RPF1's????
 

http://www.the370z.com/members/cavem...terywheels.jpg


I could have sworn they didn't fit the 370Z...Anyone have any insight??? :yum:

Anyone know size, offset, etc??

AME Tracers ^^

Crap...impossible to get...just my luck. Any others that look like these in a light weight configuration??

Was hoping to cheap N light but it appears that won't happen so far as I know.

EDIT: waist of a thread...ops :(

AMEs are available in the US; there's actually an AME North America.
https://www.facebook.com/AME.WHEELS.NA

Have a look at Weds SA60Ms too; they only come in 18s, but they look similar.

I like them but just not the right size. Was hoping for a 19x10 and 19x11 or 19x9.5 and 19x10.5...light weight and cheap.

These look similiar, not sure if the size will be right in 19" though.

M368 - Avant Garde Wheels

Pm Getyourwheels on here and he can give you the details. He is the avante garde go to guy. Great customer service also ;)

See those are really nice! but the size...they have 19x9.5 just wish they had 19x10.5

Wedsport SA55M (21 pounds a piece
19x9.5+15
19.10.5+15

They are like 2200 for the set... Made in Japan too :)

:werd:

if you're going for the weds, they now offer 19x9.5 ET24 for the front. better fit than ET15.

i personally use ET38 with a 5mm spacer for the front. it's the Front face one too. not a big fan running Rear face on the front on RWD cars.

Those wheels a sharp. Hehe.

http://i51.photobucket.com/albums/f3...Z/84495822.jpg



I think I like the CE28's better...any other alternatives?



http://fatlace.com/lacedup/wp-conten...1/03/370_1.jpg

Whats the difference between the front and rear faces?

There's a guy selling a set of these AME wheels on the "other" z forum.

Rep'd :tiphat:

Actually those are AME TM-O2's :tiphat:

Member SPOHN has a set on his 370z:

http://i1109.photobucket.com/albums/...53520572_n.jpg

There are a few sets for sale if you do some digging

Light and cheap generally do not go hand in hand, however light and reasonable might. Try pickiing up a used set of Wedssports or something similar

Dude you were asking for inexpensive light wheels! I gave you the wedsport idea cause they are inexpensive for a light wheel....

yes the CE28 is beautiful and is also 3900 for the set.... Vs 2200 for the wedsport...

I have owned numerous sets of Volks, they are great wheels and there is a reason i keep going back to them. I gave you input on what you asked. Now give me a rep haha :happydance:

front face has shallower concave but spokes protrudes past the lip for brake caliper clearance. it's a very dramatic look when coupled with the rear face on the rear. rear face has deep concave and minimal protrusion past the lip. imho, that's how RWD cars should look when running aftermarket tuner type wheels.

:drool:

:excited:

Wow, so nice.

I had Forgestars for my Rx8. 18x10 that weighed 18 ish lbs for $1300. That is light and cheap. Same with the RPF1's...about the same price and weight. I know this is a different car...that's the reason I am being patient to see what comes out. I honestly don't like the look of the forgestars on the 370Z so we shall see what I decide on.

The Wedsports do not come in the size I would want. The price is much better but I'd rather spend more to be happy. Either way still looking.

:tiphat:

your car your choice. :tup:

You mentioned forgestars, the F14 is similar to what you're looking for. Can't remember the exact weight, but they're it super heavy, and they have a variety of finish options.


Sent from my iPizzle using magic and new fangled science stuff.

I had the F14's on the Rx8...I just hate the way they look on the Z. Does not flow well in my opinion.

But on the Rx8...Whoa mama...

http://i786.photobucket.com/albums/y...4/IMG_0827.jpg

can anyone tell me, where i can get the canards and front windsplitter for the nismo

I mean, everyone is entitled to their opinion.


BUT HOW CAN YOU SAY THAT?!?! Lol the F14's on the 370Z are sex incarnate to me lol

http://i62.photobucket.com/albums/h9...s/fe5d5850.jpg


Sent from my iPizzle using magic and new fangled science stuff.

Those are Avant Guards :ugh2: :wtf2:

They are actually nice on that NISMO I like them but they would need to be 20's to look good and have the width I would like in the front. I just don't think 20's are a good idea for a car I will track.

Yeah I had a retarded moment lol, sorry.

Hers the pic I meant to post.

http://i62.photobucket.com/albums/h9...s/723c6cc9.jpg


Sent from my iPizzle using magic and new fangled science stuff.

They just don't wow me like they did on the Rx8...I was seriously thinking of keeping the Forgestars so I went looking for pics and they were :yawn: on the 370. Maybe they just need to be more concave...I hate the flat look unless it has a lip like the CE28...HA-MAZING! The fronts on the 370 pic you posted are WAY flat.

I could be wrong but I thought I saw some about a concave version somewhere here on the forums. Lots deeper wells for the back.


Sent from my iPizzle using magic and new fangled science stuff.

Doesnt flow well :icon14: I, as well as MANY forum members believe its one of the nicest wheels on a 370. It flows way better on the Z that that rx8, IMO.

http://i98.photobucket.com/albums/l265/avryan/img1.jpg

http://i98.photobucket.com/albums/l2...1308522113.jpg

Here are my 18" RPF1's. Sorry for the shitty cell phone pic

http://farm7.staticflickr.com/6236/6...10afc1b8_b.jpg

This??
http://www.the370z.com/parts-sale-pr...las-vegas.html

Those look alot better...wonder how they would look on the 370...hmmm

BTW...In order to get concave on the Forgestars they have to be 10 inch wide or more.

Size? Offset?

prob 18x9.5 +15 f and 18x10.5 +15 rear. Doesnt look bad a taller tire and moar drop needed though.

Chris

Correct. I like it that way. I have a staggered setup w much less concave in front than the rear, the way a RWD should be.

What size and offset are those rpf1s? The ones I test fitted hit the brake.

yup im quite interessted to know !
I just wonder if they would fit the AP Racing bbk

yeah the 10'' +38 doesnt fit my BBK on the front.