more sense

travisjb 06-14-2009 01:23 AM

Quote:

Originally Posted by Argos (Post 89723)
just got my 370z about two weeks ago and im looking at , some "petrol vengeance" wheels , i was looking at getting 20x8.5 in the front and 20x10 in the rear , do u guys think it will have an aggressive enough look , with the 370's wide rear flare out ? i dont want them too look to sunken in . or should i just start looking for 20's that come wider than 10 inches ? and if so can u guys throw out some suggestions of brands ?

forgestar... search for it... 18s are lightest and won't look as small in black or darker color... 19s are also plenty big when car is dropped

Argos 06-14-2009 01:18 PM

not planning on dropping the car , i dont want to mess up the ride feel and i already scrap everything when just everyday driving

nogoodname 06-14-2009 01:20 PM

^^ really....the G/Z is pretty high stock......the G never scrapped anything here.......driving in the dunes or what...lol.....

travisjb 06-14-2009 01:47 PM

this car is jacked up like a 4x4... need to drop

Argos 06-14-2009 04:56 PM

i live in south fl , i just noticed i scrape the bottom front end on almost every parking lot i drive out of , its mostly because of all the rain ditches i think . they make them pretty deep down here were about a meter below the water table , and we get tons of rain from june - nov (hurricane season). im not scraping the actual bumper , but the bottom of it

nogoodname 06-14-2009 05:00 PM

here, there no ditches like that, only in the old part of town....it's all sewers and manholes...

Plasmaball 06-14-2009 05:09 PM

HRE Performance Wheels – Monoblok Series for Nissan GTR

Ok i am trying to figure this out for when i buy rims.
The above is what i like honestly. hre m45's.

should i just stick with 19" or go with the 20" and then maybe 19 up front?
I have the basic understanding of what offset is.

Are you guys saying if you have a lip you are more stable?

nogoodname 06-14-2009 05:12 PM

^^ not really, lips are for looks and to extend the rim as far as possible to the fender for flush'ness.


HRE's are quite costly, nice rims though

Argos 06-14-2009 06:33 PM

go with 20's all around , personally i never liked the two diameter rims set up , looks ok on some american muscle cars not z's

Argos 06-14-2009 07:16 PM

btw HRE are awesome wheels

Argos 06-14-2009 11:38 PM

so basically if i find a wheel i like with a bolt pattern of 114.3 by 5 and in these sizes , with these size tires i should be pretty much set.... no rubbing , no tire stretching , no driving problems ... is a 25 aspect ratio for the back too low especially for everyday driving ?

20X9.5____255-30-20
20X12_____305-25-20

travisjb 06-15-2009 12:19 AM

go bigger (wider) in front... remember this car is about 56/44 front/rear weight distribution


All times are GMT -5. The time now is 05:45 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2