Wheel specs without having to use spacers

reddevil2009 · 03-29-2012, 03:49 AM

Ok so, im about to get a set of 20" wheels to stance and stagger my Z. I need specs for 20s so that i dont have to use spacers. Any help will be greatly appreciated.

Volk Z · 03-29-2012, 10:46 AM

I will give you a run down of different stances and the specs that you would need to achieve. Here ya go bro

Mild- 20x9.5(+22) 20x10.5(+22)
Aggressive 20x9.5(+18) 20x10.5(+0)----- Best choice in my opinion.
Very Aggressive 20x9.5(+12) 20x10.5(-5)

Attached pic is right around the "aggressive" specs i gave you... (give or take a couple MM)
(Double click pic to blow it up)

TerribleONE · 03-29-2012, 11:55 AM

Quote:

Originally Posted by Volk Z

I will give you a run down of different stances and the specs that you would need to achieve. Here ya go bro

Mild- 20x9.5(+22) 20x10.5(+22)
Aggressive 20x9.5(+18) 20x10.5(+0)----- Best choice in my opinion.
Very Aggressive 20x9.5(+12) 20x10.5(-5)

Attached pic is right around the "aggressive" specs i gave you... (give or take a couple MM)
(Double click pic to blow it up)

would probably be your best bet

kenchan · 03-29-2012, 12:12 PM

stock height front: 9 or 9.5in width ET +30 to +35 / rear: 10.5in width +15 to +20

lowered front: 9 or 9.5in width ET +24 to +28 / rear: 10.5in width +8 to +14

Volk Z · 03-29-2012, 02:42 PM

Quote:

Originally Posted by kenchan

stock height front: 9 or 9.5in width ET +30 to +35 / rear: 10.5in width +15 to +20

lowered front: 9 or 9.5in width ET +24 to +28 / rear: 10.5in width +8 to +14

Kenchan will you throw some pics of your current setup? I know you have some nice wheels and good offsets

-Chad

daisuke149 · 03-29-2012, 02:46 PM

id say 20x10 + 27 with a 275 /30 / 20 tire. Keeps you at OEM diameter and flush if your not lowering your car or running crazy camber. Also this way the tires dont have that awful stretched look.

match that with a 20x12 + 25 with a 325/25/20 tire for the same results in the back.

if you wanna go low and run camber, then do a 20x10 + 22 front and 20x12 + 20 rear or more depending on how low / how much camber.

kenchan · 03-29-2012, 04:04 PM

Quote:

Originally Posted by Volk Z

Kenchan will you throw some pics of your current setup? I know you have some nice wheels and good offsets

-Chad

thanks, for picts check out my albums page.

vividracing · 03-29-2012, 04:27 PM

Soooooo many possible combinations. Do want very little camber, w/ meaty tires? Do you want crazy camber w/ stretched tires? Mild stretch w/ mild camber?

Post some pics of the stance you're looking for. Or, even better... Go out to your car and do some measuring.

These links are all useful when figuring out stance.

http://www.ccwheel.com/incs/technica...rter/index.php
Tire Size Calculator - tire & wheel plus sizing
Wheel Offset Calculator
RIMTUCK.com - Wheel Fitment Database
Tyrestretch.com - Image Library

Volk Z · 03-30-2012, 11:14 AM

Quote:

Originally Posted by kenchan

thanks, for picts check out my albums page.

I saw your pics... What wheels are you sporting? And are you running spacers?

They look great!

KaienZ34 · 03-30-2012, 12:50 PM

Ok i sold my volk GT-30's to my friend. He put them and some spacer on his black 370. He is lowered about 3" front and rear on coilovers, his specs now are 20x9.5+10 front and 20x10.5 -5 in the rear. He is runnings some camber in ther rear and the tires are 255/30/20 F. & 305/25/20 R.

Lots of other pics in here but his is the black 370 w/Volks.

*Mini Z-Day Meet Picture thread!*

Super Red Z · 03-30-2012, 05:52 PM

Quote:

Originally Posted by kenchan

stock height front: 9 or 9.5in width ET +30 to +35 / rear: 10.5in width +15 to +20

lowered front: 9 or 9.5in width ET +24 to +28 / rear: 10.5in width +8 to +14

What u do is kind a sound good to me. What u use to lower your car and how many inches?

kenchan · 03-30-2012, 05:55 PM

Quote:

Originally Posted by Super Red Z

What u do is kind a sound good to me. What u use to lower your car and how many inches?

my car is stock height.

kenchan · 03-30-2012, 05:59 PM

Quote:

Originally Posted by Volk Z

I saw your pics... What wheels are you sporting? And are you running spacers?

