![]() |
Question on new tires...
It is my DD, with NO track use. I want to go 255 in the front and 295 in the rear... Good idea or bad?
I am looking at the HANKOOK VENTUS V12 EVO K110 for front and rear. Would these be good for me? Is there something with a better tread rating? Basically the stock Yoko's are SHOT after 9500 miles... |
You are sacrificing grip for better wear, just don't do anything stupid.
|
anyone have any input?
|
Quote:
|
Quote:
|
Quote:
|
The aspet ratio IMO is a bit to low as well. Not enough sidewall. I'd personally be more comfortable with a 265/35/19 up front and a 305/30/19 out back. exact match for the front but wider would be a 275/35/19 fyi.
|
Quote:
|
Quote:
I'm personally looking to go with 275/35/19 fronts with 285/35/19 rears next go around to try to get a more neutral handling car, assuming the front tires won't rub etc with my wheel offsets (I have aftermarket wheels). |
Quote:
|
Quote:
|
Sidewall is going fro 3.9" to 3.5" is that a big difference?
|
looks like I'm going to stick with stock size for now... anyone have any experience with the hankooks?
|
I have the V12s in stock sport size and I hate them mostly due to lack of traction...like you the Z is my DD and I came from the stock Potenza which I thought were much better than the V12s...I got my V12s and I had a bad vibration of which I later came to find out that 2 of the tires were out of round and 1 was at limit of being out of round so of the 4 tires I got from hankook basically 3 were bad...I would recommend against getting the V12s...if your looking to not spend a lot on tires then I have read that people on here like the Continentals but I don't have any experience with them...my next set is either going to be the RE11s or the Michelin PSS...hope this helps
|
what about a 275/35/19 up front and 305/30/19 out back?
Any negative points about that setup? |
All times are GMT -5. The time now is 02:39 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2