Reference: Wheel Spacers for 18" base wheels

kenchan · 12-05-2013, 02:11 PM

ichiba's are lower quality and heavier than the H&R's and Eibach's i have, but does the job.

Catchin-Z's · 12-05-2013, 04:23 PM

Thanks for the additional info.

Curious to know what the weight difference is between the Ichiba/H&R/Eibach.

Any references out there to compare?

Huck · 12-08-2013, 09:41 AM

I have a set of 20/25mm H&R spacers, I can try to weigh them when I get home and see what they run.

Here's my contribution pics, I just got Z1 25f/20r mm spacers, dropped on swifts.

Zdayz 2014!!

Catchin-Z's · 12-08-2013, 10:41 AM

Looks great Huck ! how much drop do you have ?

Very much appreciate you going through the trouble of weighing, but please not just on my account !

Regarding the becoming a premium member - yes in the works and getting that done

Huck · 12-08-2013, 10:45 AM

Thanks man, I never took the time to measure the amount of drop I got but per Swift's website it should be 1.2 and 1.0 inches. Gimme a second and I'll get a pic from the side so you can see better.

Zdayz 2014!!

Huck · 12-08-2013, 10:57 AM

Forgive the stupid filters, I just did that so you could see the tire and the gap a little better. I'm not emo, I swear.

Zdayz 2014!!

Huck · 12-08-2013, 10:57 AM

Zdayz 2014!!

Huck · 12-08-2013, 10:59 AM

Zdayz 2014!!

Catchin-Z's · 12-08-2013, 11:52 AM

That looks super sweet, not too low but fills the gap nicely in my opinion.

Thanks for the great ref pics. plus helping out on the "18" incher thread

with more info.

We need some love and others to chime in so we can give these 19/20 folks/thread a run !

Huck · 12-08-2013, 03:08 PM

Thanks man, I'm trying To decide between 18s and 19s right now. I want something super concave and right now that's only in 19s.

BTW I weighed my spacers, I have 20mm ones and all 4 of them weighed 5.6lbs not including the extended studs.

Zdayz 2014!!

Catchin-Z's · 12-09-2013, 04:03 PM

Thx again !

As soon as I get my greedy hands on the spacers I'll weigh mine and work on setting up some Database for easy ref for others.

Love to go concave but new rims (given the mine are (stock) are all of 1.5 month old and less than 900 miles) is a long way away.....

hughdogz · 01-01-2014, 08:49 PM

I installed 25/20 F/R bolt-on spacers from Z1 today, on 2009 with stock springs and Goodyear Eagle F1 tires (245/275 width)
The fronts are flush, but the tires poke a bit on the rears

I think 15mm rears would be better...maybe even 10mm.
I'll see if I can get a shot from the rear to show it better.

Trutactix · 03-07-2015, 10:01 PM

So for flush on 18s what should I be using with and without swifts? Just incase I lower in the future?

dvboy · 09-11-2015, 09:19 PM

I have been looking for pics of the newer base wheels with spacers,haven't found any so I just went ahead and installed 20/20.To me it looks like a perfect fit,my suspension is 100% stock.

celiboom · 02-18-2016, 03:02 PM

Someone ever heard of Garage Line hubcentric spacers? they are good quality? did someone went with 25 mm front 20mm rear on base 18" ?

12-08-2013, 09:41 AM	#18 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	I have a set of 20/25mm H&R spacers, I can try to weigh them when I get home and see what they run. Here's my contribution pics, I just got Z1 25f/20r mm spacers, dropped on swifts. Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-08-2013, 10:45 AM	#20 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Thanks man, I never took the time to measure the amount of drop I got but per Swift's website it should be 1.2 and 1.0 inches. Gimme a second and I'll get a pic from the side so you can see better. Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-08-2013, 10:57 AM	#21 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Forgive the stupid filters, I just did that so you could see the tire and the gap a little better. I'm not emo, I swear. Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-08-2013, 10:57 AM	#22 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-08-2013, 10:59 AM	#23 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-05-2013, 02:11 PM	#16 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	ichiba's are lower quality and heavier than the H&R's and Eibach's i have, but does the job.