They look great!

thanks those are Weds SA55M's. im running 5mm spacers on the front.

Front 19x9 ET38 (+ 5mm spacers) 245/40/19 continental DW
Rear 19x10.5 ET15 275/35/19 continental DW

got the set from tirerack.com (x294 Alex).

Super Red Z · 03-30-2012, 06:36 PM

Quote:

Originally Posted by reddevil2009

Ok so, im about to get a set of 20" wheels to stance and stagger my Z. I need specs for 20s so that i dont have to use spacers. Any help will be greatly appreciated.

Reddevil... Every recommend is good on their preference. One thing that u have to keep in mind that every specs is different on the height of your car too.please mention it too.I alway go with 20" and my third set forged wheels is on the way.

370z-Fanatic · 08-06-2013, 01:55 PM

Im thinking of going with these one of two ( 19x9.5 +22 , 19x11 +15 ) or (19x9.5+22 +5mm spacer , 19x10.5 +0)

03-29-2012, 03:49 AM	#1 (permalink)
reddevil2009 Base Member Join Date: Mar 2012 Location: Atlanta Posts: 2 Drives: 12 370Z Blk/Sp/Tr/A7 Rep Power: 13	Wheel specs without having to use spacers Ok so, im about to get a set of 20" wheels to stance and stagger my Z. I need specs for 20s so that i dont have to use spacers. Any help will be greatly appreciated.

03-29-2012, 04:27 PM	#8 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 38 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 39	Soooooo many possible combinations. Do want very little camber, w/ meaty tires? Do you want crazy camber w/ stretched tires? Mild stretch w/ mild camber? Post some pics of the stance you're looking for. Or, even better... Go out to your car and do some measuring. These links are all useful when figuring out stance. http://www.ccwheel.com/incs/technica...rter/index.php Tire Size Calculator - tire & wheel plus sizing Wheel Offset Calculator RIMTUCK.com - Wheel Fitment Database Tyrestretch.com - Image Library __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

03-30-2012, 12:50 PM	#10 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Ok i sold my volk GT-30's to my friend. He put them and some spacer on his black 370. He is lowered about 3" front and rear on coilovers, his specs now are 20x9.5+10 front and 20x10.5 -5 in the rear. He is runnings some camber in ther rear and the tires are 255/30/20 F. & 305/25/20 R. Lots of other pics in here but his is the black 370 w/Volks. Mini Z-Day Meet Picture thread! __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Official] 370z wheel fitment guide (pics/specs) only	ilive2win	Wheels & Tires	336	03-09-2024 09:40 PM
[FOR SALE] Z1 20 mm wheel spacers	Th3 On3	Parts for sale (Private Classifieds)	14	03-25-2012 10:59 PM
Roadster 18" wheel specs ?	chuckd05	Nissan 370Z Roadster (Convertible)	6	08-18-2011 04:19 PM
Are these the perfect wheel specs for a 370Z?	Juruki	Wheels & Tires	22	05-14-2010 12:18 PM
lug nut/wheel lock torque specs	Hi-Step'n370Z	Wheels & Tires	2	03-18-2010 04:37 PM

03-29-2012, 12:12 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	stock height front: 9 or 9.5in width ET +30 to +35 / rear: 10.5in width +15 to +20 lowered front: 9 or 9.5in width ET +24 to +28 / rear: 10.5in width +8 to +14

03-29-2012, 02:46 PM	#6 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	id say 20x10 + 27 with a 275 /30 / 20 tire. Keeps you at OEM diameter and flush if your not lowering your car or running crazy camber. Also this way the tires dont have that awful stretched look. match that with a 20x12 + 25 with a 325/25/20 tire for the same results in the back. if you wanna go low and run camber, then do a 20x10 + 22 front and 20x12 + 20 rear or more depending on how low / how much camber.

08-06-2013, 01:55 PM	#15 (permalink)
370z-Fanatic Base Member Join Date: Apr 2013 Location: Saint Petersburg Posts: 6 Drives: 10 Nissan 370z C A6 Rep Power: 12	Im thinking of going with these one of two ( 19x9.5 +22 , 19x11 +15 ) or (19x9.5+22 +5mm spacer , 19x10.5 +0)