12-05-2013, 04:23 PM	#17 (permalink)
Catchin-Z's Base Member Join Date: Oct 2013 Location: Parker, Colorado, USA Posts: 75 Drives: 2013 370Z Magma Red Rep Power: 12	Thanks for the additional info. Curious to know what the weight difference is between the Ichiba/H&R/Eibach. Any references out there to compare?

12-08-2013, 10:41 AM	#19 (permalink)
Catchin-Z's Base Member Join Date: Oct 2013 Location: Parker, Colorado, USA Posts: 75 Drives: 2013 370Z Magma Red Rep Power: 12	Looks great Huck ! how much drop do you have ? Very much appreciate you going through the trouble of weighing, but please not just on my account ! Regarding the becoming a premium member - yes in the works and getting that done

12-08-2013, 11:52 AM	#24 (permalink)
Catchin-Z's Base Member Join Date: Oct 2013 Location: Parker, Colorado, USA Posts: 75 Drives: 2013 370Z Magma Red Rep Power: 12	That looks super sweet, not too low but fills the gap nicely in my opinion. Thanks for the great ref pics. plus helping out on the "18" incher thread with more info. We need some love and others to chime in so we can give these 19/20 folks/thread a run !

12-08-2013, 03:08 PM	#25 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Thanks man, I'm trying To decide between 18s and 19s right now. I want something super concave and right now that's only in 19s. BTW I weighed my spacers, I have 20mm ones and all 4 of them weighed 5.6lbs not including the extended studs. Zdayz 2014!! ZX_man likes this. __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-09-2013, 04:03 PM	#26 (permalink)
Catchin-Z's Base Member Join Date: Oct 2013 Location: Parker, Colorado, USA Posts: 75 Drives: 2013 370Z Magma Red Rep Power: 12	Thx again ! As soon as I get my greedy hands on the spacers I'll weigh mine and work on setting up some Database for easy ref for others. Love to go concave but new rims (given the mine are (stock) are all of 1.5 month old and less than 900 miles) is a long way away.....

01-01-2014, 08:49 PM	#27 (permalink)
hughdogz Base Member Join Date: Oct 2012 Location: Portland, Oregon Posts: 35 Drives: 370Z, 280ZXT, 240Z Rep Power: 13	I installed 25/20 F/R bolt-on spacers from Z1 today, on 2009 with stock springs and Goodyear Eagle F1 tires (245/275 width) The fronts are flush, but the tires poke a bit on the rears I think 15mm rears would be better...maybe even 10mm. I'll see if I can get a shot from the rear to show it better. __________________ OS Giken clutch and LSD w/ ZSpeed HD CSC and Nismo finned cover \| Goodyear Eagle F1's Last edited by hughdogz; 01-01-2014 at 09:01 PM. Reason: added photo

03-07-2015, 10:01 PM	#28 (permalink)
Trutactix Base Member Join Date: May 2014 Location: Florida Posts: 225 Drives: 09 370z MB 7AT Rep Power: 11	So for flush on 18s what should I be using with and without swifts? Just incase I lower in the future?

09-11-2015, 09:19 PM	#29 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 26	I have been looking for pics of the newer base wheels with spacers,haven't found any so I just went ahead and installed 20/20.To me it looks like a perfect fit,my suspension is 100% stock. Memphis370Z and MenZerna like this.

02-18-2016, 03:02 PM	#30 (permalink)
celiboom Base Member Join Date: Jul 2015 Location: canada Posts: 115 Drives: 370z 2016 Rep Power: 205	Someone ever heard of Garage Line hubcentric spacers? they are good quality? did someone went with 25 mm front 20mm rear on base 18" ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spacers on base wheels	nynhex	Wheels & Tires	17	04-30-2012 11:48 PM
Spacers on Base Wheels	christian370z	Wheels & Tires	2	10-18-2010 09:17 AM
Question on wheel spacers with OEM wheels.	atx370z	Wheels & Tires	19	08-17-2010 01:01 PM
Please help- Wheel locks for base model 18" wheels	Steven	Wheels & Tires	1	10-05-2009 03:17 PM
wtb base 18" rear wheel	yoozef	Wanted	0	08-01-2009 05:09 PM